Sanyo 4 Head Vcr Manual

31
To record a broadcast at a specific time
and date
, repeatedly press PLAY or STOP
to select the specific date.
Press 
FA S T -F to store your selection.
9. Repeatedly press 
PLAY or STOP to select
the start hour. When the correct hour
appears, press 
FA S T - F. Then repeatedly
press 
PLAY or STOP to select the minute
and press 
FA S T -F.
10. Repeat Step 9 to set the end time.
11. Repeatedly press 
PLAY or STOP to select
the channel. 
To record from a source connected to the
AUDIO IN 1/VIDEO IN 1 (or...

32
2. Turn on the VCR and repeatedly press TV/
VCR
 until VCR appears.
3. Press 
PR OG. The first four timer settings
appear.
4. Repeatedly press 
PLAY or STOP to select
the setting you want to change, then press
FA S T- F. 
5. Follow Steps 8–12 under “Setting a Timer”
on Page 30 to correct the selected setting.
6. When you finish, press 
PROG again, then
turn off the VCR.
Clearing a Timer
If the timer recording has not yet started:
1. Follow Steps 1–3 under “Checking/Chang-
ing Timers.”
2. Highlight the...

33
AUDIO-ONLY RECORDING 
(MODEL 62 ONLY)
Because of the superior quality of VHS Hi-Fi
audio recordings, you might want to use your
VCR as an audio-only recorder. You can also
make live recordings by connecting a pre-
amplifier or mixer to the VCR’s 
AUDIO IN jacks.
Simply select the line input and record as usu-
al.
Caution:
 Do not directly connect a microphone
to the VCR.
Note:
 For the best audio fidelity, we recom-
mend you use high-quality video tape (such as
Cat. No. 44-410) to make audio-only...

34
ADDITIONAL INFORMATION
TROUBLESHOOTING
If you follow the instructions in this manual and still have trouble operating your VCR, look in this
chart for the problem description and its solution. If your VCR still does not work properly, contact
your local RadioShack store.
PROBLEM POSSIBLE SOLUTION
No power. The power cord is not connected. Plug the power cord into an AC
outlet.
Timer recording did not work, 
or a broadcast was recorded 
at the wrong time.• The power is on. Turn off the power.
• The...

35
PROBLEM POSSIBLE SOLUTION
No stereo sound for a stereo 
recording (Model 62 only).• You have not connected the VCR’s AUDIO OUT jacks to a ste-
reo system or stereo TV. Connect the jacks to a stereo output.
• The audio out setting is not correctly set. Set it to 
Hi-Fi (see
“Receiving/Recording Stereo/SAP Broadcasts (Model 62
Only)” on Page 28).
• The VCR might not have adjusted the tracking correctly. You
might need to manually adjust the tracking (see “Tracking” on
Page 26).
16-549.fm  Page 35...

36
CARE AND MAINTENANCE
Your Optimus 4-Head VHS HQ VCR is an example of superior design and craftsmanship. The fol-
lowing suggestions will help you care for your VCR so you can enjoy it for years.
Keep the VCR dry. If it gets wet, wipe it dry immediately. Liquids might contain min-
erals that can corrode the electronic circuits.
Use and store the VCR only in normal temperature environments. Temperature ex-
tremes can shorten the life of electronic devices and distort or melt plastic parts.
Keep the VCR...

37
Servicing Your VCR 
There are no user-serviceable parts inside your
VCR. If you encounter a problem that you can-
not correct using this manual and its trouble-
shooting guide, take the VCR to your local
RadioShack store for assistance.
Cleaning the Video Heads
When video head cleaning becomes neces-
sary, the VCR displays the following message
on the TV screen while playing back a record-
ed tape.
Video head cleaning kits are available from
your local RadioShack store. Clean the heads
only when the...

38
SPECIFICATIONS 
Television System  ..............................................................................  NTSC Standard Color Signal
Recording System ................................................................................  Four-Head Double Azimuth
Tape Width  ............................................................................................................................  
1/2 Inch
Tape Speed:
SP...

39
Frequency Response:
Regular Audio
SP  .................................................................................................................  80 Hz–10 kHz
EP  ...................................................................................................................  80 Hz–5 kHz
Hi-Fi Audio (Model 62 only) In All Modes ............................................................  20 Hz–20 kHz
Power Requirement...

RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
5A7Printed in Japan
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS...