Samsung UE 55C8000 User Manual

							21English
03Basic	FeaturesPicture	Reset	(OK	/	Ca\fce\b)
Resets your current picture mode to its de\faul\yt settings\b
	
¦ Setti\fg	up	the	TV	with	Your	PC
Set the input source to PC\b
Auto	Adjustme\ft	t
Adjust \frequency values/posi\ytions and fine tune \ythe settings 
automatically\b 
 
✎Not available when connecting with an HDMI/DVI cable\b
Scree\f
 
■ Coarse	/	Fi\fe: Removes or reduces picture noise\b I\f the 
noise is not removed by Fine-tuni\yng alone, then adju\yst 
the \frequency as best as \ypossible (Coarse) and Fine-
tune again\b A\fter t\yhe noise has been \yreduced, readjust 
the picture so that it is al\yigned to the centre o\f screen\b
 
■ Positio\f: Adjust the PC scr\yeen position with \ydirection 
button (▲ / ▼ / ◄ / ►)\b
 
■ Image	Reset: Resets the image\y to de\fault setting\ys\b
Usi\fg	Your	TV	as	a	Computer	(PC)	Disp\bay
Setting Up Your PC So\ftware (Based on Windows XP) 
Depending on the ve\yrsion o\f Windows and the video\y card, 
the actual screens on your PC may\y di\f\fer in which case t\yhe 
same basic set-up \yin\formation will al\ymost always be appl\yied\b 
(I\f not, contact yo\yur computer manu\fac\yturer or Samsung 
Dealer\b)
1.	 Click on “Control Panel” on the W\yindows start menu\b
2.	 Click on “Appearan\yce and Themes” in t\yhe “Control 
Panel” window and a\y display dialog-box \ywill appear\b
3.	 Click on “Display” \yand a display dialog\y box will appear\b
4.	 Navigate to the “Se\yttings” tab on the\y display dialog-box\b\y
 
y The correct size setting (\yresolution) [Optimu\ym: 1920 X 
1080 pixels]
 
y I\f a vertical-\frequency option exis\yts on your display 
settings dialog box\y, the correct value is “60” \yor “60 Hz”\b 
Otherwise, just cl\yick “OK” and exit t\yhe dialog box\b
Soun\b Menu
	
¦ Cha\fgi\fg	the	Preset	Sou\fd	Mode
SRS	TheaterSou\fd	t	
 
■ Sta\fdard: Selects the norma\yl sound mode\b
 
■ Music: Emphasizes music \yover voices\b
 
■ Movie: Provides the best sou\ynd \for movies\b
 
■ C\bear	Voice: Emphasizes voices\y over other sounds\b\y
 
■ Amp\bify: Increase the intensity \yo\f high-\frequency sound 
to allow a better \ylistening experien\yce \for the hearing \y
impaired\b
	
¦ Adjusti\fg	Sou\fd	Setti\fgs
Equa\bizer
Adjusts the sound m\yode (standard sound mode only)\b 
 
■ Ba\ba\fce	L/R: Adjusts the balan\yce between the rig\yht and 
le\ft speaker\b
 
■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth 
Adjustment): Adjust\ys the level o\f spec\yific bandwidth 
\frequencies\b
 
■ Reset: Resets the equal\yizer to its de\fault\y settings\b
	
¦ Sou\fd	Systems,	Etc.
SRS	TruSurrou\fd	HD	(Off	/	O\f)	t
(standard sound mode only) 
This \function provides a virtual 5\b\y1 channel surround sound 
experience through a pair o\f spea\ykers using HRTF (Head 
Related Trans\fer Function) t\yechnology\b
SRS	TruDia\bog	(Off	/	O\f)	
(standard sound mode only) 
This \function allow\ys you to increase the intensity \yo\f a voice 
over background music or sound\y e\f\fects so that dialo\yg can 
be heard more clearly\b
[UC8000]BN68-02697D-Eng.indb   212010-04-02   오후 7:54:59 
						

							22English
Basic Features
Audio	La\fguage	
(digital channels o\ynly) 
Change the de\fault \yvalue \for audio lan\yguages\b 
 
✎The available language may di\f\fer depending on the 
broadcast\b
Audio	Format	
(digital channels o\ynly) 
When sound is emitt\yed \from both the main s\ypeaker and the 
audio receiver, a sound echo may \yoccur due to the de\ycoding 
speed di\f\ference between the m\yain speaker and the\y audio 
receiver\b In this case, use\y the TV Speaker \fun\yction\b
 
✎Audio	Format option may di\f\fer depending on the 
broadcast\b 5\b1ch Dolby digital sound is only available 
when connecting an external speaker through an 
optical cable\b 
Audio	Descriptio\f	
(not available in \yall locations) (dig\yital 
channels only) 
This \function handl\yes the Audio Stream 
\for the AD	(Audio Description)\y which is 
sent along with th\ye Main audio \from the 
broadcaster\b 
 
■ Audio	Descriptio\f	(Off	/	O\f): Turn 
the audio descripti\yon \function on or 
o\f\f\b
 
■ Vo\bume: Adjust the audio \ydescription volume\b\y
Auto	Vo\bume	(Off	/	Norma\b	/	Night)
To equalize the vol\yume level on each \ychannel, set to Norma\b\b
 
■ Night: This mode provides an improved sound 
experience compared to Norma\b mode, making almos\yt 
no noise\b It is use\y\ful at night\b
Speaker	Se\bect	(Exter\fa\b	Speaker	/	TV	
Speaker)
A sound echo may oc\ycur due to a di\f\ference in decoding 
speed between the m\yain speaker and the\y audio receiver\b In 
this case, set the\y TV to Exter\fa\b	Speaker\b
 
✎When Speaker	Se\bect is set to Exter\fa\b	Speaker , the 
volume and MUTE buttons will not operate and the 
sound settings will be limited\b 
 
✎When Speaker	Se\bect is set to Exter\fa\b	Speaker \b
 
xT V	Speaker : Off, Exter\fa\b	Speaker : O\f
 
✎When Speaker	Se\bect is set to T V	Speaker \b
 
xT V	Speaker : O\f, Exter\fa\b	Speaker : O\f
 
✎I\f there is no video signal, both speakers will be mute\b
Additio\fa\b	Setti\fg
(digital channels o\ynly)
 
■ DTV	Audio	Leve\b	(MPEG	/	HE-AAC): This \function 
allows you to reduce the disparity \yo\f a voice signal 
(which is one o\f th\ye signals received during a dig\yital TV 
broadcast) to a desir\yed level\b
 
✎According to the type o\f broadcast signal, MPEG 
/ HE-A AC can be adjusted between -10dB and 
0dB\b 
 
✎To increase or decrease the volume, adjust 
between the range 0 and -10 respectively\b
 
■ SPDIF	Output: SPDIF (Sony Philip\ys Digital InterFac\ye) 
is used to provide digital sound,\y reducing inter\ference 
going to speakers \yand various digital\y devices such as a \y
DVD player\b
Audio	Format: During the reception o\f a digit\yal TV 
broadcast, you can se\ylect the Digital A\yudio output 
(SPDIF) \format \from the options PCM or Do\bby	Digita\b\b
Audio	De\bay: Correct audio-video sync\y problems, when 
watching TV or vide\yo, and when listeni\yng to digital audio\y 
output using an ex\yternal device such as \yan AV receiver 
(0ms ~ 250ms)\b
 
■ Do\bby	 Digita\b	 Comp	(Li\fe	/	RF): This \function minimizes 
signal disparity be\ytween a dolby digita\yl signal and a 
voice signal (i\be\b \yMPEG Audio, HE-AAC, \yATV Sound)\b
 
✎Select Li\fe to obtain dynamic sound, and RF 
to reduce the di\f\ference between loud and so\ft 
sounds at night time\b
Li\fe: Set the output le\yvel \for signals greater or less than\y 
-31dB (re\ference) to either -2\y0dB or -31dB\b
RF: Set the output le\yvel \for signals greater or less than\y 
-20dB (re\ference) to either -1\y0dB or -20dB\b
Sou\fd	Reset	(OK	/	Ca\fce\b)
Reset all sound set\ytings to the \factor\yy de\faults\b
	
¦ Se\becti\fg	the	Sou\fd	Mode	t
When you set to Dua\b f-g, the current sound mode is 
displayed on the scr\yeen\b
Audio  Type Dua\b	1/2
De\fault
A2 
Stereo Mono
Mo\fo
Automatic 
change
Stereo Stereo ↔ Mo\fo
Dual Dua\b 
f ↔ Dua\b gDua\b	f
NICAM
Stereo Mono
Mo\fo
Automatic 
change
Stereo Mo\fo ↔ Stereo
Dual Mo\fo ↔ Dua\b 
f
 Dua\b g Dua\b	f
AD
[UC8000]BN68-02697D-Eng.indb   222010-04-02   오후 7:55:00 
						

							23English
03Basic	Features 
✎I\f the stereo signal is weak and an automatic switching, 
occurs, then switch to the mono\b
 
✎Only activated in stereo sound signal\b
 
✎Only available when the I\fput source is set to T V \b
Setup Menu
	
¦ Setti\fg	the	Time
Time	
 
■ C\bock: Setting the clock\y is \for using vario\yus timer 
\features o\f the TV\b
 
OThe current time will appe\yar every time you p\yress 
the INFO button\b
 
✎I\f you disconnect the power cord, you have to set 
the clock again\b
C\bock	Mode	(Auto	/	Ma\fua\b)
 
✎Depending on the broadcast station and signal, 
the auto time set up may not be correct\b In this 
case, set the time manually\b
 
✎The antenna must be connected in order to set 
the time automatically\b
C\bock	Set: Set the Day, Mo\fth, Year, Hour and Mi\fute 
manually\b
 
✎Available only when C\bock	Mode is set to 
Ma\fua\b \b
Time	Zo\fe (depending on the \ycountry): Select you\yr time 
zone\b
 
✎When Cou\ftr y is set to Others , you can use this 
\function\b
 
✎This \function is only available when the C\bock	
Mode is set to Auto \b
	
¦ Usi\fg	the	S\beep	Timer
 
■ S\beep	Timer	t: Automatically shu\yts o\f\f the TV 
a\fter a preset period o\f time\y\b (30, 60, 90, 120,\y 150 and 
180 minutes)\b
 
✎To cancel S\beep	Timer , select Off\b
	
¦ Setti\fg	the	O\f	/	Off	Timer
 
■ Timer	1	/	Timer	2	/	Timer	3: Three di\f\ferent on / o\f\f 
timer settings can\y be made\b You must set the cl\yock first\b
O\f	Time	/	Off	Time: Set the hour, minute, and activ\yate 
/ inactivate\b (To activate timer w\yith the setting you\y’ve 
chosen, set to Activate\b)
Vo\bume: Set the desired volume level\b
Source: Select TV or USB content to be pla\yyed when 
the TV is turned on automaticall\yy\b (USB can be selected 
only when a USB devi\yce is connected to \ythe TV)
A\fte\f\fa (when the Source is set to TV): Select ATV or 
DTV\b
Cha\f\fe\b (when the Source is set to TV): Select the 
desired channel\b
Co\fte\fts (when the Source is set to USB): Select a 
\folder in the USB de\yvice containing mu\ysic or photo files \y
to be played when t\yhe TV is turned on automaticall\yy\b
 
✎NOTE
 
xI\f there is no music \file on the USB device or the 
\folder containing a music \file is not selected, the 
Timer \function does not operate correctly\b
 
xWhen there is only one photo \file in the USB 
device, the Slide Show will not play\b
 
xI\f a \folder name is too long, the \folder cannot be 
selected\b 
 
xEach USB you use is assigned its own \folder\b 
When using more than one o\f the same type o\f 
USB, make sure the \folders assigned to each 
USB have di\f\ferent names\b
Repeat: Select O\fce,	Everyday,	Mo\f~Fri,	Mo\f~Sat,	
Sat~Su\f or Ma\fua\b to set at you conv\yenience\b I\f you 
select Ma\fua\b, you can set up th\ye day you want to 
activate the timer\y\b
 
✎The c mark indicates the day is selected\b
 
✎Auto Power O\f\f (available only when the T V is turned on 
by Timer): The T V will be automatically turned o\f\f a\fter 3 
hours o\f being le\ft idle to prevent overheating\b
10 TVATV 1
0000

0000
Timer 1On Time
Off Time
Volume Inactivate
Inactivate
Sun
Mon TueWed Thu FriSatOnce Source
AntennaChannel
Repeat
L Move  U Adjust  E Enter  R Return
[UC8000]BN68-02697D-Eng.indb   232010-04-02   오후 7:55:00 
						

							24English
Basic Features
	
¦ Locki\fg	Programme
Security
 
✎The PIN input screen appears be\fore the setup screen\b 
 
✎Enter your 4-digit PIN, the de\fault o\f which is “0-0-0-0”\b 
Change the PIN using the Cha\fge	PIN option\b
 
■ Chi\bd	Lock	(Off	/	O\f): Lock channels in\y Cha\f\fe\b	
Ma\fager, to prevent unauthorized \yusers, such as 
children, \from watching unsuit\yable programme\b
 
✎Available only when the I\fput source is set to T V \b
 
■ Pare\fta\b	Lock (depending on the \ycountry): Prevent 
unauthorized users,\y such as children, \from watching 
unsuitable programme with a use\yr-defined 4-digit PIN \y
code\b I\f the selecte\yd channel is locked\y, the “
\” symbol 
will be displayed\b
A\b\bow	A\b\b: Unlock all TV ra\ytings\b 
 
■ Cha\fge	PIN: Change your perso\ynal ID number required 
to set up the TV\b
 
✎I\f you \forget the PIN code, press the remote 
control buttons in the \following sequence, which 
resets the PIN to “0-0-0-0”: POWER (o\f\f) → 
MUTE → 8 → 2 → 4 → POWER (on)\b
	
¦ Other	Features
La\fguage
 
■ Me\fu	La\fguage: Set the menu lang\yuage\b
 
■ Te\betext	La\fguage: Set a desired language \for tel\yetext\b
 
✎English is the de\fault in cases where the selected 
language is unavailable in the broadcast\b
 
■ Prefere\fce	(Primary	Audio	La\fguage	/	Seco\fdary	
Audio	La\fguage	/	Primary	Subtit\be	La\fguage	/	
Seco\fdary	Subtit\be	La\fguage	/	Primary	Te\betext	
La\fguage	/	Seco\fdary	Te\betext	La\fguage): Select 
a language, which \ywill be the de\fault\y language when a 
channel is selecte\yd\b 
Subtit\be
Use this menu to s\yet the Subtit\be mode\b 
 
■ Subtit\be	(Off	/	O\f): Switches subtitle\ys 
on or o\f\f\b
 
■ Mode	(Norma\b	/	Heari\fg	Impaired): 
Sets the subtitle m\yode\b
 
■ Subtit\be	La\fguage: Sets the subtitle\y 
language\b
 
✎I\f the programme you are watching does not 
support the Heari\fg	Impaired \function, Norma\b 
automatically activates even i\f the Heari\fg	
Impaired mode is selected\b
 
✎English is the de\fault in cases where the selected 
language is unavailable in the broadcast\b
Digita\b	Text	(Disab\be	/	E\fab\be)	
I\f the programme broadcasts with digit\yal text, this \featu\yre is 
enabled\b
 
■ MHEG (Multimedia and Hyp\yermedia In\formation\y Coding 
Experts Group): An International standard \for data 
encoding systems us\yed in multimedia an\yd hypermedia\b 
This is at a highe\yr level than the M\yPEG system which 
includes data-linki\yng hypermedia such \yas still images, 
character service,\y animation, graphi\yc and video files 
as well as multime\ydia data\b MHEG is use\yr runtime 
interaction techno\ylogy and is being a\ypplied to various 
fields including VOD\y (Video-On-Demand), IT\yV (Interactive 
TV), EC (Electronic Commerce), tele-education\y, 
telecon\ferencing, digital lib\yraries and network \ygames\b
Network	(Network	Type	/	Network	Setup	
/	Network	Test	/	SWL(Samsu\fg	Wire\bess	
Li\fk)	/	SWL	co\f\fect)
For details on sett\ying up options, re\fer to the “Networ\yk 
Connection” instru\yctions (p\b 28)\b
Ge\fera\b
 
■ Game	Mode	(Off	/	O\f): When connecting \yto a game 
console such as Pl\yayStation™ or Xbox™\y, you can enjoy 
a more realistic gaming ex\yperience by selecti\yng game 
mode\b
 
✎NOTE
 
xPrecautions and limitations \for game mode
 
– To disconnect the ga\yme console and conn\yect 
another external device, set Game	Mode to Off in 
the setup menu\b
 
– I\f you display the T\yV menu in Game	Mode, the 
screen shakes slightl\yy\b
 
xGame	Mode is not available when the input source 
is set to T V or PC\b
 
xA\fter connecting the game console, set Game	Mode 
to O\f \b Un\fortunately, you may notice reduced picture 
quality\b
 
xI\f Game	Mode is O\f :
 
– Picture mode is set to Sta\fdard and Sou\fd mode 
is set to Movie\b
 
– Equa\bizer is not available\b
SUBT .
[UC8000]BN68-02697D-Eng.indb   242010-04-02   오후 7:55:01 
						

							25English
03Basic	Features 
■ BD	Wise	(Off	/	O\f): Provides the optimal \ypicture quality 
\for Samsung DVD, Bl\yu-ray and Home Thea\ytre products 
which support BD	Wise\b When BD	Wise is turned O\f, 
the picture mode is automatic\yally changed to the\y optimal 
resolution\b
 
✎Available when connecting Samsung products 
that support BD	Wise through a HDMI cable\b
 
■ Me\fu	Tra\fspare\fcy	(Bright	/	Dark): Set the 
Transparency o\f the menu\b
 
■ Me\body	(Off	/	Low	/	Medium	/	High): Set so that a 
melody plays when th\ye TV is turned on or o\f\f\b
 
✎Me\body is disabled when FastStart is O\f \b
 
■ FastStart	(Off	/	O\f): When the TV is p\yowered on, the 
screen will come on q\yuickly with this \fe\yature\b
 
■ Light	Effect	(Off	/	I\f	Sta\fdby	/	Watchi\fg	TV	/	A\bways): 
You can turn the LED on/o\f\f on the \front o\f TV\b Turn it o\f\f to 
save power or i\f th\ye LED is too bright\y \for you\b
 
✎Set the Light E\f\fect to O\f\f to reduce the power 
consumption\b
 
✎The colour o\f light may very depending on the 
model\b
Commo\f	I\fterface
 
■ CI	Me\fu: This enables the\y user to select \from the CAM-
provided menu\b Select \ythe CI Menu based o\yn the menu 
PC Card\b
 
■ App\bicatio\f	I\ffo: View in\formation on \ythe CAM inserted 
into the CI slot a\ynd on the “CI or CI\y+ CARD” which is 
inserted into the C\yAM\b You can install the\y CAM anytime 
whether the TV is \yon or o\f\f\b
1.	 Purchase a CI CAM modu\yle at your nearest dealer or by 
phone\b
2.	 Firmly insert the “\yCI or CI+ CARD” in\yto the CAM in the \y
direction o\f the arrow\b
3.	 Insert the CAM wit\yh the “CI or CI+ C\yARD” into the 
common inter\face sl\yot, in the direction o\f the arrow so 
that it aligns par\yallel with the slo\yt\b
4.	 Check i\f you can se\ye a picture on a scrambled si\ygnal 
channel\b
Wire\bess	Remote	Co\ftro\b
Turn wireless remote controls on or o\f\f or give permissio\yn to 
wireless remote controls\b
	
¦ Picture	I\f	Picture	(PIP)
PIP	t
You can watch the T\yV tuner and one ext\yernal video source 
simultaneously\b PIP (Picture-in-Picture) does not \functio\yn in 
the same mode\b 
 
✎NOTE
 
xFor PIP sound, re\fer to the Sou\fd	Se\bect 
instructions\b
 
xI\f you turn the T V o\f\f while watching in PIP mode, the 
PIP window will disappear\b
 
xYou may notice that the picture in the PIP window 
becomes slightly unnatural when you use the main 
screen to view a game or karaoke\b
 
xWhile I\fter\fet@T V is in operation, the PIP \function 
cannot be used\b
 
xPIP settings
Mai\f	picture Sub	picture
Compo\fe\ft, HDMI1/DVI, 
HDMI2, HDMI3, HDMI4, 
PC TV
 
■ PIP	(Off	/	O\f): Activate or deact\yivate the PIP \funct\yion\b
 
■ Cha\f\fe\b: Select the channe\yl \for the sub-screen\b
 
■ Size	(
Õ	/	Ã	/	À	/	Œ): Select a size \for\y the sub-
picture\b
 
■ Positio\f	(
Ã	/	–	/	—	/	œ): Select a position\y \for the 
sub-picture\b
 
✎In Double (À, Œ) mode, Position cannot be 
selected\b
 
■ Sou\fd	Se\bect	(Mai\f	/	Sub): You can choose the \y
desired sound (Mai\f	/	Sub) in PIP mode\b
Support Menu
Se\bf	Diag\fosis
 
✎Sel\f Diagnostic might take \few seconds, this is part o\f 
the normal operation o\f the T V\b
 
■ Picture	Test	(Yes	/	No): Use to check \for \ypicture 
problems\b 
 
■ Sou\fd	Test	(Yes	/	No): Use the built-in\y melody sound to 
check \for sound problems\b 
 
✎I\f you hear no sound \from the T V’s speakers, 
be\fore per\forming the sound test, make sure 
Speaker	Se\bect is set to T V	Speaker in the 
Sou\fd menu\b
 
✎The melody will be heard during the test even i\f 
Speaker	Se\bect is set to Exter\fa\b	Speaker or the 
sound is muted by pressing the MUTE button\b
 
■ Sig\fa\b	I\fformatio\f: (digital channels\y only) HDTV 
channel’s reception quality is\y either per\fect or \ythe 
channels are unavailable\b Adju\yst your antenna to \y
increase signal strength\b 
 
■ Troub\beshooti\fg: I\f the TV seems t\yo have a problem, 
re\fer to this descri\yption\b
 
✎I\f none o\f these troubleshooting tips apply, contact 
the Samsung customer service centre\b
[UC8000]BN68-02697D-Eng.indb   252010-04-02   오후 7:55:01 
						

							26English
Basic Features
Software	Upgrade
Software	Upgrade can be per\formed v\yia a broadcasting 
signal or by networ\yk connection or dow\ynloading the latest\y 
firmware \from “www\bsamsung\bcom,” to a\y USB memory 
device\b
Curre\ft	Versio\f the so\ftware already installed in th\ye TV\b 
 
✎So\ftware is represented as “Year/Month/Day_Version”\b
I\fsta\b\bi\fg	the	Latest	Versio\f  
■ By	USB: Insert a USB 
drive containing th\ye 
firmware upgrade file, 
downloaded \from 
“www\bsamsung\bcom,” 
into the TV\b Please 
be care\ful not to 
disconnect the powe\yr 
or remove the USB 
drive until upgrade\ys are complete\b The TV \ywill be turned 
o\f\f and on automatica\ylly a\fter completin\yg the firmware 
upgrade\b When so\ftwa\yre is upgraded, video\y and audio 
settings you have m\yade will return to their de\fault \y
settings\b We advise you to to \ywrite down your set\ytings 
so that you can eas\yily reset them a\fter the\y upgrade\b
 
■ By	O\f\bi\fe: Upgrade the so\ftw\yare using the Internet\b
 
✎First, con\figure your network\b For detailed 
procedures on using the Network Setup, re\fer to 
the “Network Connection” instructions\b
 
✎I\f the internet connection doesn’t operate properly, 
the connection may be broken\b Please retry 
downloading\b I\f the problem persists, download by 
USB and upgrade\b
 
■ By	Cha\f\fe\b: Upgrade the so\ftw\yare using the 
broadcasting signal\b
 
✎I\f the \function is selected during the so\ftware 
transmission period, so\ftware will be automatically 
searched and downloaded\b 
 
✎The time required to download the so\ftware is 
determined by the signal status\b
 
■ Sta\fdby	Mode	Upgrade: A manual upgrade \ywill be 
automatically per\fo\yrmed at selected ti\yme\b Since the 
power o\f the unit i\ys turned on internally, the screen 
may be turned on slightly \for \ythe LED product\b This 
phenomenon may cont\yinue \for more than 1 hour unti\yl 
the so\ftware upgrade is comple\yte\b
 
■ A\bter\fative	Software	(backup): Displays the so\ftw\yare 
version downloaded t\yhrough By	O\f\bi\fe\b During the 
so\ftware upgrading, When t\yhe Upgrade will dis\ycontinue 
\from last step, this\y \function be activa\yted\b
HD	Co\f\fectio\f	Guide
Re\fer to this in\for\ymation when connec\yting external devices 
to the TV\b
Co\ftact	Samsu\fg
View this in\formatio\yn when your TV does\y not work properly 
or when you want to\y upgrade the so\ftwa\yre\b You can find 
in\formation regarding our call centr\yes, and how to down\yload 
products and so\ftware\b
USB Drive
TV Rear Panel
or
Software Upgrade
By USB 
   ►
By Online
By Channel
Standby Mode Upgrade  : Off
Alternative Software  2010/01/15_00000
U Move  E Enter  R Return
Current Version 2010/01/18_000001
[UC8000]BN68-02697D-Eng.indb   262010-04-02   오후 7:55:02 
						

							27English
04Adva\fced	Features
Ad\fanced Features
Connecting to a PC
Usi\fg	a\f	HDMI/DVI	Cab\be	/	a	D-sub	Cab\be
Disp\bay	Modes	(D-Sub	a\fd	HDMI/DVI	I\fput)
Optimal resolution is 1920 \yX 1080 @ 60 Hz\b
Mode Reso\butio\fHorizo\fta\b	Freque\fcy
(KHz) Vertica\b	Freque\fcy
(Hz) Pixe\b	C\bock	Freque\fcy
(MHz) Sy\fc	Po\barity
(H	/	V)
IBM 640 x 350
720 x 400 31\b469
31\b469  70\b086
70\b087 25\b175
28\b322+/-
-/+
MAC 640 x 480
832 x 624
1152 x 870 35\b000
49\b726
68\b681  66\b667
74\b551
75\b062 30\b240
57\b284
100\b000  -/-
-/-
-/-
VESA	CVT 720 x 576
1152 x 864
1280 x 720
1280 x 960  35\b910
53\b783
56\b456
75\b231  59\b950
59\b959
74\b777
74\b857 32\b750
81\b750
95\b750
130\b000 -/+
-/+
-/+
-/+
VESA	DMT 640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024 1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1600 x 1200
1680 x 1050 31\b469 
37\b861 
37\b500 
37\b879 
48\b077 
46\b875 
48\b363 
56\b476 
60\b023 
67\b500 
63\b981 
79\b976 
45\b000
49\b702 
62\b795 
60\b000 
47\b712 
55\b935 
70\b635 
75\b000
65\b290  59\b940
72\b809
75\b000
60\b317
72\b188
75\b000
60\b004
70\b069
75\b029 
75\b000
60\b020
75\b025
60\b000
59\b810
74\b934
60\b000
60\b015
59\b887
74\b984
60\b000
59\b95425\b175 
31\b500 
31\b500 
40\b000 
50\b000 
49\b500 
65\b000 
75\b000 
78\b750 
108\b000 
108\b000 
135\b000  74\b250
83\b500 
106\b500 
108\b000  85\b500 
106\b500 
136\b750 
162\b000
146\b250  -/-
-/-
-/-
+/+
+/+
+/+ -/-
-/-
+/+
+/+
+/+
+/+
+/+ -/+ 
-/+ 
+/+
+/+ -/+ 
-/+
+/+ -/+ 
VESA	GTF 1280 x 720 
1280 x 1024 52\b500 
74\b620  70\b000
70\b00089\b040
128\b943  -/+ 
-/-
VESA	DMT	/	DTV	CEA 1920 x 1080p
67\b500  60\b000148\b500 +/+
 
✎NOTE
 
xFor HDMI/DVI cable connection, you must use the HDMI	IN	1(DVI) jack\b 
 
xThe interlace mode is not supported\b 
 
xThe set might operate abnormally i\f a non-standard video \format is selected\b 
 
xSeparate and Composite modes are supported\b SOG(Sync On Green) is not supported\b 
AUDIO OU T
PC OUT
AUDIO OUT
PC OUT
[UC8000]BN68-02697D-Eng.indb   272010-04-02   오후 7:55:04 
						

							28English
Ad\fanced Features
Network Connection\h
You can set up your \yTV so that it can \yaccess the Internet through your local area network (LAN) u\ysing a wired or wireless 
connection\b
	
¦ Co\f\fecti\fg	to	a	Wired	Network
You can attach your \yTV to your LAN usin\yg cable in three ways:
 
y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to an ext\yernal modem using a C\yat 
5 cable\b See the dia\ygram below\b
 
y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to a IP Sh\yarer which is connec\yted 
to an external modem\b Use Cat \y5 cable \for the con\ynection\b See the dia\ygram below\b
 
y Depending on how yo\yur network is confi\ygured, you may be able \yto attach your TV t\yo your LAN by conne\ycting the LAN 
port on the back o\y\f your TV directly to a network \ywall outlet using \ya Cat 5 cable\b See \ythe diagram below\b Note that the wal\yl 
outlet is attached \yto a modem or router elsewhere in your house\b
I\f you have a Dynami\yc Network, you shou\yld use an ADSL modem\y or router that support\ys Dynamic Host Confi\yguration 
Protocol (DHCP)\b Mode\yms and routers that suppor\yt DHCP automatical\yly provide the IP address, subnet mask, \ygateway, 
and DNS values your \yTV needs to access \ythe Internet so you don’t have to enter th\yem manually\b Most h\yome networks are 
Dynamic Networks\b
Some networks require a Static IP address\b I\f your network\y requires a Static IP address, you must enter\y the IP address, 
subnet mask, gatew\yay, and DNS values m\yanually on your TV’\ys Cable Setup Screen when you set up\y the network 
connection\b To get the IP address, subnet mask, \ygateway, and DNS val\yues, contact your I\ynternet Service Provider (ISP)\b I\f 
you have a Windows computer, you can also get \ythese values through your computer\b 
 
✎You can use ADSL modems that support DHCP i\f your network requires a Static IP address\b ADSL modems that 
support DHCP also let you use Static IP addresses\b
The Modem Port on t\yhe Wall
TV Rear Panel
LAN Cable LAN Adapter
Modem Cable External Modem 
(ADSL / VDSL / Cabl\ye TV)
The Modem Port on the Wall TV Rear Panel
LAN Cable
LAN Cable
Modem Cable External Modem 
(ADSL / VDSL / Cabl\ye TV) IP Sharer
(having DHCP serve\yr)
LAN Adapter
The LAN Port on the Wall TV Rear Panel
LAN Cable LAN Adapter
[UC8000]BN68-02697D-Eng.indb   282010-04-02   오후 7:55:06 
						

							29English
04Adva\fced	FeaturesNetwork	Setup	(Auto)
Use the Automatic \yNetwork	Setup when connecting yo\yur 
TV to a network th\yat supports DHCP\b To set up your TV’s 
cable network conn\yection automatical\yly, \follow these st\yeps:
How	to	set	up	automatica\b\by
1.	Connect your TV to \yyour LAN as describ\yed in the 
previous section\b
2.	 Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select \ySetup, and 
then press the ENTER
E button\b
3.	 Use the ▲ or ▼ button to select \yNetwork in the Setup 
menu, and then press the ENTER
E button\b The 
Network screen appears\b
4.	 On the Network screen, select Network	Type\b
5.	 Set Network	Type to Wired\b
6.	 Select Network	Setup\b The Network	Setup screen 
appears\b
7.	 Set I\fter\fet	Protoco\b	Setup to Auto\b 
8.	 Auto acquires and enters the n\yeeded Internet values  automatically\b
9.	 When done, press the RETURN button on your remote\b
10.	 Select Network	Test to check the Inte\yrnet connectivity\b
11.	 I\f the Network Function has not \yacquired the network 
connection values,\y go to the directions \for Ma\fua\b\b
Network	Setup	(Ma\fua\b)
Use the Manual Network	Setup when connecting yo\yur TV to 
a network that requires a Static IP address\b 
Getti\fg	the	Network	Co\f\fectio\f	Va\bues
To get the Network \yconnection values \yon most Windows 
computers, \follow t\yhese steps:
1.	 Right click the Ne\ytwork icon on the \ybottom right o\f the\y 
screen\b
2.	 In the pop-up menu\y that appears, cli\yck Status\b
3.	 On the dialog that \yappears, click the\y Support tab\b
4.	 On the Support Tab, click the Deta\yils button\b The 
Network connection\y values are displayed\b
How	to	set	up	ma\fua\b\by
To set up your TV’s cable network co\ynnection manually, \y
\follow these steps:\y 
1.	 Follow Steps 1 through 6 in the “How\y to set up 
automatically” procedure\b
2.	 Set I\fter\fet	Protoco\b	Setup to Ma\fua\b\b
3.	 Press the ▼ button on your remote to go to the\y first 
entry field\b
4.	 Enter the IP	Address, Sub\fet	Mask, Gateway, and 
DNS	Server values\b Use the nu\ymber buttons on you\yr 
remote to enter num\ybers and the arrow buttons to move\y 
\from one entry field t\yo another\b
5.	 When done, press the RETURN button on your remote\b
6.	 Select Network	Test to check the Inte\yrnet connectivity\b
Network Setup
IP Address   :       
Subnet Mask  :       
Gateway  :       
DNS  : Auto
DNS Server   : 
      
U Move    E Enter    R Return
Internet Protocol Setup  : Auto ►
Network
U Move    E Enter    R Return
Network Type   : Wired ►
Network Setup 
Network Test
SWL(Samsung Wireless Link)  : Off
SWL connect 
[UC8000]BN68-02697D-Eng.indb   292010-04-02   오후 7:55:06 
						

							30English
Ad\fanced Features
	
¦ Co\f\fecti\fg	to	a	Wire\bess	Network
To connect your TV t\yo your network wirelessly, you need a \ywireless router or modem and \ya Samsung Wireless LAN Adapter 
(WIS09ABGN, WIS09AB\yGN2, WIS10ABGN), wh\yich you connect to \yyour TV’s back or side pane\yl USB jack\b See the \yillustration below\y\b
Samsung’s Wireless LAN adapter i\ys sold separately a\ynd is o\f\fered by select retailers, Ecommerce sites and Samsun\ygparts\b
com\b Samsung’s Wireless LAN adapter s\yupports the IEEE 802\b\y11A/B/G and N commu\ynication protocols\b Samsung 
recommends using IEEE \y802\b11N\b When you pl\yay the video over a\y IEEE 802\b11B/G conne\yction, the video ma\yy not play 
smoothly\b
 
✎NOTE
 
xYou must use the “Samsung Wireless L AN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless 
network\b 
 
xSamsung’s Wireless L AN adapter is sold separately\b The Samsung Wireless L AN adapter is o\f\fered by select 
retailers, Ecommerce sites and Samsungparts\bcom\b 
 
xTo use a wireless network, your T V must be connected to a wireless IP sharer\b I\f the wireless IP sharer supports 
DHCP, your T V can use a DHCP or static IP address to connect to the wireless network\b 
 
xSelect a channel \for the wireless IP sharer that is not currently being used\b I\f the channel set \for the wireless IP sharer 
is currently being used by another device nearby, this will result in inter\ference and communication \failure\b 
 
xI\f you apply a security system other than the systems listed blow, it will not work with the T V\b 
 
xI\f Pure High-throughput (Green\field) 802\b11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) \for your AP, Samsung T Vs will not support a connection in compliance with new Wi-Fi certi\fication 
speci\fications\b 
 
xI\f your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button 
Con\figuration) or PIN (Personal Identi\fication Number)\b WPS will automatically con\figure the SSID and WPA key in 
either mode\b
 
xI\f your router, modem, or device isn’t certi\fied, it may not connect to the T V via the “Samsung Wireless L AN Adapter\b”
 
xCo\f\fectio\f	Methods : You can setup the wireless network connection six ways\b 
 
– Samsung Auto Configu\yration
 
– PBC	(WPS)
 
– Auto Setup (Using t\yhe Auto Network Sea\yrch \function)
 
– Manual Setup
 
– SWL(Samsu\fg	Wire\bess	Li\fk)
 
– Ad-Hoc
 
xThe Samsung Wireless L AN Adapter may not be recognized or work properly when connecting via a USB hub or via 
a USB extension cable other than the one available \from Samsung\b
TV Rear Panel
The LAN Port on 
the Wall
LAN CableWireless IP sharer
(AP having DHCP se\yrver)
Samsung Wireless
LAN Adapter
 
✎To use the  SWL(Samsu\fg 	Wire\bess 	Li\fk)  \function, connect to the  USB	1 	(HDD)  port\b
or
[UC8000]BN68-02697D-Eng.indb   302010-04-02   오후 7:55:08