Sanyo VPC E60EX User Manual

35English
CAPTURING AND PLAYING BACK STILL IMAGES
Viewing still images
The steps for viewing both single shots and sequential shots are the same.
5 Press the playback button [H].
hThe image most recently 
captured appears on the LCD 
monitor.
6 View other images.
hToggle the SET button to the 
left or right to display the 
previous or next image.
To display the previous 
image: Toggle the SET button 
to the left.
To display the next image: 
Toggle the SET button to the 
right.
hTo return to Shooting...

English36
9-image/36-image display playback
1 Press the playback button 
[H].
2 Press [W] ([P]) on the zoom 
switch.
hThe 9-image display 
appears.
hWhen [W] on the zoom 
switch is pressed again, the 
36-image display appears. To 
return to the 9-image display, 
press [T] ([]]) on the zoom 
switch.
3 Select the image to play back.
hToggle the SET button up, 
down, left or right to move 
the orange frame to the 
desired image, and press the 
SET button.
hWhen the 9-image display is 
shown, instead of...

37English
CAPTURING AND PLAYING BACK STILL IMAGES
Magnifying (zooming in) the image
1 Display the image that you want to magnify.
2 Press [T] ([]]) on the zoom 
switch.
hMagnification is enabled.
hThe image is magnified, and the 
central portion of image is 
displayed.
hToggle the SET button to view 
different parts of the magnified 
image.
To magnify:
Magnification increases with each 
press of [T] ([]]) on the zoom 
switch.
To return to normal size:
Magnification decreases with each 
press of [W] ([P])...

English38
Zoom jump playback
You can magnify a portion of a still image to check the accuracy of the focus.
1 Display a still image to view using 
zoom jump playback.
2 Press the SET button.
hThe image is magnified.
hIf the magnified view appears to 
be in focus, then the overall 
image will be in focus.
3 Toggle the SET button up, down, 
left and right to move to the part 
you wish to magnify, and press [T] 
([]]) on the zoom switch.
hThe displayed area is further 
magnified.
To magnify further:...

39English
VIDEO CLIP RECORDING AND PLAYBACK
Recording a video clip
1 Press the ON/OFF button to 
turn the camera on.
2 Press the MENU button.
hThe Mode Select Screen 
appears.
3 Toggle the SET button to the 
right to select “MOVIE”, and 
press the MENU button.
hThe Video Clip Recording 
Screen appears.
4 Press the shutter button.
hVideo clip recording begins. 
During recording, the 
recording time is shown on 
the LCD monitor.
hIt is not necessary to 
continue pressing the shutter 
button while...

English40
Playing back the video clip
6 Press the playback button 
[H].
hThe video clip just recorded 
appears on the LCD monitor.
hVideo clips are indicated by 
a video clip pattern along the 
top and bottom of the 
screen.
7 Press the SET button.
hVideo clip playback begins.
SET button Playback button [H]
Video clip pattern
Downloaded From camera-usermanual.com Sanyo Manuals 

41English
VIDEO CLIP RECORDING AND PLAYBACK
Outline of playback operation
When you are finished viewing video clips...
iPress the ON/OFF button to turn the camera off.
To do this...Do this
Stop playback During playback, toggle the SET button down.
PauseDuring playback, press the SET button or 
toggle the SET button up.
During accelerate playback, toggle the SET 
button up.
To play back 
one image 
at a time 
(single-
frame step)During forward 
playbackAfter pausing playback, toggle the SET button 
to the...

English42
HINT
Adjusting the LCD monitor brightness
iWhile the Shooting Screen is active, you can quickly access the screen for 
adjusting the brightness of the LCD monitor by pressing the MENU button 
for at least 1 second.
Display the video clip playback point
iDuring video clip playback, press the MENU button for at least 1 second to 
display a bar showing the current playback point in the video clip.
iPress the MENU button for about 1 second to cancel the bar.
CAUTION
If no audio is heard...
iThe...

43English
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled, and whether or 
not the optical zoom during video clip recording is enabled (page 127).
1 Point the camera lens at the 
subject.
2 Press [T] or [W] on the zoom 
switch to compose the desired 
image.
[T]: Zoom in on the subject.
[W]: Zoom out.
hWhen the zoom switch is 
pressed, the zoom bar appears 
on the LCD monitor.
hWhen the optical zoom factor is at...

English44
FLASH SETTING
The flash is used not only for taking pictures where there is insufficient light, 
but also when the subject is in shade or in backlight conditions. Your camera’s 
flash has four modes of operation (automatic flash mode, forced flash mode, 
flash off mode, and red-eye reduction mode). Select the flash mode that is 
appropriate for the surrounding conditions. The flash can be enabled only 
when taking single-shot still images.
1 Display the Still Image Shooting 
Screen (page 33).
2...