Sanyo Vpc E60ex Instruction Manual

135English
FILE No. RESET FUNCTION
iIf Card B already has image data in it when it replaces Card A, file names 
are assigned as follows.
When the highest image number on Card B (before replacing) is 
lower than the highest image number on Card A: the file name of the 
next recorded image continues from last file name recorded on Card A.
When the highest image number on Card B (before replacing) is 
higher than the highest image number on Card A: the file name of the 
next recorded image continues from...

English136
1 Display the Option Screen (page 118).
2 Select the file number reset icon 
i.
3 Press the SET button.
hThe File Number Reset Screen 
appears.
ON:
The file number reset function is “ON”.OFF:
The file number reset function is 
“OFF”.
4 Select “OFF”, and press the SET button.
hThe file number reset function was set to OFF.
HINT
iUntil the file number reset function is turned “ON”, consecutive file names 
are assigned. It is recommended that the file number reset function be 
returned to “ON” at...

137English
INITIALIZING THE CARD MEMORY AND INTERNAL MEMORY
A card must be formatted with this camera:
iAfter purchasing, when used for the first time, or
iIf it was formatted using a personal computer or another digital camera.
The card cannot be reformatted if the lock switch is set to the “LOCK” 
position. Proceed with the reformat procedure after setting the lock switch to 
the unlocked position.
1 To reformat a card, install it in the camera. To reformat the camera’s 
internal memory, remove the...

English138
4 Select the desired format option, and press the SET button.
hThe Confirm Format Screen appears.
5 Select “YES”.
6 Press the SET button.
hFormatting begins.
hDuring formatting, “FORMATTING” and “DO NOT POWER OFF” are 
shown on the LCD monitor.
CAUTION
Caution during reformatting
iPlease do not turn off the camera or insert/remove the card while the card 
is being formatted.
Reformatting erases the data
iWhen the card or internal memory is initialized, all the recorded data is 
erased....

139English
RESETTING THE CAMERA SETTINGS
Reset the camera to the factory-preset settings.
1 Display the Option Screen (page 118).
2 Select the reset settings icon 2, 
and press the SET button.
hThe Reset Settings Screen 
appears.
YES:
Reset to the factory-preset settings.
NO:
Do not change the settings, and 
return to the Option Screen.
3 Select “YES”, and press the SET button.
hThe camera settings are reset to the factory-preset settings.
HINT
iNote that the following settings do not change with this...

English140
CHECKING THE REMAINING INTERNAL 
MEMORY AND CARD MEMORY
You can check how many images can be captured and how much recording 
time is available on the card. For a table showing the maximum number of 
images and recording time for the internal memory and for a specific card, 
please see “Possible No. of Images/Possible Shooting Time/Possible 
Recording Time” on page 174.
Checking the remaining number of images and video recording time
1 Press the ON/OFF button to turn the 
camera on, and press...

141English
CHECKING THE REMAINING INTERNAL MEMORY AND CARD MEMORY
For audio data
1 Set the camera to the audio 
recording mode (page 67).
hThe remaining audio recording 
time is shown.
HINT
iWhen the remaining number of images or the remaining video recording 
time is “0”, you cannot capture any more images. To capture more images, 
either install a new card, or save the images to a computer and then erase 
them (page 93) from the card.
iWhen the remaining number of images or the remaining video...

English142
CHECKING THE REMAINING BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be 
checked on the LCD monitor. Make sure to check this indicator before 
capturing an image. For an indication of the possible length of time for battery
pack operation, see page 173.
1 Display a Shooting or Playback 
Setting Screen (pages 55 and 87).
hThe battery pack remaining charge 
indicator appears in the lower right 
corner of the LCD monitor.
hDue to the battery pack...

143English
CHECKING THE REMAINING BATTERY PACK CHARGE
HINT
iIf any data is present, you can also check the remaining battery pack 
charge on the Information Screen (page 117).
iBattery life may differ even among battery packs of the same type.
iDepending on the usage of the camera (such as the number of times the 
flash is used, the use of the LCD monitor, etc.) or the ambient temperature 
(temperatures below 10°C [50°F]) the number of images that can be saved 
on a fully charged battery pack will vary...

English144
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV 
Connect the supplied AV interface cable from the USB/AV terminal on the 
digital camera to the AUDIO and VIDEO input terminals on the TV. 
Playback iAfter connecting the digital camera to the television, set the TV input switch 
to VIDEO input.
iWhen an AV interface cable is connected, no image appears on the 
camera’s LCD monitor. 
iThe playback method is the same as when viewing images on the 
camera’s LCD monitor.
iThe same playback...