Sanyo Vpc E60ex Instruction Manual

75English
SHUTTER OPERATION SETTING
Select how the camera operates when the shutter button is pressed.
1 Set the camera to the still image shooting mode, and display PAGE 
1 of the Shooting Setting Screen (page 55).
2 Select the operation mode menu.
3 Select the desired icon, and press the SET button.
hThe selected shutter operation is set. c: When the shutter button is 
pressed, a single still image is 
captured (single shot).
%: A single still image is captured 
with an accompanying audio 
recording...

English76
Shooting sequential shots
When the shutter button is pressed, three still images are captured in 
succession.
1 Select the sequential shots icon P 
from the operation mode menu, and 
press the SET button.
hIf the resolution is set to k, the 
setting changes automatically to 
y and the images are captured.
2 Press the shutter button to start 
shooting.
hSequential shots shooting begins. 
Up to three still images can be 
captured, but if the shutter button is 
released during shooting, shooting...

77English
SHUTTER OPERATION SETTING
Making a calendar shot
You can enter a captured still image in the calendar.
1 Select the calendar photo icon & from the operation mode menu, 
and press the SET button.
2 Press the SET button again.
hThe calendar appears on the LCD 
monitor.
3 Toggle the SET button left, right, up 
and down to move the orange frame 
to the date you wish to save the 
image to.
4 Press the SET button.
hThe Shooting Screen appears.
5 Compose the subject, and press the 
shutter button to...

English78
Composite photo
Shoot two separate still images, and combine them to create a composite still 
image.
1 Select the composite icon - from the operation mode menu, and 
press the SET button.
2 Press the SET button again.
hThe frame selection display appears.
3 Toggle the SET button left or right to 
select a composite pattern, and 
press the SET button.
hThe select frame shape fills the 
display.
4 Capture the image for the 
background (frame).
hPoint the lens at the background 
subject, and snap...

79English
SHUTTER OPERATION SETTING
ID photos
You can create ID photos to use in circulars, ads, and other publications, as 
well as in identification documents.
1 Select the ID photo icon . from the operation mode menu, and 
press the SET button.
2 Press the MENU button twice.
hThe ID photo outline appears on 
the LCD display.
3 Align the subject with the ID photo 
outline, and snap the picture.
hAfter the preview screen for the 
captured image appears, you are 
returned to the Shooting Setting...

English80
FLICKER-REDUCTION SETTING
The flicker-reduction setting reduces the flicker phenomenon that results 
when filming video clips under fluorescent lights and the like where the 
background lighting pulsates at the frequency of the power supply. The flicker-
reduction setting is set for a frequency of 50 Hz. 
1 Set the camera to the video clip recording mode, and display PAGE 
1 of the Shooting Setting Screen (page 55). 
2 Select the flicker-reduction menu.
hThe flicker-reduction menu 
appears. 
3...

81English
FOCUS AREA SETTING
You can choose from the following 2 types of autofocus (still image shooting 
only):
9-point range finder focus: The correct focus is determined from 9 different 
focus points within the shooting area visible on the 
LCD monitor. When the image is focused, a target 
mark & appears.
Spot focus: The camera focuses on the subject in the center 
of the LCD monitor.
1 Display PAGE 2 of the Shooting Setting Screen (page 55). 
2 Select the focus mode menu. 
hThe focus mode menu...

English82
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes. 
Multi-section light-measuring:
The exposure is adjusted after sampling from multiple areas of the entire 
shooting screen.
Center-weighted light-measuring:
The exposure is adjusted after light is measured from the entire image, but 
with emphasis on the center area.
Spot light-measuring:
You can compose the picture and capture the image after first measuring the 
light only at the center spot of the LCD monitor....

83English
ISO SENSITIVITY
With the initial settings, the ISO sensitivity is automatically set according to 
the brightness of the subject. However, the ISO sensitivity can be set to a 
fixed setting.
1 Display PAGE 2 of the Shooting Setting Screen (page 55).
2 Select the ISO sensitivity menu.
hThe ISO sensitivity menu appears.
3 Select the desired icon, and press the SET button.
hThe ISO sensitivity is set.
HINT
iBy setting a higher ISO sensitivity, you can set higher shutter speeds and 
capture images...

English84
WHITE BALANCE
This camera automatically adjusts the white balance under most lighting 
conditions. However, if you want to specify the lighting conditions or change 
the overall tone of the image, the white balance can be manually set.
1 Display PAGE 2 of the Shooting Setting Screen (page 55).
2 Select the white balance menu.
hThe white balance menu appears.
>: The camera will make the white 
balance adjustment automatically 
based on the natural and artificial 
light conditions. This is the...