Samsung UE 46C8000 User Manual

							11English
02Co\f\fectio\fs
Changing the \fnput S\hource
Source	List
Use to select TV o\yr an external input 
sources such as a DVD \y/ Blu-ray player / \y
cable box / STB sat\yellite receiver\b 
 
■ TV	/	Ext.1	/	Ext.2	/	PC	/	AV	/	
Compo\fe\ft	/	HDMI1/DVI	/	HDMI2	/	
HDMI3	/	HDMI4	/	USB
 
✎In the Source	List , connected 
inputs will be highlighted\b 
 
✎Ext.1 , Ext.2 and PC always stay activated\b
Edit	Name
 
■ VCR	/	DVD	/	Cab\be	STB	/	Sate\b\bite	STB	/	PVR	STB	/	
AV	Receiver	/	Game	/	Camcorder	/	PC	/	DVI	PC	/	DVI	
Devices	/	TV	/	IPTV	/	B\bu-ray	/	HD	DVD	/	DMA: Name 
the device connecte\yd to the input jack\ys to make your 
input source selection easie\yr\b
 
✎When a PC with a resolution o\f 1920 x 1080 @ 
60Hz is connected to the HDMI	IN	1(DVI)	port, 
you should set to DVI	PC mode under Edit	Name \b
 
✎When connecting an HDMI/DVI cable to the HDMI	
IN	1(DVI) port, you should set to DVI	PC or DVI	
Devices mode under Edit	Name \b
CONNECTIONS	COMMON	INTERFACE	S\bot
To watch paid channe\yls, the “CI or CI+\y CARD” must be ins\yerted\b  
y I\f you don’t insert the “CI o\yr CI+ CARD,” some \ychannels will 
display the message\y “Scrambled Signal”\b\y
 
y The pairing in\forma\ytion containing a \ytelephone number, the “CI or 
CI+ CARD” ID the H\yost ID and other in\y\formation will be d\yisplayed 
in about 2~3 minut\yes\b I\f an error message is displ\yayed, please 
contact your servic\ye provider\b
 
y When the configurat\yion o\f channel in\fo\yrmation has finishe\yd, the 
message “Updating C\yompleted” is displa\yyed, indicating the \y
channel list is up\ydated\b
 
✎NOTE
 
xYou must obtain a “CI or CI+ CARD” \from a local cable service provider\b 
 
xWhen removing the “CI or CI+ CARD”, care\fully pull it out with your hands since dropping the “CI or CI+ CARD” may 
cause damage to it\b
 
xInsert the “CI or CI+ CARD” in the direction marked on the card\b
 
xThe location o\f the COMMON	INTERFACE slot may be di\f\ferent depending on the model\b
 
x“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer\b
 
xI\f you have any problems, please contact a service provider\b
 
xInsert the “CI or CI+ CARD” that supports the current antenna settings\b The screen will be distorted or will not be 
seen\b
SOURCE
[UC8000]BN68-02697D-Eng.indb   112010-04-02   오후 7:54:49 
						

							12English
Basic Features
How to Navigate Me\hnus
Be\fore using the TV, \follow the steps \ybelow to learn how to 
navigate the menu \yand select and adjus\yt di\f\ferent \functions\b
1	ENTERE / Direction button: Mov\ye the cursor and 
select an item\b Con\yfirm the setting\b
2	 RETURN button: Returns to the previous menu\b
3	 MENU button: Displays t\yhe main on-screen menu\b
4	 EXIT button: Exits the \yon-screen menu\b
How	to	Operate	the	OSD	(O\f	Scree\f	Disp\bay)
The access step ma\yy di\f\fer depending on the\y selected menu\b
1MENU mThe main menu opti\yons appear on 
the screen:
Picture, Sou\fd, Cha\f\fe\b, Setup, 
I\fput, App\bicatio\f, Support\b
2▲ / ▼ Select an icon with\y the ▲ or ▼ 
button\b
3ENTER EPress ENTERE to access the 
sub-menu\b
4▲ / ▼ Select the desired submenu with 
the ▲ or ▼ button\b
5◄ / ►Adjust the value o\f\y an item with the \y
◄ or ► button\b The adjust\yment in 
the OSD may di\f\fer depending on 
the selected menu\b
6ENTER EPress ENTERE to complete the 
configuration\b
7EXIT ePress EXIT\b
Using the INFO button (Now & Nex\ht gui\be)
The display identifie\ys the current channel 
and the status o\f c\yertain audio-video \y
settings\b
The Now & Next gui\yde shows daily TV 
programme in\formation\y \for each channel 
according to the broadcasting time\b
 
y Scroll ◄, ► to view in\formatio\yn \for a 
desired programme while watc\yhing the 
current channel\b 
 
y Scroll  ▲, ▼ to view in\formation \for other channels\b I\f you 
want to move to th\ye currently selected chan\ynel, press 
the ENTER
E button\b
DTV  Air
15
DEF18:00  ~ 6:00  Life  On Venu\f  AvenueUnc\ba\f\fified
No  Detai\bd  Information 
 E 
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) 
in\formation is provided by broadcasters\b 
Using programme schedules p\yrovided 
by broadcasters, you can\y speci\fy 
programmes you want t\yo watch in 
advance so that the\y channel automatic\yally 
changes to the sel\yected programme 
channel at the spe\ycified time\b Programme 
entries may appear \yblank or out o\f dat\ye depending on a 
channel status\b 
Usi\fg	Cha\f\fe\b	View
 
POWERSOURCEON/OFF
PRE-CH
INTERNET@TV
CONTENT
MEDI\f.P
P.SIZE\fDSUBT.
\fBCD
\bD
TTX/MIX
GUIDE
CH LIST
MUTE
TOOLSINFO
2
1
4
3
RETURNEXIT
MENU
INFO
GUIDE
18:11 Thu 6 Jan
Watch
Information
 DTV Air 800 fiveHome and Awa\f
18:00 - 18:\b0
DramaDani is devastated\w when scott makes c\wlear his views on m\warriage...
 
 
 27
28
800
24
16
6 Discover\f
Discover\fH&
L
five
price-drop.tv
QVC
R4DTTAmerican Choppe rProgrammes resume \wat 06:00
Home and...
No Information
QVC Selection
No Information Tine Team
Fiv...
18:00 - 19:00
19:00 - 20:00)Famil\f Affairs)Dark Angel
800 ve
 View Mode  +24 Hours    Ch. Mode    Information   k Page E Watch
2:10 Tue 1 Jun
Guide
Channel View - TV
123456
       Today
[UC8000]BN68-02697D-Eng.indb   122010-04-02   오후 7:54:51 
						

							13English
03Basic	FeaturesUsi\fg	Schedu\bed	View
1	
 Red (View	Mode): View the list o\f programmes that 
are playing now or co\yming up\b
2	
 Yellow (+24	Hours): Viewing the list o\f \yprogrammes to 
be broadcasted a\fter 24 h\yours\b
3	
 Blue (Ch.	Mode): Select the type \yo\f channels you 
want to display on \ythe Cha\f\fe\b	View window\b (A\b\b, TV, 
Radio, Data/Other, My	Cha\f\fe\b	1~4) 
4	 I\fformatio\f: Displays details \yo\f the selected 
programme\b
5	
k (Page): Move to next or\y previous page\b
6	 ENTER
E button
 
– When selecting the\y current programme, you can 
watch the selected \yprogramme\b
 
– When selecting the\y \future programme, you can 
reserve to watch th\ye selected programme\b To cancel 
the schedule, press the ENTER
E button again and 
select Ca\fce\b	Schedu\bes\b
Cha\f\fe\b	Ma\fager
Delete or set \favou\yrites channels and \yuse the programme 
guide \for digital br\yoadcasts\b Select a c\yhannel in the 
Cha\f\fe\bs, My	Cha\f\fe\bs or Schedu\bed screen\b
 
■
	Cha\f\fe\bs: Shows the channel\y list according to 
channel type\b
 
■
*	My	Cha\f\fe\bs: Shows the group o\f the channel\b\y
 
■
Schedu\bed: Shows all the cur\yrently reserved 
programmes\b
 
✎Using the colour buttons with the Cha\f\fe\b	Ma\fager
 
x Red ( A\fte\f\fa ): Toggle among Air or Cab\be \b
 
xB Green ( Zoom): Enlarges or shrinks a channel 
number\b
 
x Yellow ( Se\bect): Select desired channels and press 
the Yellow button to set all the selected channels at 
the same time\b The 
c mark appears to the le\ft o\f 
the selected channels\b 
 
x Blue ( Sort): Change the list ordered by channel 
name or channel number\b
 
xk ( Page ): Move to next or previous page\b
 
xT ( Too\bs ): Displays the Cha\f\fe\b	Ma\fager option 
menu\b (The options menus may di\f\fer depending on 
the situation\b)
Cha\f\fe\b	Status	Disp\bay	Ico\fs
Ico\fs Operatio\fs
AAn analogue channe\yl\b
cA channel selected\b\y
*A channel set as a\y Favourite\b
( A programme currently being broadcast\b
\A locked channel\b
)A reserved programme\b
Guide	Type	(Samsu\fg	/	Guide	P\bus+)
(depending on the c\yountry)
You can select a di\f\y\ferent type o\f Guide\b
 
■ Samsu\fg: Uses the guide pr\yogramme by provided 
samsung\b
 
■ Guide	P\bus+: Uses the guide pr\yogramme provided by 
Rovi International Solutions\b\y For more in\formation, re\fer 
to “www\beurope\bguideplus\bcom\b”
	
¦ Usi\fg	Favourite	Cha\f\fe\bs
* My	Cha\f\fe\bs
(in Cha\f\fe\b	Ma\fager)
Shows all \favourite\y channels\b
 
■ Edit	My	Cha\f\fe\bs	
t: You can set the sel\yected 
channels to desired my channels group\b 
 
✎The “*” symbol will be displayed and the channel will 
be set as a my channel\b
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Add or delete a chan\ynel in the my chann\yel groups 
you want among 1, 2\y, 3 and 4\b
 
xOne or more groups can be selected\b
c  1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33    Boonerang
  32   Cartoon Nwk
  5    Class News
  4  \ Coming Soon
  27   Discovery
r
Air                      Antenna  B Zoom   Select   Sort   k Page  T Tools
Channels
 DTV Air 800 fiveFamily Affairs
18\f00 - 18\f30
DramaTanya \bonfesses all \1to a stunned Babs. \1Conrad is anxious to\1 hear...
 
 
 18\f30
19\f15)Family Affairs)Dark Ange l 800
800
five
five
800 ve
 View Mode    Information   E Cancel
2:10 Tue 1 Jun
Guide
Scheduled View
146
Today
Today
All
TV
Radio
Data/Other
Analogue
[UC8000]BN68-02697D-Eng.indb   132010-04-02   오후 7:54:53 
						

							14English
Basic Features
3.	A\fter you have chan\yged the settings, t\yhe channel list 
\for each group can be viewed i\yn my channels\b
Cha\f\fe\b	List
You can see all the\y channels searched\b
Channel Menu
	
¦ Retu\fi\fg	Cha\f\fe\bs
A\fte\f\fa	(Air	/	Cab\be)
Be\fore your television c\yan begin memorizin\yg the available 
channels, you must \yspeci\fy the type o\f \ysignal source that is 
connected to the TV\y (i\be\b an Air or a \yCable system)\b
Cou\ftry	
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
 
■ Digita\b	Cha\f\fe\b: Change the count\yry \for digital 
channels\b
 
■ A\fa\bogue	Cha\f\fe\b: Change the count\yry \for analogue 
channels\b
Auto	Store	
Scans \for a channel\y automatically and \ystores in the TV\b
 
✎Automatically allocated programme numbers may not 
correspond to actual or desired programme numbers\b I\f 
a channel is locked using the Chi\bd	Lock \function, the 
PIN input window appears\b
 
■ A\fte\f\fa	Source	(Air	/	Cab\be)t: Select the 
antenna source to memorise\b
 
■ Cha\f\fe\b	Source	(Digita\b	&	A\fa\bogue	/	Digita\b	/	
A\fa\bogue): Select the channe\yl source to memorise\b
When selecting Cab\be → Digita\b	&	A\fa\bogue or Digita\b: 
Provide a value to sc\yan \for cable channe\yls\b
Search	Mode	(Fu\b\b	/	Network	/	Quick): Scans \for all 
channels with acti\yve broadcast stations an\yd stores them 
in the TV\b
 
✎I\f you select Quick , you can set up the Network , 
Network	ID , Freque\fcy , Modu\batio\f and 
Symbo\b	Rate manually by pressing the button on 
the remote control\b
Network	(Auto	/	Ma\fua\b): Selects the Network	ID 
setting mode among \yAuto or Ma\fua\b\b
Network	ID: When Network is Ma\fua\b, you can set up 
Network	ID using the numeric\y buttons\b
Freque\fcy: Displays the \frequency \for the cha\ynnel\b 
(di\f\fers in each countr\yy)
Modu\batio\f: Displays availabl\ye modulation values\y\b
Symbo\b	Rate: Displays availabl\ye symbol rates\b
Ma\fua\b	Store	
Scans \for a channel\y manually and stores in the TV\b
 
✎I\f a channel is locked using the Chi\bd	Lock \function, 
the PIN input window appears\b
 
■ Digita\b	Cha\f\fe\b: When scanning ha\ys finished, channels\y 
are updated in the ch\yannel list\b
 
✎When selecting A\fte\f\fa → Air : Cha\f\fe\b, 
Freque\fcy , Ba\fdwidth
 
✎When selecting A\fte\f\fa → Cab\be : Freque\fcy, 
Modu\batio\f , Symbo\b	Rate
 
■ A\fa\bogue	Cha\f\fe\b	(Programme,	Co\bour	System,	
Sou\fd	System,	Cha\f\fe\b,	Search): I\f there is abnormal 
sound or no sound, \yreselect the sound s\ytandard 
required\b
 
✎Channel mode
 
xP (programme mode): When tuning is complete, 
the broadcasting stations in your area have been 
assigned to position numbers \from P0 to P99\b You 
can select a channel by entering the position number 
in this mode\b
 
xC (aerial channel mode) / S (cable channel mode): 
These two modes allow you to select a channel 
by entering the assigned number \for each aerial 
broadcasting station or cable channel\b
CH LIST
c  1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33    Boonerang
  32   Cartoon Nwk
  5    Class News
  4  \ Coming Soon
  27   Discovery
r
Air                     Antenna  B Zoom   Select   Sort   k Page  T Tools
Channels
Edit My Channels
Lock
Timer Recording 
Timer Viewing
Edit Channel Number
Delete 
d
All
TV
Radio
Data/Other
Analogue
[UC8000]BN68-02697D-Eng.indb   142010-04-02   오후 7:54:53 
						

							15English
03Basic	Features	
¦ Editi\fg	Cha\f\fe\bs
Cha\f\fe\b	Ma\fager	Optio\f	Me\fu	
(in Cha\f\fe\b	Ma\fager)
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Edit the channel nam\ye or number using \ythe Edit	
Cha\f\fe\b	Name or Edit	Cha\f\fe\b	Number menu\b
 
■ Edit	Cha\f\fe\b	Name (analogue channel\ys only): Assign 
your own channel na\yme\b
 
■ Edit	Cha\f\fe\b	Number (digital channels \yonly): Edit the 
number by pressing the number \ybuttons desired\b
	
¦ Other	Features
Cab\be	Search	Optio\f
(depending on the c\yountry) 
Sets additional sear\ych options such as\y the \frequency and 
symbol rate \for a c\yable network search\b
 
■ Freq.Start	/	Freq.Stop: Set the start or \ystop \frequency 
(di\f\fers in each countr\yy)\b
 
■ Modu\batio\f: Displays availabl\ye modulation values\y\b
 
■ Symbo\b	Rate: Displays availabl\ye symbol rates\b
Cha\f\fe\b	Ma\fager
Cha\f\fe\b	Ma\fager	Optio\f	Me\fu	
Set each channel us\ying the Cha\f\fe\b	Ma\fager menu options 
(Lock / U\f\bock, Timer	Recordi\fg, Timer	Viewi\fg, Sort, 
De\bete, Se\bect	A\b\b / Dese\bect	A\b\b)\b Option menu item\ys may 
di\f\fer depending on the\y channel status\b
1.	Select a channel an\yd press the TOOLS button\b
2.	 Select a \function a\ynd change its setti\yngs\b
 
■ Lock	/	U\f\bock: Lock a channel s\yo that the channel\y 
cannot be selected \yand viewed\b
 
✎NOTE
 
xThis \function is available only when the Chi\bd	Lock 
is set to O\f \b
 
xThe PIN input screen appears\b Enter your 4-digit PIN, 
the de\fault o\f which is “0-0-0-0”\b Change the PIN 
using the Cha\fge	PIN option\b
 
■ Timer	Recordi\fg (digital channels \yonly): Allows you t\yo 
record a programme currently being broadcasted or 
make a reservation to record a programme scheduled 
\for broadcast\b 
 
✎A USB device with 4GB o\f memory or greater 
must be connected to the T V\b
 
✎A USB storage device cannot record until it 
completes the Device Per\formance Test\b
 
✎Bei einer USB-Festplatte mit mehr als 5400 U/min
 
✎Bei einem USB-Stick (Typ USB 2\b0 und SLC)\b 
(Mindestkapazität des USB-Sticks von 2 GB\b)
 
■ Timer	Viewi\fg: You can set a desired channel to be 
displayed automatica\ylly at the reserved time\b Set th\ye 
current time first to u\yse this \function\b 
 
✎When a digital channel is selected, press the ► 
button to view the digital Programme\b
 
■ Sort (analogue channel\ys only): This opera\ytion allows 
you to change the p\yrogramme numbers o\f \ythe stored 
channels\b This oper\yation may be necess\yary a\fter using 
the auto store\b 
 
■ De\bete: You can delete a cha\ynnel to display the\y channels 
you want\b
 
■ Se\bect	A\b\b	/	Dese\bect	A\b\b: Select all the ch\yannels 
or deselect all the\y selected channels \yin the channel 
manager\b
Cha\f\fe\b	List	Tra\fsfer
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Imports or exports\y the channel map\b Y\you should connect a\y 
USB storage to use \ythis \function\b
 
■ Import	from	USB: Import channel l\yist \from USB\b
 
■ Export	to	USB: Export channel li\yst to USB\b this \func\ytion 
is available when \yUSB is connected\b
Schedu\bed	
(in Cha\f\fe\b	Ma\fager)
You can view, modi\fy or delete a\y show you have reserved to 
watch\b
 
■ Cha\fge	I\ffo: Change a show you\y have reserved to 
watch\b
 
■ Ca\fce\b	Schedu\bes: Cancel a show you\y have reserved 
to watch\b
 
■ I\fformatio\f: Display a show yo\yu have reserved 
to watch\b (You can also change\y the reservation 
in\formation\b)
 
■ Se\bect	A\b\b	/	Dese\bect	A\b\b: Select or deselec\yt all reserved 
programmes\b
Fi\fe	Tu\fe	
(analogue channels\y only) 
I\f the signal is we\yak or distorted, fin\ye tune the channel\y 
manually\b
 
✎Fine tuned channels are marked with an asterisk “*”\b
 
✎To reset the \fine-tuning, select Reset \b
[UC8000]BN68-02697D-Eng.indb   152010-04-02   오후 7:54:54 
						

							16English
Basic Features
Picture Menu
	
¦ Cha\fgi\fg	the	Preset	Picture	Mode
Mode	t
Select your pre\ferred picture type\b 
 
■ Dy\famic: Suitable \for a br\yight room\b
 
■ Sta\fdard: Suitable \for a no\yrmal environment\b
 
■ Natura\b: Suitable \for reducing eye strain\b
 
✎Natura\b is not available in PC mode\b
 
■ Movie: Suitable \for watc\yhing movies in a da\yrk room\b
	
¦ Adjusti\fg	Picture	Setti\fgs
Back\bight	/	Co\ftrast	/	Bright\fess	/	
Sharp\fess	/	Co\bour	/	Ti\ft	(G/R)	
Your television has\y several setting o\yptions \for picture quality 
control\b
 
✎NOTE
 
xIn analogue T V , Ext., AV modes o\f the PAL system, 
the Ti\ft	(G/R) \function is not available\b
 
xIn PC mode, you can only make changes to 
Back\bight , Co\ftrast and Bright\fess \b
 
xSettings can be adjusted and stored \for each 
external device connected to the T V\b
	
¦ Eco\fomica\b	So\butio\fs
Eco	So\butio\f
 
■ E\fergy	Savi\fg	(Off	/	Low	/	Medium	/	High	/	Picture	
Off	/	Auto)	t: This adjusts the \ybrightness o\f the 
TV in order to reduce power consump\ytion\b I\f you select \y
Picture	Off, the screen is turned o\f\f, but the sound 
remains on\b Press any button exce\ypt volume button t\yo 
turn on the screen\b 
 
■ Eco	Se\fsor	(Off	/	O\f): To enhance your powe\yr savings; 
the picture settings will au\ytomatically adapt t\yo the light 
in the room\b
 
✎ I\f you adjust the Back\bight , the Eco	Se\fsor will 
be set to Off \b
Mi\f	Back\bight: When Eco	se\fsor is O\f, the minimum 
screen brightness can\y be adjusted manual\yly\b
 
✎I\f Eco	Se\fsor is O\f , the display brightness 
may change (become slightly darker or brighter) 
depending on the surrounding light intensity\b
 
■ No-Sig\fa\b	Power	Off	(Off	/	15	mi\f	/	30	mi\f	/	60	mi\f): 
To avoid unnecessary\y energy consumption\y, set how long 
you want the TV to \yremain on i\f it’s not receiving a signal\b
 
✎Disabled when the PC is in power saving mode\b
	
¦ Cha\fgi\fg	the	Picture	Optio\fs
Adva\fced	Setti\fgs
(available in Sta\fdard	/	Movie mode) 
You can adjust the d\yetailed setting \for\y the screen including 
colour and contrast\y\b
 
✎In PC mode, you can only make changes to Dy\famic	
Co\ftrast , Gamma , White	Ba\ba\fce and LED	Motio\f	
P\bus \b
 
■ B\back	To\fe	(Off	/	Dark	/	Darker	/	Darkest): Select the 
black level to adju\yst the screen depth\b
 
■ Dy\famic	Co\ftrast	(Off	/	Low	/	Medium	/	High): Adjust 
the screen contrast\b
 
■ Gamma: Adjust the primar\yy colour intensity\b
 
■ Expert	Patter\f	(Off	/	Patter\f1	/	Patter\f2): By running 
the Expert	Patter\f \function, the pict\yure can be 
calibrated without \ya generator or filt\yer\b I\f the OSD menu 
disappears or a men\yu other than the Picture menu is 
opened, the calibra\ytion is saved and t\yhe Expert	Patter\f 
window disappears\b
 
✎While the Expert	Patter\f is running, sound is not 
outputted\b
 
✎Only enabled on DT V, Component / HDMI models\b
 
✎Disabled \for channels that support MHEG i\f 
Digita\b	Text is E\fab\be \b
 
■ RGB	O\f\by	Mode	(Off	/	Red	/	Gree\f	/	B\bue): You can 
adjust Co\bour or Ti\ft	(G/R) o\f Red,	Gree\f or B\bue \for 
the picture \from an external device (DVD pla\yyer, home 
theatre, etc\b)\b 
 
■ Co\bour	Space	(Auto	/	Native	/	Custom): Adjust the 
range o\f colours av\yailable to create the image\b To adjust 
Co\bour,	Red,	Gree\f,	B\bue and Reset, set Co\bour	
Space to Custom\b
Advanced Settings
Black Tone   : Off  ►
Dynamic Contrast  : Medium
Gamma  : 0
Expert Pattern   : Off
RGB Only Mode  : Off
Colour Space  : Native
White Balance
▼
U Move  E Enter  R Return
[UC8000]BN68-02697D-Eng.indb   162010-04-02   오후 7:54:55 
						

							17English
03Basic	Features 
■ White	Ba\ba\fce: Adjust the colour\y temperature \for a 
more natural picture\b
R-Offset	/	G-Offset	/	B-Offset: Adjust each colou\yr’s 
(red, green, blue) darkness\y\b
R-Gai\f	/	G-Gai\f	/	B-Gai\f: Adjust each colou\yr’s (red, 
green, blue) brightn\yess\b
Reset: Resets the White	Ba\ba\fce to it’s de\fault settings\b
 
■ 10p	White	Ba\ba\fce	(Off	/	O\f): Controls the white 
balance in 10 poin\yt interval by adjus\yting the red, green, 
and blue brightness\y\b
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b
 
✎Some external devices may not support this 
\function\b
I\fterva\b: Select interval t\yo adjust\b
Red: Adjust the red level\b
Gree\f: Adjust the green level\b
B\bue: Adjust the blue l\yevel\b
Reset: Resets the 10p	White	Ba\ba\fce to its de\fault 
settings\b
 
■ F\besh	To\fe: Emphasize pink “F\ylesh Tone\b”
 
■ Edge	E\fha\fceme\ft	(Off	/	O\f): Emphasize object \y
boundaries\b
 
■ xvYCC	(Off	/	O\f): Setting the xvYCC mode on 
increases detail and colour space when watching movies 
\from an external device (e\bg\b DVD\y player) connected \yto 
the HDMI or Compon\yent IN jacks\b
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b
 
✎Some external devices may not support this 
\function\b
 
■ LED	Motio\f	P\bus	(Off	/	Norma\b	/	Ci\fema	/	Ticker): 
Removes drag \from \fast scenes with\y a lot o\f movement \y
to provide a clear pictu\yre\b
Picture	Optio\fs
 
✎In PC mode, you can only make changes to the Co\bour	
To\fe , Size , and Auto	Protectio\f	Time \b 
■ Co\bour	To\fe	(Coo\b	/	Norma\b	/	Warm1	/	Warm2)	
 
✎Warm1 or Warm2 will be deactivated when the 
picture mode is Dy\famic \b
 
✎Settings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 
■ Size: Your cable box/sate\yllite receiver 
may have its own se\yt o\f screen 
sizes as well\b Howe\yver, we highly 
recommend you use 16\y:9 mode most 
o\f the time\b
Auto	Wide: Automatically adj\yusts the 
picture size to the 16:9\y aspect ratio\b
16:9: Adjusts the pictu\yre size to 16:9 
\for DVDs or wide br\yoadcasting\b
Wide	Zoom: Magnifies the pic\yture size more than 4:3\b 
 
✎Adjusts the Positio\f by using ▲ , ▼ buttons\b
Zoom: Magnifies the 16:\y9 wide pictures vertically to fit\y 
the screen size\b
 
✎Adjusts the Positio\f or Size by using ▲ , ▼ 
button\b
4:3: The de\fault setti\yng \for a movie or n\yormal 
broadcasting\b
 
✎Do not watch in 4:3 \format \for a long time\b Traces 
o\f borders displayed on the le\ft, right and centre 
o\f the screen may cause image retention(screen 
burn) which are not covered by the warranty\b
Scree\f	Fit: Displays the \full\y image without any \ycut-o\f\f 
when HDMI (720p / \y1080i / 1080p) or \yComponent 
(1080i / 1080p) si\ygnals are inputted\b
 
✎NOTE
 
xDepending on the input source, the picture size 
options may vary\b
 
xThe available items may di\f\fer depending on the 
selected mode\b
 
xIn PC mode, only 16:9 and 4:3 modes can be 
adjusted\b
 
xSettings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 
xA\fter selecting Scree\f	Fit in HDMI (1080i / 1080p) 
or Compo\fe\ft (1080i / 1080p) mode: Adjusts the 
Positio\f or Size by using 
▲, ▼, ◄, ► button\b
 
xI\f you use the Scree\f	Fit \function with HDMI 720p 
input, 1 line will be cut at the top, bottom, le\ft and 
right as in the overscan \function\b
 
■ Scree\f	Mode	(16:9	/	Wide	Zoom	/	Zoom	/	4:3): 
Available only when \ypicture size is set to Auto	Wide\b You 
can determine the d\yesired picture size at the 4:3 \yWSS 
(Wide Screen Service) size o\yr the original siz\ye\b Each 
European country requires di\f\ferent picture size\b
 
✎Not available in PC, Component or HDMI mode\b
P.SIZE
Picture Options
Colour Tone  : Normal   ►
Size  : Auto Wide
Screen Mode  : 16:9
Digital Noise Filter  : Auto
MPEG Noise Filter   : Auto
HDMI Black Level  : Normal
Film Mode  : Off
▼
U Move  E Enter  R Return
[UC8000]BN68-02697D-Eng.indb   172010-04-02   오후 7:54:55 
						

							18English
Basic Features
 
■ Digita\b	Noise	Fi\bter	(Off	/	Low	/	Medium	/	High	/	Auto	
/	Auto	Visua\bisatio\f): When the broadcast signal is 
weak, some static \yand ghosting may ap\ypear\b Select one 
o\f the options unti\yl the best picture is displayed\b
Auto	Visua\bisatio\f: When changing an\yalogue channels, 
displays the intens\yity o\f the current signal and defin\yes 
the screen noise filter\b
 
✎Only available \for analogue channels\b
 
■ MPEG	Noise	Fi\bter	(Off	/	Low	/	Medium	/	High	/	
Auto): Reduces MPEG noise\y to provide improved 
picture quality\b
 
■ HDMI	B\back	Leve\b	(Norma\b	/	Low): Selects the black\y 
level on the screen to adjust the s\ycreen depth\b
 
✎Available only in HDMI mode (RGB signals)\b
 
■ Fi\bm	Mode	(Off	/	Auto1	/	Auto2): Sets the TV to 
automatically sense\y and process film signals \y\from all 
sources and adjust the \ypicture \for optimum quali\yty\b
 
✎Available in AV, COMPONENT (480i / 1080i) and 
HDMI (480i / 1080i)\b
 
■ Motio\f	P\bus	(Off	/	C\bear	/	Sta\fdard	/	Smooth	/	
Custom	/	Demo):	Removes drag \from \fast scenes with\y 
a lot o\f movement t\yo provide a clearer picture\b 
 
✎I\f noise occurs on the screen, please set up the 
Motio\f	P\bus to O\f\f\b I\f Motio\f	P\bus is Custom , 
you can set up the Blur Reduction, Judder	
Reductio\f or Reset manually\b
 
✎I\f Motio\f	P\bus is Demo , you can compare the 
di\f\ference o\f on and o\f\f modes\b 
B\bur	Reductio\f: Adjusts the blur \yreduction level \from 
video sources\b
Judder	Reductio\f: Adjusts the judder\y reduction level 
\from video sources when playing fil\yms\b
Reset: Reset the custom\y settings\b
 
■ Auto	Protectio\f	Time	(2	hours	/	4	hours	/	8	hours	
/	10	hours	/	Off): I\f the screen remains idle with a \ystill 
image \for a certain\y period o\f time defin\yed by the user, 
the screen saver is activ\yated to prevent the \formation\y o\f 
ghost images on th\ye screen
 
■ Smart	LED	(Off	/	Low	/	Sta\fdard	/	High	/	Demo): 
Controls LED backlight t\yo maximize picture clarity\b
Demo: Displays the di\f\ference between Smart \yLED on 
and o\f\f modes\b
	
¦ Viewi\fg	TV	usi\fg	the	3D	fu\fctio\f
IMPORTANT	SAFETY	INFORMATION.	READ	THE	
FOLLOWING	WARNINGS	BEFORE	YOU	OR	YOUR	
CHILD	USE	THE	3D	FUNCTION
[ WARING
 
xAs the T V turns on, the le\ft and right sides o\f 3D 
pictures may overlap more than usual\b It may take 
time until the picture quality is optimized\b
 
xThe 3D e\f\fect may be experienced di\f\ferently 
depending on the viewer\b You may not notice the 3D 
e\f\fect at all i\f you have a prescription \for one eye that 
is very di\f\ferent \from the other eye\b
 
xParents’ care\ful supervision is required particularly 
when children or teenagers view 3D images\b
 
xPhotosensitive Seizure Warning and Other Health 
Risks
 
– Some viewers may ex\yperience an epilep\ytic seizure 
or stroke when exposed to\y certain flashing i\ymages 
or lights containe\yd in certain televi\ysion pictures or 
video games\b I\f you \yor any o\f your relatives has a 
history o\f epilepsy \yor strokes, please consu\ylt with a 
medical specialist \ybe\fore using the 3D \func\ytion\b
 
– Do not watch 3D pi\yctures when you \feel 
incoherent, sleepy, tired or sick\b Avoid watching 3D 
pictures \for long hours\b
 
– Even those without \ya personal or \famil\yy history 
o\f epilepsy or stroke may have an und\yiagnosed 
condition that can \ycause “photosensit\yive epileptic 
seizures\b”
 
– I\f you experience a\yny o\f the \following \ysymptoms 
immediately stop wa\ytching 3D pictures and 
consult a medical s\ypecialist : (1)	a\btered	visio\f; (2)	
\bightheaded\fess; (3)	dizzi\fess; (4)	i\fvo\bu\ftary	
moveme\fts	such	as	eye	or	musc\be	twitchi\fg; 
(5)	co\ffusio\f; (6)	\fausea; (7)	\boss	of	aware\fess; 
(8)	co\fvu\bsio\fs; (9)	cramps; a\fd/or (10)	
disorie\ftatio\f\b Parents should monitor\y and ask 
their children about the above\y symptoms-children 
and teenagers may b\ye more likely than adult\ys to 
experience these s\yymptoms\b
 
xNote that watching T V while sitting too close to the 
screen \for an extended period o\f time may weaken 
your eyesight\b
 
xNote that watching T V while wearing 3D Active 
Glasses \for an extended period o\f time may cause a 
headache or \fatigue\b I\f you \feel headache, \fatigue or 
dizziness, stop watching T V and rest\b
 
xSome 3D pictures may startle view\yers\b The pregnant, 
elderly, epileptic \yand those su\f\fering \from serious 
physical conditions\y are advised to avoid u\ytilizing the 
unit’s 3D \functionality\b
 
xWe don’t recommend 3D pictures to those who are 
in bad physical condition, who are sleep-deprived or 
who drank liquor\b
[UC8000]BN68-02697D-Eng.indb   182010-04-02   오후 7:54:56 
						

							19English
03Basic	Features 
xPlease take care to be aware o\f the world around 
you\b This product is designed to be immersive\b  DO 
NOT use this product near open stairwells, cables, 
balconies, or other objects that can be tripped over, 
run into, knocked down, broken or \fallen over\b Being 
startled or deluding yoursel\f into thinking that the 3D 
images are real may cause you to crush a nearby 
object or get injured trying to move your body\b
 
xDo not use the 3D Active Glasses \for any other 
purpose than \for which it was designed\b Wearing the 
3D Active Glasses \for any other purpose (as general 
spectacles, sunglasses, protective goggles, etc\b) 
may physically harm you or weaken your eyesight\b
 
xImmersive video can potentially have adverse e\f\fects 
on the user including motion sickness, perceptual 
a\fter e\f\fects, disorientation, eye strain, and 
decreased postural stability\b Take \frequent breaks to 
lessen the potential o\f these e\f\fects, as is commonly 
suggested \for other items, such as keyboards and 
computer monitors, that you may tend to \fixate or 
concentrate on\b I\f your eyes show signs o\f \fatigue or 
dryness or i\f you have any o\f the above symptoms, 
immediately discontinue use o\f this device and do 
not resume using it \for at least thirty minutes a\fter 
the symptoms have subsided\b
 
xThe ideal viewing distance should be three times 
or more the height o\f the screen\b We recommend 
sitting with viewer’s eyes on a level with the screen\b
3D
This exciting new \y\feature enables you to 
view 3D content\b In\y order to \fully enjoy 
this \feature, you must purchase a pair 
o\f Samsung 3D Activ\ye Glasses (SSG-
2100AB, SSG-2200AR,\y SSG- 2200KR) to 
view 3D video\b
Samsung 3D Active G\ylasses are sold 
separately\b For mor\ye detailed purchasing 
in\formation, contac\yt the retailer where you purchased this TV\b
 
✎I\f there is any obstacle between the emitter and 3D 
Active Glasses, the proper 3D e\f\fect may not be 
obtained\b  
■ 3D	Mode: Select the 3D inp\yut \format\b 
 
✎I\f you want to \feel the 3D e\f\fect \fully, please wear 
the 3D Active Glasses \first, and then select 3D	
mode \from the list below that provides the best 
3D viewing experience\b
 
✎When watching 3D images, turn on 3D Active 
Glasses\b
3D	Mode Operatio\f
Off Turns the 3D \function \yo\f\f\b
2D → 3DChanges a 2D image\y to 3D\b
Side	by	SideDisplays two images\y next to 
each other\b
Top	&	BottomDisplays one image \yabove 
another\b
Li\fe	by	Li\feDisplays the images\y \for the le\ft 
and right eye alter\ynately in rows\b
Vertica\b	StripeDisplays the images\y \for the le\ft and 
right eye alternately in columns\b
Checker	
BoardDisplays the images\y \for the le\ft 
and right eye alter\ynately in pixels\b
Freque\fcyDisplays the images\y \for the le\ft 
and right eye alter\ynately in \frames\b
 
✎“Side by Side” and “Top & Bottom” are available 
when the resolution is 720p, 1080i and 1080p 
in DT V,	HDMI and USB mode or set to PC 
connecting through HDMI/DVI cable\b
 
✎“Vertical Strip”, “Line by Line” and “Checker 
Board” are available when the resolution is set to 
PC connecting through HDMI/DVI cable\b
 
✎“Frequency” displays the \frequency (60Hz only) 
when the resolution is set to PC\b
 
■ 3D	→	2D	(Off	/	O\f): Displays the imag\ye \for the le\ft eye 
only\b
 
✎This \function is deactivated when 3D	Mode set to 
“2D → 3D” or Off \b
 
■ 3D	View	poi\ft: The overall adjus\ytment o\f 3D 
perspective\b
 
✎This \function is deactivated when 3D	Mode is set 
to “2D → 3D” or Off \b
 
■ Depth: Adjusts \focus / de\ypth in “2D → 3D” mode\b
 
✎This \function is only activated when the 3D	Mode 
is “2D → 3D”\b
 
■ Picture	Correctio\f: Adjusts the image\ys \for the le\ft and 
right eye\b
 
■ 3D	Auto	View	(Off	/	O\f): I\f 3D	Auto	View is set to O\f, 
a “Side-By-Side” \form\yat HDMI signal wit\yh one o\f the 
resolutions below i\ys automatically swi\ytched to 3D\b Here, 
correct 3D in\formation \ymust be sent \from the HDMI 1\b3 
transmitter\b
 
✎I\f a 3D \failure occurs due to a 3D in\formation error, 
set 3D	Auto	View to Off and manually select a 
3D	Mode using the 3D button or corresponding 
menu\b
3D
3D emitter
[UC8000]BN68-02697D-Eng.indb   192010-04-02   오후 7:54:58 
						

							20English
Basic Features
 
✎Support resolution (16:9 only)
Reso\butio\f Freque\fcy	(Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 \yHz
Reso\butio\f	supported	for	HDMI	PC	mode
The resolution \for HDMI \yPC mode is optimize\yd to 1920 x 
1080 input\b 
An input resolution other th\yan 1920 x 1080 may \ynot be 
displayed properly in 3D displa\yy or \full screen mode\b
How	to	watch	the	3D	image
1.	 Press the CONTENT button, then the \yCo\fte\ft	View 
menu will appear\b
2.	 Press the ◄ or ► button, then sele\yct 3D\b
To watch in 3D, wea\yr 3D Active Glasse\ys and press the 
power button on th\ye glasses\b
3.	 Select OK, then press the ENTER
E button\b
4.	 Using the ◄ or ► buttons on your remote control, 
selects the 3D	Mode o\f the image you w\yant to view\b
 
✎Some 3D modes may not be available depending 
on the \format o\f the image source\b
Supported	formats	a\fd	operati\fg	specificatio\fs	for	HDMI	1.4
Source 	sig\fa\b 	format Sta\fdard	HDMI 	1.4 	3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automat\yically switched to \y3D mode \for the 3D \y
video input in one \yo\f the \formats abov\ye\b
For the HDMI 1\b4@24\yHz \format, the TV i\ys optimized as 
\follows:
 
– Reso\butio\f	First	Disp\bay	Mode: I\f Motio\f	P\bus is set 
to Off,	C\bear or Sta\fdard, you can watch the\y video 
at a high resolution optimize\yd to the resolution o\f the 
source video\b
 
– Judder	Reductio\f	Disp\bay	Mode: When	Motio\f	
P\bus is set to Smooth or Custom, you can watch a 
smooth picture without judder\b
Before	usi\fg	3D	fu\fctio\f...
 
✎NOTE
 
xYou may notice a small amount o\f screen \flickering 
when watching 3D images in poor light conditions 
(\from a strobe light, etc\b), or under a \fluorescent lamp 
(50Hz ~ 60Hz) or 3 wavelength lamp\b I\f so, dim the 
light or turn the lamp o\f\f\b
 
x3D mode is automatically disabled in \following cases: 
when changing a channel or the input source, or 
accessing Media	P\bay or I\fter\fet@T V \b
 
xSome Picture \functions are disabled in 3D mode\b
 
xPIP and data broadcast is not supported in 3D 
mode\b
 
xData broadcasts (MHEG / MHP) are not supported 
in 3D mode\b
 
x3D Active Glasses \from other manu\facturers may not 
be supported\b
 
xWhen the T V is initially powered on, may take some 
time until the 3D display is optimized\b
 
xThe 3D Active Glasses may not work properly i\f there 
is any other 3D product or electronic devices turned 
on near the glasses or T V\b I\f there is a problem, keep 
other electronic devices as \far away as possible \from 
the 3D Active Glasses\b
 
xWhen watching pictures \from a 50Hz 3D source with 
its Game mode On, visually-sensitive viewers may 
see some \flicker on bright images\b
 
xPhotos o\f Media	P\bay are shown in “2D → 3D” 
mode only\b
 
xI\f lying on your side, the 3D-e\f\fects may not be 
displayed\b
 
xBe sure to stay within the viewing angle and optimum 
T V viewing distance when watching 3D pictures\b
 
– Otherwise, you may \ynot be able to enj\yoy proper 3D 
e\f\fects\b
3D
OK
To watch in 3D, wear 3D glasses and 
press the power button on the glasses.
Viewing 3D TV motion pictures for long 
periods may cause eye fatigue and/or 
dizziness.
Cancel
U Move    E Enter    e Exit
3D3D
Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.
U Move    E Enter    e ExitU Move    E Enter    e Exit
[UC8000]BN68-02697D-Eng.indb   202010-04-02   오후 7:54:58