Sanyo Vpc S4 Instruction Manual

English28
While the image data is being recorded... 
iThe accessing indicator flashes while an image is being recorded and it is 
not possible to take another picture at this time. When the accessing 
indicator stops flashing, the camera is again enabled for shooting.
View the image just captured (preview display) 
iImmediately after capturing an image, 
you can press the SET button to preview 
the image. Press the [l] or [m] arrow 
button to view the previous image or the 
next image. For video clips,...

29English
CAPTURING IMAGES
Setting the shooting mode
Set the camera to the still image or sequential 
shots shooting mode
1 Set the main switch to [ ], and 
turn on the camera (see page 23).
hAn image appears on the LCD 
monitor. If no image appears, 
please see page 84 and follow the 
steps to enable the LCD monitor.
2 Press the MENU button.
hThe Still Image Shooting Setting 
Screen appears.
3 Press the [n] or [o] arrow button 
to select the operation mode 
menu.
: To capture still images (still 
image...

English30
Set the camera to the video clip shooting mode
1 Set the main switch to [ ], and turn on the camera.
hAn image appears on the LCD monitor. If no image appears, please 
see page 84 and follow the steps to enable the LCD monitor.
Capturing still images
1 Set the camera to the still image 
shooting mode (see page 29).
2 Slowly press and hold the shutter 
release button halfway.
hThe target mark   or the focus 
icon   (focus-lock) appears in 
the LCD monitor.
hIf the Shooting Setting Screen 
(see...

31English
CAPTURING IMAGES
NOTE 
About the focus icon and target mark 
iThe target mark outlines the area that the camera is using to focus. If the 
area outlined by the target mark is not the subject you want to focus on, 
then refocus your subject, for example by changing the shooting angle. 
iThe target mark does not appear in the following situations. 
When the subject is not in focus 
When using the self-timer to take a picture (see page 37)
When the focus is set to focus range   or   (see page 53)...

English32
Capturing sequential shots
1 Set the camera to the sequential shots shooting mode (see page 29). 
2 Press the shutter release button to capture the sequential shots. 
hImages are captured as long as the shutter release button is pressed. 
hA maximum of four images are captured.
hDuring shooting,   appears in the LCD monitor. 
3 Finish capturing images. 
hRelease the shutter release button to end recording. 
NOTE 
About the focus during sequential shots shooting
iIn sequential shots shooting,...

33English
CAPTURING IMAGES
Video Clips (no audio)
Your camera can shoot Video clips.
* Video clips can only be shot without sound.
1 Set the camera to the video clip 
shooting mode (see page 30). 
2 Press the shutter release button to 
record the video clip. 
hIt is not necessary to keep the 
shutter release button pressed 
while shooting. 
hDuring recording   appears on 
the LCD monitor. 
hWhen the remaining recording time 
available for the currently recording 
clip becomes little, a countdown of 
the...

English34
OTHER SHOOTING FUNCTIONS 
Using the flash 
The flash is used not only for taking pictures where there is insufficient light, 
but also when the subject is in shade or in backlight conditions. Your camera 
has four modes of operation (automatic flash mode, forced flash mode, flash 
off mode, and red-eye reduction mode). The flash is available only when 
shooting still images. 
1 Set the camera to the still image 
shooting mode (see page 29).
hThe current flash mode is shown 
on the LCD monitor....

35English
OTHER SHOOTING FUNCTIONS
2 Press the flash button [] ([n]) to select the flash mode.
hEach time the flash button is pressed, the flash mode icon changes.
3 Press the shutter release button. 
hThe image is captured in the desired flash mode. 
 
1Press the flash button. 
hThe LCD monitor turns on briefly to show the currently set flash 
mode. 
2Press the flash button within 5 seconds to set the desired flash mode. 
NOTE 
In the automatic flash mode... 
iIn the automatic flash mode using the LCD...

English36
Using the zoom 
There are two zoom functions: optical zoom and digital zoom. 
1 Point the camera lens at the subject. 
2 Press [T] or [W] on the zoom 
switch to compose the desired 
image. 
[T]: Zoom in on the subject. 
[W]: Zoom out. 
hWhen the zoom switch is 
pressed, the zoom bar appears 
on the LCD monitor. 
hWhen the optical zoom factor is 
at maximum, zooming stops 
temporarily. When [T] on the 
zoom switch is pressed again, 
the mode changes to the digital 
zoom mode and zooming...

37English
OTHER SHOOTING FUNCTIONS
SELF-TIMER 
The self-timer can be used to take photos in the still image shooting mode 
and sequential shots shooting mode. 
1 Set the camera to the still image or sequential shots shooting mode, 
press the MENU button and select the self-timer menu.
2 Press the [n] or [o] button to select 
the self-timer menu.
3 Select desired icon, and press the SET button.
hThis completes the self-timer setting.
4 Press the shutter release button. : Turns off the self-timer...