Sharp An Pr1500h Operation Manual

							21
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use
Set up menu Selectable parameters (* indicates default setting) DescriptionLANGUAGE 
SET UPSUBTITLE LANG ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
OFFSelect the subtitle displayed on the TV screen.
MENU LANG ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIANSelect the disc menu language.
DivX [R] VOD REGISTRATION 
        CODE
********
SHARP provide you the DivX registration code that allows you to rent and
purchase videos using the DivX service. Please go to www.divx.com/vodfor more information.
AUDIO
SET UPAUDIO OUT SP DIF/OFF
SP DIF/RAW
SP DIF/PCM*Useful whilst using HDMI cable. When playing a disc recorded with Dolby
Digital or DTS, the corresponding digital signals will be output from the
HDMI output socket.
zPCM : Choose this setting if the HDMI TV cannot support Dolby Digital
or DTS to avoid noise or mute from the TV.
zRAW : Choose this setting if the HDMI TV can support Dolby Digital or
DTS.
 
						

							AN-PR1500H_EN.fm 06/3/14
TINSEA127AWZZ
22
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
Preparation for Use
Changing the set up menu (continued) Set up menu Selectable parameters (* indicates default setting) DescriptionVIDEO 
SET UPBRIGHTNESS To  adjust TV screen brightness level.
CONTRAST To adjust TV screen contrast level.
HUE To adjust TV screen hue level.
12
10
8
04
2612
10
8
04
26+6
+4
+2
0
-2
-4-6
 
						

							23
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use
Set up menu Selectable parameters (* indicates default setting) Description
SATURATION To adjust TV screen saturation level.
HDMI OUTPUT 480P/576P
720P*
1080 ITo select HDMI resolution.
DIGITAL
SET UPDYNAMIC RANGE Dynamic Range Control can be set from OFF to FULL.
FULL     :     Dynamic Range Control set to maximum.
OFF
       
:     Dynamic Range Control set to off.
EXIT 
SET UPThe setting is completed.
12
10
8
0 4
26Full
6/8
4/8
OFF2/8
 
						

							AN-PR1500H_EN.fm 06/3/14
TINSEA127AWZZ
24
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
Preparation for Use
Changing the set up menu (continued)
						

							25
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use

						

							AN-PR1500H_EN.fm 06/3/14
TINSEA127AWZZ
26
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
Preparation for Use
General control

						

							27
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use

						

							AN-PR1500H_EN.fm 06/3/14
TINSEA127AWZZ
28
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
Preparation for Use
Setting the clock (Remote Control only) 
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the   or   button to display the time.
The time display will appear for about 10 seconds.Note:The “CLOCK” will appear or time will flash to confirm the time display when the AC
power supply is restored after a power failure or unplugging the unit. If incorrect,
readjust the clock as follows.To readjust the clock:Perform “Setting the clock” from step 1. If the “CLOCK” does not appear in step 3,
step 4 (for selecting the 24-hour or 12-hour display) will be skipped.To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the   or   button to select “CLOCK”,
and press the MEMORY/DIMMER button.
4
Press the   or   button to select 24-hour or 12-hour display and
then press the MEMORY/DIMMER button.
   “0:00” The 24-hour display will appear.
  (0:00 - 23:59)
   “AM 12:00” The 12-hour display will appear.
  (AM 12:00 - PM 11:59)
   “AM 0:00” The 12-hour display will appear.
  (AM 0:00 - PM 11:59)
1
2
3
4
5
6
7
8
9
+10
0  
 
  
 
 
 
5
Press the   or   button to adjust the hour and then press the
MEMORY/DIMMER button.Press the   or    button once to advance the time by 1 hour. Hold it down to
advance continuously.
6
Press the   or   button to adjust the minutes and then press the
MEMORY/DIMMER button.Press the   or   button once to advance the time by 1 minute. Hold it down
to change the time in 5-minute intervals.
1 Clear all the programmed contents. [Refer to “Factory reset, clearing all memory”
on page 62 for details.]
2 Perform “Setting the clock” from step 1.
 
						

							29
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Basic Operation
Enjoying surround sound (sound mode)
						

							AN-PR1500H_EN.fm 06/3/14
TINSEA127AWZZ
30
AN-PR1500H_EN.fm 06/3/14
AN-PR1500H
TINSEA127AWZZ
Basic Operation
Enjoying surround sound (sound mode) (continued)