Sanyo Vpc J4 Instruction Manual

English148
4 Specify the number of prints. 
1Select “COPIES”, and press the
SET button. 
2Press the [n] or [o] arrow button to
set the number of prints.
3Press the SET button. 
h“PRINT” is selected.
5 Press the SET button. 
hPrinting begins. 
NOTE 
To cancel printing 
1During printing, press the [o] arrow button.
hThe Confirm Cancel Printing Screen appears. 
2Select “YES”, and press the SET button. 
hIf “NO” is selected, printing resumes. 
ONE IMAGE
COPIES 1
PRINT
EXIT
Downloaded From...

149English
DIRECT-PRINT (PictBridge PRINT)
To print all the images (print all)
Print all of the images on the card. 
1 Complete the print preparations (see page 145). 
2 Select the all images print icon  ,
and press the SET button. 
hThe Print All Images Screen
appears. 
3 Select “PRINT”, and press the SET button.
hPrinting begins. 
NOTE
Printing is not possible if there are more than 1,000 still images in the
card.
iDelete unwanted images before printing. 
ALL IMAGES
PRINT
EXIT
Downloaded From...

English150
Thumbnail prints (index print)
1 Complete the print preparations (see page 145). 
2 Select the index print icon  , and
press the SET button. 
hThe Index Print Screen appears.
3 Select “PRINT”, and press the SET
button.
hPrinting begins.
INDEX
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 

151English
DIRECT-PRINT (PictBridge PRINT)
To print the images that are set to print (print reserved images)
1 Make the print settings (see page 103), and complete the print prep-
arations (see page 145).
2 Select the print reserved images
icon  , and press the SET button.
hThe Confirm Print Images Screen
appears.
3 Select “PRINT”, and press the SET button.
hPrinting begins.
hPrinting begins about 1 minute after the SET button is pressed.
HINT
iIn step 2, if you press the [l] or [m] arrow button, you can...

English152
To change the print settings and print images (change print settings)
Images are printed according to settings specified by the digital camera, such
as paper type, size, layout, printing quality, etc.
1 Complete the print preparations (see page 145).
2 Select the change print settings
icon  , and press the SET button.
hThe Printer Settings Screen
appears. 
MEDIA
TYPE:Specify the type of
paper used for printing.
PAPER SIZE:Specify the size of
paper used for printing.
LAYOUT:Specify how the...

153English
DIRECT-PRINT (PictBridge PRINT)
3 Adjust the printer settings.
1Press the [n] or [o] arrow button to select the printer setting parame-
ter, and press the SET button.
hThe screen to set the selected parameter appears.
2Press the [n] or [o] arrow button to adjust the setting, and press the
SET button.
hThe selected parameter is set, and you are returned to the Printer
Settings Screen.
hFollow the same procedure to adjust the other parameters, as
desired.
hThe contents of the settings that can...

English154
CONNECTING TO A TV 
By connecting the digital camera to a television set, you can view the LCD
monitor display on the TV screen. 
Connections Connect the supplied AV cable from the DIGITAL/AV terminal on the digital
camera to the AUDIO and VIDEO input terminals on the TV. 
Playback iAfter connecting the digital camera to the television, set the TV input switch
to VIDEO input.
iWhen an AV cable is connected, no image appears on the camera’s LCD
monitor. 
iThe playback method is the same as when...

155English
APPENDICES 
COMMONLY ASKED QUESTIONS 
If you have a question about the camera operation, you might find the answer
in this compilation of commonly asked questions.
Question Answer Action
PowerWhy doesn’t the 
power turn on?Due to cold 
temperatures, the 
battery pack 
temporarily lost its 
power.Place the digital 
camera in your 
pocket to warm it 
up before using it.
Why is the battery 
pack consumed 
so quickly even 
after it was fully 
recharged?The ambient 
temperature is 
ver y low.Keep...

English156
Question Answer Action
ShootingWhile the flash is 
recharging, why 
does the LCD 
monitor suddenly 
turn off?Battery pack 
power is low, 
activating the 
function that 
momentarily turns 
off the LCD 
monitor.Not a malfunction. 
When the flash is 
fully charged, the 
LCD monitor will 
turn on again.
Why isn’t the 
image captured 
when the shutter 
release button is 
pressed?The accessing 
indicator is lit 
orange (data is 
being recorded).Wait until the 
accessing 
indicator lights 
green to...

157English
COMMONLY ASKED QUESTIONS 
Question Answer Action
ShootingDuring macro 
photography, why 
is the captured 
image displaced 
from the image as 
seen through the 
viewfinder?Due to the 
displacement 
between the 
camera lens and 
the viewfinder, a 
subject viewed 
close up through 
the viewfinder will 
appear lower in 
the captured 
image.Compose the 
photo while 
viewing the LCD 
monitor.
Why can only the 
 ISO 
sensitivity setting 
be selected?The ISO 
sensitivity setting 
is fixed at   in 
the...