Samsung Wb 2200 F Manual

Wireless network  120
Accessing a sharing service
1 Rotate the mode dial to .
2 Select .
3 Select a sharing service.
•	If the pop-up message that prompts you to create an account appears, select 
OK.
4 Connect to a WLAN. (p. 108)
5 Enter your ID and password to log in.
•	For information about entering text, refer to "Entering text". (p. 111)
•	To select an ID from the list, select  →  an ID.
•	If you have previously logged in to the sharing service, you may be logged in 
automatically.
You must...

Using photo or video sharing services 
Wireless network  121
•	You can set an upload folder for Facebook by pressing [m], and then selecting Upload Folder (Facebook) on the sharing service's list screen.
•	You cannot upload files if the file size exceeds the limit. The maximum resolution of photos you can upload is 2M. The maximum resolution of videos you can upload is . If the 
selected photo has a resolution higher than 2M, it will be automatically resized to a lower resolution. (On some sharing...

Wireless network  122
Viewing photos or videos on devices that support Samsung 
Link
1 Rotate the mode dial to .
2 Select  →  Nearby devices.
•	If the guide message appears, select OK.
•	The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device. 
•	If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p. 108)
•	You can set to allow only selected devices or all devices to connect by 
pressing [
m], and then...

Using Samsung Link to send files
Wireless network  123
•	You can share up to 1,000 recent files.
•	On a Samsung Link device, you can view only photos or videos captured with your camera.
•	The range of the wireless connection between your camera and a Samsung Link device may vary depending on the specifications of the AP.
•	If the camera is connected to 2 Samsung Link devices, playback may be slower.
•	Photos or videos will be shared in their original sizes.
•	You can use this feature only with devices...

Settings menu  ………………………………………  125
Accessing the settings menu  ……………………  125
Sounds  ……………………………………………  126
Display  ……………………………………………  126
Connectivity  ………………………………………  127
General  ……………………………………………  128
Settings
Refer to options to configure your camera’s settings.   

Settings  125
3 Select an item.
BackSelectMedium
On
Sound 1 OffOn
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Sounds
4 Select an option.
Back
Set
Off
Low
Medium
High
Volume
5 Press [r] to return to the previous screen.
Accessing the settings menu
1 Rotate the mode dial to .
2 Select a menu.
Settings
Sounds
Display
Connectivity
General
Icon Description
Sounds: Set various camera sounds and the volume. (p. 126)
Display: Customize the display settings. (p. 126)
Connectivity: Set the connection...

Settings menu
Settings  126
Display
* Default
ItemDescription
Start Image
Set a start image to display when the camera turns on.
•	Off *: Display no start image.
•	Logo : Display a default image stored in the internal memory.
•	User Image: Select User Image from the photos you captured 
in the memory.
•	The camera will save only one User Image in the internal 
memory at a time.
•	If you select a new photo as a User Image or reset your 
camera, the camera will delete the current image.
Guide LineSelect a...

Settings menu
Settings  127
Connectivity
* Default
ItemDescription
Video Out
Set the video signal output for your region.
•	NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
•	PA L  (supports only BDGHI): Australia, Austria, Belgium, China, 
Denmark, England, Finland, France, Germany, Italy, Kuwait, 
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, 
Sweden, Switzerland, Thailand, etc
Anynet+ 
(HDMI-CEC)
Turn on to control the camera with a TV remote control when 
you connect it to an HDTV...

Settings menu
Settings  128
* Default
ItemDescription
File No.
Specify how to name files.
•	Reset: Set the file number to start from 0001 when you 
insert a new memory card, format a memory card, or 
delete all files.
•	Series*: Set the file number to resume from the 
previous file number when you insert a new memory 
card, format a memory card, or delete all files.
•	The default name of the first folder is 100PHOTO and 
the default name of the first file is SAM_0001.
•	The file number increases by one,...

Settings menu
Settings  129
* Default
ItemDescription
Live view NFC
Set a Wi-Fi function to launch by reading a tag from an 
NFC-enabled device in Shooting mode.
( AutoShare,  Remote Viewfinder*)
AF LampSet a light to automatically turn on in dark places to help 
you focus. (Off , On *)
Format
Format the internal memory and the memory card. 
Formatting will delete all files, including protected files. 
(Ye s , No *)
Errors can occur if you use a memory card formatted by 
another brand of camera, a memory...