Sanyo VPC T850 User Manual

							
EN-20
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
This advanced function simultaneously detects up to 5 human faces regardless of their
position in the scene.
1. Press the   button to [ ].
2. Press the   button until  [ ] icon appears on the LCD monitor.„The white frame is identified as the “top priority” face (main focus frame), and
gray ones around the other faces.
3. Press the shutter button halfway down to lock the focus. „The main focus frame simultaneously turns green.
„ If the “top priority” face is out of focus, all frames will be disappeared from the
screen.
4. Press the shutter button down fully to capture your image.
„Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turned sideways.
Face detection function is on White frame Green frame
Focus lock Out of focus
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-21
Recording Voice Memos
A voice memo can be recorded once for 30 seconds in the still image mode immediately
following a still image capture.
1. Press the   button to [ ].
2. Press the   button, and select the [Function] menu with the f button.
3. Select [Voice Memo] with the  c / d  buttons, and press the   button.
4. Select [On] with the  c / d  buttons, and press the   button.
5. Press the   button to exit from the menu. „An [ ] icon is displayed on the screen.
6. Compose the image, press the shutter button down halfway, then press it down fully.
„[VOICE RECORDING] is displayed on the screen immediately, and the voice
memo recording starts.
7. Press the shutter button one more time during recording, or wait for 30 seconds.
„[VOICE RECORD END] will be displayed and the recording will end.
„ An [ ] icon is displayed with images that have been recorded with a voice
memo.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-22
VIDEO MODE
Recording Video Clips
This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels.
1. Press the
  button to [ ].
2. Compose the image.
3. Press the shutter button.
„The recording of the video clip will start.„Pressing the shutter button one more time will end
the recording of the video clip.
„The recording time depends on the storage size
and the subject of the image to be recorded.
„The zoom function cannot be used during video
recording.
„When recording a video clip, the flash and 10+2 sec. self-timer function cannot be used.„If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in
the  currently selected quality, the video recording will stop. In this case, select a video quality
lower than the current one.
Playing Back Video Clips
You can play back recorded video clips on the camera. You can also play back sound if
recorded with the video.
1. Press the [ ] button.
„The last image appears on the screen.
2. Select the desired video clip with the  e / f  buttons.
3. Press the
  button.„A press of the f / e buttons during playback allows fast forward play / fast reverse play.„To stop video playback, press the  d button.
This stops playback and returns to the start of the video clip.
„To pause video playback, press the  button.
This pauses video playback.
To cancel pause, press the
  button again.
„Video clips cannot be displayed rotated or enlarged.„Windows Media player or QuickTime Player is recommended to play back the video clip on your
computer.
„QuickTime Player is a free media player available at www.apple.com; and compatible with Mac
and Windows computers. 
„For more information about the operation of the media player, refer to its respective help documentation.
f
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-23
PLAYBACK MODE
Playing Back Still Images
You can play back the still images on the LCD monitor.
1. Press the [ ] button.„The last image appears on the screen.
2. The images can be displayed in forward or reverse sequence with the  e / f  buttons.
„ To view the previous image, press the  e
button.
„ To view the next image, press the  f button.
„
Pressing the c button during image playback will
result in a 90-degree clockwise rotation display.
„ Slide the zoom lever to   side enlarges the
image.
„ To return to normal magnification, slide the
zoom lever to   side.
„An [ ] icon is displayed with the video data. Video clips cannot be rotated.„An [ ] icon is displayed with images which have an audio memo recorded.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-24
Thumbnail Display
This function allows you to view 9 thumbnail images on the LCD monitor at the same
time, which can let you quickly search for the image that you want.
1. Press the [ ] button.„The last image appears on the screen.
2. Slide the zoom lever to   side. „
The images are displayed in the thumbnail
display.
3. Press the  c /  d /  e /  f buttons to select the
image to be displayed at regular size.
4. Press the   button.
„The selected image is displayed at its
regular size.
„An [ ], [ ], [ ] icon may be displayed in a thumbnail.
Removing Red-eye
You can use this function to remove the red-eye effect after an image is taken. 
1. Press the [ ] button.
2. Select the image that you want to edit with the
e / f buttons.
3. Press the   button.
4. Select [Fix Red Eyes] with the  c /  d buttons,
and press the   button.
5. Select [Execute] with the  c /  d buttons, and
press the   button.
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm] with the  c / d  buttons, and press the   button. 
„ When this process ends, this replaces the
original image with the corrected image.
66
EE100- 0005
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-25
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded as a memo for captured still
images. The voice memo can be recorded only once.
1. Press the [ ] button.„The last image appears on the screen.
2. Select the image to which you want to attach the voice memo with the  e /  f
buttons.
3. Press the   button.
4. Select [Voice Memo] with the  c / d  buttons, and press the   button.
5. Select [On] with the  c / d  buttons, and press the   button.
6. Press the   button to exit from the menu.
7. Press the shutter button. „[VOICE RECORDING] is displayed on the screen and recording starts.
8. To stop recording a voice memo as it is being recorded, press the shutter button again.
„[VOICE RECORD END] will be displayed and the recording will end. An 
[] icon
is displayed with images that have been recorded with a voice memo.
Playing back voice memo
A press of the shutter button displays [VOICE
PLAYBACK] and plays back the voice memo.
„Voice memo is only available for still images.
xx
EE100- 00011 00- 0 001100- 0001
aShutter:PlayS hutte r:P la yShutter:Play
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-26
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the [] button.2. Select the image that you want to protect with the e / f buttons.3. Press the  button.
4. Select [Protect] with the  c / d  buttons, and press the button.
5. Select [Single] or [All] with the  c /  d buttons, and press
the
  button.
6. Select [Set] with the  c /  d buttons, and press the button.„Protection is applied to the image and the camera
returns to the playback mode.
„The protect icon [] is displayed with protected images.When [All] has been selected, [] is displayed 
with all the images.
Canceling the Protection
To cancel protection for only one image, display the image on which
you want to remove the image protection.
1. Select [Protect] with the  c / d  buttons from the playback
menu, and press the  button.
2. Select [Single] or [All] with the  c /  d buttons, and press
the
  button.
3. Select [Cancel Protect] with the  c / d  buttons, and press
the
  button.„The removal of image protection is executed and the camera
returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the c / d buttons from the playback menu, and press the  button.2. Select [Select] with the  c / d  buttons, and press the  button.„The images are displayed in the thumbnail display.3. Select the image you want to protect with the e / f buttons, and press the d button.„The protect icon [] is displayed with protected  images. One more press of the  d
button will cancel the operation. This procedure is repeated to select multiple images.
4. Press the
  button.
5. Select [Execute] with the  c / d  buttons, and press the  button.„Protection is executed and the ca mera returns to playback mode.
„Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-27
Erasing Images
Erasing single image / Erasing all images
1. Press the [ ] button.2. Select the image you want to erase with the e /f buttons.3. Press the   button.
4. Select [Single] or [All] with the c /  d buttons,
and press the   button.
„ [Single]: Erases the selected image or the
last image.
„ [All]: Erases all of the images except for the
protected images.
„
[Select]: Erases a number of selected images.5. Select [Execute] with the  c /  d buttons, and
press the   button.
„ To not erase, select [Cancel], and press the
 button.
Erasing selected images
This erases a number of selected images.
1. Press the [ ] button.
2. Press the   button.
3. Select [Select] with the  c /  d buttons, and
press the   button.
„ The images are displayed in the thumbnail
display.
4. Select the image you want to erase with the  e /
f  buttons, and press the  d button.
„
The [   ] icon will be displayed. One more
press of the d button will cancel the
operation. Repeat this procedure and select
all the images that you want to erase.
5. Press the   button. 
6. Select [Execute] with the  c /  d buttons, and
press the   button.
„Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
666
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-28
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing still images.
1. Press the   button to [ ].
2.Press the   button, and select the [Capture] / [Function] menu with the e /  f
buttons. 3. Select the desired option item with the  c /  d buttons, and press the   button to
enter its respective menu.
4. Select the desired setting with the  c / d  buttons, and press the   button.
5. To exit from the menu, press the   button.
Scene Mode
Select from 20 different scene modes in accordance with the shooting conditions. 
* Program AE  / Anti Shake / Panorama / Portrait Man / Portrait Lady / Landscape / Sports / 
Night Portrait /  Night Scene / Candlelight / Fire works / Text / Sunset / Sunrise / Splash Water 
/ Flow Water / Snow / Beach / Pets / User Setting
Size
This sets the size of the image that will be captured.
* [ ] 3264 x 2448
* [ ] 2816 x 2112
* [ ] 2272 x 1704
* [ ] 1600 x 1200
* [ ] 640 x 480
Quality
This sets the quality (compression) at which the image is captured.
* [   ] Fine
* [   ] Standard
* [   ] Economy
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-29
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
White Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
* [ Blank ] Auto
* [   ] Incandescent
* [   ] Fluorescent 1
* [   ] Fluorescent 2
* [   ] Daylight
* [   ] Cloudy
* [   ] Manual
Manual WB
This manually sets the white balance and stores it. Use of this is convenient when the white
balance does not offer a good match.
Before selecting [Execute] and before taking your image, place a white paper in the scene and
set the white balance manually.

* Cancel / Execute
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure
is increased), photography will become possible even in dark locations, but the more pixelated
(grainier) the image will appear.
* [Blank] Auto
* [ ] ISO 64
* [ ] ISO 100 
* [ ] ISO 200
* [ ] ISO 400 
* [ ] ISO 800 
* [ ] ISO 1600
Metering
This sets the metering method for calculating the exposure.
Color
This sets the color of the  image that will be captured.
* Normal / Vivid / Sepia / Monochrome / Blue / Red / Green / Yellow / Purple * Center: Averages the light metered from the entire frame, but gives greater weight to the 
subject matter at the center.
* Multi: The entire area of the screen is measured, and the exposure is calculated.
* Spot: A very small portion of the center of the screen is measured to calculate the correct  exposure.
Downloaded From camera-usermanual.com Sanyo Manuals