Home > Savage Arms > Firearms > Savage Arms Rimfire Autoloader 62/64/954 Instructions Manual

Savage Arms Rimfire Autoloader 62/64/954 Instructions Manual

Add to Favourites
    Download as PDF

    View the Savage Arms Rimfire Autoloader 62/64/954 Instructions Manual for free. All the Savage Arms manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Safe ow n e rship is your re s p o n s i b i l i t y. Please thoroughly read and understand this manual before loading your firearm. Keep firearms and ammunition away fro m c h i l d ren. Lock unloaded firearms and ammunition securely in separate locations. Savage Arms recommends the use of good quality high velocity factory manufactured ammunition.I N S T R U C T I O N M A N UA LAUTOLOADER RIMFIRE: MODEL 62/64/954 w w w. s a va g e a r m s. c o mIMPORTANT! DO NOT ATTEMPT TO LOAD AND SHOOT YOUR RIFLE...
    Page 2 1Congratulations on joining the Savage Arms family of sporting firearms owners. With reasonable care, your firearm should deliver years of reliable service and perform to our “legend of accuracy”. For your convenience, this INSTRUCTION MANUALhas been divided into 5 sections: SECTION 1:10 Commandments of Shooting Safety SECTION 2:Basic Functions SECTION 3:Rings And Bases For Mounting A Scope SECTION 4:Statement Of Limited Warranty SECTION 5:Model 62/64/954 Series (Parts List and Diagram) S E C T I O N...
    Page 3 3 7.ALWAYS WEAR EYE AND EARPROTECTION WHEN SHOOTING All shooters should wear protective shooting glasses and some form of hearing protectors while shooting. Exposure to shooting noise can damage hearing, and adequate vision protection is essential. Wearing eye protection when disassembling and cleaning any gun will also help prevent the possibility of springs, spring tensioned parts, solvents or other agents from contacting your eyes. No target shooter, plinker or hunter should ever be without them....
    Page 4 5.Look and feel to be sure there are no cartridges in the chamber. 6.As shown in FIGURE 5, load the correct caliber cartridges into the removable magazine by pressing downward and to the rear. 7.Insert the removable magazine back into the stock opening, pressing upward until the latch snaps into position and is fully engaged.8.Pull the cocking handle fully to the rear and release it, allowing the handle to “snap” forward. •This will pick up a cartridge and chamber it. The gun is now ready for firing....
    Start reading Savage Arms Rimfire Autoloader 62/64/954 Instructions Manual

    Related Manuals for Savage Arms Rimfire Autoloader 62/64/954 Instructions Manual

    All Savage Arms manuals