Samsung UE 40D5000 User Manual

							Engl\fsh - 11
Changing the Input\l Source
 ¦Source \b\fst
Use to select TV or\T other external input sources such as DVD / B\Tlu-ray players / ca\Tble box / \bTB satel\Tlite receiver connected to the TV.
 ■TV / Ext. / PC / AV / Component / HDM\oI1/DVI / HDMI2 / H\oDMI3 / HDMI4 / USB\o / AllShare
 ✎In the \bource List, connected inputs will be highlighted.
 ✎If you want to see connected devices only, move to Connected using ◄ or ► button.
 ✎Ext. and PC always stay activated.
 ✎If the connected ext\Ternal devices are not highlighted,\T press the red button. The TV w\Till search for connected devices.
How to use Ed\ft Name\o
In the \bource, press the TOO\bS button, and then \Tyou can set an exte\Trnal input sources name you want.
 ■VCR / DVD / Cable STB / Satell\fte STB / PVR STB / AV Rece\fver / Game / Camcorder / PC / DVI PC / DVI Dev\fces / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jac\fs to ma\fe your input source selection easier.
 ✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Ed\ft Name.
 ✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Ed\ft Name.
 ✎When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Dev\fces mode under Ed\ft Name.
Informat\fon
You can see detailed\T information about \Tthe selected external device.
 ✎For best cable connection to this product, be sure to use cables with a maximum thic\fness as below:
 xMaximum thickness - 0.55 inches (14mm)
Connecting to a CO\lMMON INTERFACE slot
Attach\fng the CI Ca\ord Adaptor
Attach the adapter \Tas shown in the ri\Tght.To connect the CI CA\TRD Adapter, follow these step\Ts.
 ✎Ma\fe sure that you attach the adaptor before you mount the T V on a wall.1.  Insert the CI CARD\T Adapter into the \Ttwo holes on the p\Troduct 1.
 ✎Please find the two holes on the rear of the T V. The two holes are beside the COMMON INTERFACE port.
 ✎Press it firmly at cen\Tter of adapter to e\Tnsure it is fully loc\f.
2.  Connect the CI CARD\T Adapter into the \TCOMMON INTERFACE port.
3.  Insert the “CI or \TCI+ CARD”.
Us\fng the “CI or CI\o+ CARD”
To watch paid channe\Tls, the “CI or CI+\T CARD” must be ins\Terted. yIf you do not inser\Tt the “CI or CI+ C\TARD,” some channels\T will display the \Tmessage “\bcrambled \T\bignal”. yThe pairing informa\Ttion containing a t\Telephone number, the “CI or CI+ C\TARD” ID the Host I\TD and other information will be\T displayed in abou\Tt 2~3 minutes. If a\Tn error message is disp\Tlayed, please conta\Tct your service provider. yWhen the configurati\Ton of channel inform\Tation has finished,\T the message “Upda\Tting Completed” is\T displayed, indicati\Tng the channel list\T is updated.
 ✎NOTE
 xYou must obtain a “CI or CI+ CARD” from a local cable service provider. 
 xWhen removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
 xInsert the “CI or CI+ CARD” in the direction mar\fed on the card.
 xThe location of the COMMON INTERFACE slot may be different depending on the model.
 x“CI or CI+ CARD” is not supported in some countries and regions; chec\f with your authorized dealer.
 xIf you have any problems, please contact a service provider.
 xInsert the “CI or \TCI+ CARD” that sup\Tports the current antenna settin\Tgs. The screen will be distor\Tted or will not be\T seen.
[UD5000-XU]BN68-03432J.indb   112011-05-17   �� 5:19:04  
						

							Engl\fsh - 12
Net\bork Connection
Network Connect\fon -\o W\freless
You can connect your \TTV to your LAN through a standard wireless router or modem. To connect wirelessly, you must \Tfirst attach a “\bamsung W\Tireless LAN Adapter” \T(WI\b09ABGN, WI\b09ABG\TN2, WI\b10ABGN - sold\T separately) to ei\Tther the U\bB 1 (HDD) or U\bB 2 port\T on the bac\f of your\T TV. \bee the illustrat\Tion below.
The LAN Port on the WallLAN CableWireless IP sharer
(wireless router having  DHCP server)
\bamsung Wireless
LAN Adapter
TV \bide Panel
\bamsung’s Wireless LAN adapter i\Ts sold separately \Tand is offered by select retailers and Ecomme\Trce sites. \bamsung’s Wireless LAN adapter s\Tupports the IEEE 8\T02.11a/b/g and n co\Tmmunication protocols. \bamsung recommends using IEE\TE 802.11n. When you \Tplay video over a \Tnetwor\f connection, \Tthe video may not \Tbe played smoothly\T.
Most wireless networ\f syste\Tms incorporate a se\Tcurity system that \Trequires devices that acce\Tss the networ\f through an access point or wireless router (typically a \Twireless IP \bharer) to transmit an\T encrypted security\T code called an acce\Tss \fey.
If Pure High-throughput (Greenfield) 802.11n m\Tode is selected and\T the Encryption typ\Te is set to WEP, TKIP or TKIP AE\b (WP\b2Mixed) for you\Tr wireless router, \bamsung TVs will \Tnot support a conne\Tction in compliance \Twith new Wi-Fi certification specifications.
Network Connect\fon -\o W\fred
There are two main ways to\T connect your TV to \Tyour networ\f using \Tcable, depending on\T your networ\f setup\T. They are illustrated below:\T
The Modem Port on the WallTV Rear Panel
LAN Cable
Modem Cable External Modem 
(AD\bL / VD\bL / Cabl\Te TV)
The LAN Port on the WallTV Rear Panel
LAN Cable
 ✎A networ\f speed of lower than 10 Mbps is not supported.
[UD5000-XU]BN68-03432J.indb   122011-05-17   �� 5:19:06  
						

							Engl\fsh - 13
How to v\few the e-Manual
Screen D\fsplay
145 6
2
3
Basic Features
Picture Menu
Sound Menu
} Index   E Enter   e Exit 
1	Currently displayed vi\Tdeo, TV Programme, etc.
2	The category list. \TPress ◄ or ► button to select category you want.
3	Displays the sub-m\Tenu list. Use the \Tarrow buttons on your remote to move the \Tcursor. Press ENTERE button to select t\The sub-menu you want.
4	} Blue (Index): Displays the in\Tdex screen.
5	E Enter: \belects a category\T or sub-menu.
6 e Ex\ft: Exit the e-Manual.
How to toggle betwee\on an e-Manual top\fc\o and the correspond\fng OSD menu(\os).
PictureP\fcture Mode  : Standard          ►
Backl\fght   : 7
Contrast   : 95
Br\fghtness   : 45
Sharpness   : 50
Colour   : 50
T\fnt (G/R)   : G50/R50
Screen Adjustment
E-MANUAL
a Try Now
Basic Features > Picture Menu (3/17)
a Try Now   b Home   { Zoom  } Index   L Page   e Exit 
 ✎This function is not enabled in some menus.
Method 1Method 2
1. If you want to use \Tthe menu that corresponds to an e-Manual topic, press the red button to select\T Try Now.
2. To return to the e-Manual screen, press the E-MANUA\b button.
1. Press the ENTERE button when a top\Tic is displayed. “Are you sure?” appears. \belect Yes, and then press the ENTERE button. The O\bD wi\Tndow appears.
2. To return to the e-Manual screen, press the E-MANUA\b button.
E-MANUALYou can find instruct\Tions about your TV’\Ts features in the e-Manual in your TV. To 
use, press the E-MANUA\b button on your remote. Move the cur\Tsor using the up/
down/right/left but\Ttons to highlight \Ta category, then a \Ttopic, and then press the 
ENTERE button. The e-Manual displays the page\T you want to see.
You can also access i\Tt through the menu:
 OMENUm → Support → e-Manual → ENTERE
 ✎To return to the e-Manual main menu, press the E-MANUA\b button on the remote.
 ✎You cannot use Tr y Now directly if the T V is set to an external input source. 
[UD5000-XU]BN68-03432J.indb   132011-05-17   �� 5:19:09   
						

							Engl\fsh - 14
V\few\fng the Contents
Basic Features > Picture Menu (3/17)
234 5
a Try Now   b Home   { Zoom  } Index   L Page   e Exit 
1
1	Contents Area: Contains the t\Topic contents, if yo\Tu selected a sub-menu\T. To move previous or next page, press the ◄ / ► button.
2	Try Now: Displays the O\bD \Tmenu that corresponds to the topic. To return to the e-Manual screen, press the E-MANUA\b button.
3	Home: Moves to the e-Manual home screen.
4	Zoom: Magnifies a screen. You can scroll through the magnified screen by using ▲ / ▼ buttons.
5	L (Page): Moves to previous or next pag\Te.
Us\fng the Zoom mode
U Move   R Return 
\belect the Zoom, and then press ENTERE to magnify the screen. You can scroll through the magnified \Tscreen by using the ▲ or ▼ buttons.
 ✎To return to the screen to normal size, press the RETURN  button.
How to search for a top\fc on th\oe \fndex page
 ✎This function may not be supported depending on the language.
1. If you want to sear\Tch a \feyword, press the blue butto\Tn to select Index.
2. Press the ◄ or ► button to select a\T character order you want.
3. Press the ▲ or ▼ button to select a\T \feyword you want to see,\T and then press the ENTERE button.
4. You can view the cor\Tresponding e-Manual\T instruction screen.
 ✎To close the Index screen, press the RETURN button.
[UD5000-XU]BN68-03432J.indb   142011-05-17   �� 5:19:12  
						

							Engl\fsh - 15
Installing the Wall Mount
The wall mount \fit \T(sold separately) \Tallows you to moun\Tt the TV on the wal\Tl.
For detailed inform\Tation on installin\Tg the wall mount, \Tsee the instruction\Ts provided with the wa\Tll mount. Contact a\T technician for assistance when ins\Ttalling the wall m\Tount brac\fet.
\bamsung Electronics is not responsible for any \Tdamage to the product or injury to \Tyourself or others \Tif you elect to ins\Ttall the TV on your own.
Wall Mount K\ft Spec\ffi\ocat\fons (VESA) 
Case A. Install\fng \othe SAMSUNG Wall-MountCase B. Install\fng \oanother company’s Wall-Mount
1111
 ✎Wall mount \fit is no\Tt supplied but sol\Td separately.
Install your wall \Tmount on a solid w\Tall perpendicular t\To the floor. When attaching to\T other building ma\Tterials, please con\Ttact your nearest dealer. If installed on a\T ceiling or slanted\T wall, it may fall \Tand result in severe personal injury.\T
 ✎NOTE
 x\btandard dimensions for wa\Tll mount \fits are shown in the tab\Tle below.
 xWhen purchasing our wall mo\Tunt \fit, a detailed\T installation manu\Tal and all parts n\Tecessary for assemb\Tly are provided.
 xDo not use screws that do not com\Tply with the VE\bA s\Ttandard screw specifications.
 xDo not use screws longer than th\Te standard dimension, as th\Tey may cause damage\T to the inside of t\The TV set.
 xFor wall mounts th\Tat do not comply wi\Tth the VE\bA standar\Td screw specifications, t\The length of the sc\Trews may differ depending on their\T specifications.
 xDo not fasten the s\Tcrews too strongly, this may da\Tmage the product or cause the \Tproduct to fall, lead\Ting to personal injury. \bamsung is \Tnot liable for thes\Te \finds of accidents\T.
 x\bamsung is not liab\Tle for product damage or per\Tsonal injury when \Ta non-VE\bA or non-s\Tpecified wall mount\T is used or the consumer fails \Tto follow the product installation \Tinstructions.
 xDo not exceed 15 de\Tgrees tilt when moun\Tting this TV.
Product Fam\fly\fnchesVESA Spec. (A * B)Standard ScrewQuant\fty
LED-TV
19~2275 X 75M4
4
27200 X 100
32~40200 X 200
M846~60400 X 400
65~75600 X 400
Do not install you\Tr Wall Mount Kit whil\Te your TV is turned on. It may result in personal \Tinjury due to elect\Tric shoc\f.
[UD5000-XU]BN68-03432J.indb   152011-05-17   �� 5:19:14  
						

							Engl\fsh - 16
Troubleshooting
If the TV seems to \Thave a problem, first try th\Tis list of possible\T problems and solutio\Tns. If none of thes\Te troubleshooting tips\T 
apply, visit “www.samsung.com”, then\T clic\f on \bupport, o\Tr call \bamsung custo\Tmer service centre.
IssuesSolut\fons and Explan\oat\fons
The TV will not turn on.• Ma\fe sure the AC power cord is securely plugged in to the wall outlet and the TV. • Ma\fe sure the wall outlet is wor\fing. • Try pressing the POWER button on the TV to ma\fe sure the problem is not the remote. If the TV turns on, refer to “Remote control does not wor\f” below.
There is no picture/video.• Chec\f cable connections (remove and reconnect all cables connected to the TV and external devices). • \bet your external device’s (Cable/\bet top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Ma\fe sure your connected devices are powered on. • Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. • Reboot the connected device by reconnecting the device’s power cable.
The remote control does not wor\f.• Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.
• Program the Cable/\bet top box remote control to operate the TV. Refer to the Cable/\bet user manual for the \bAM\bUNG TV code.
 ✎You can \feep your T V as optimum condition to upgrade the latest firmware on web site (samsung.com -> \bupport -> Downloads) by U\bB. 
 ✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dar\f pixels on the screen. These pixels will have no impact on the performance of the product.
Licence
List of Features
Excellent Digital I\Tnterface & Networ\fing\T: With a built-in HD \Tdigital tuner, nonsubscription H\TD broadcasts can be vie\Twed without a cable box / \bTB (\b\Tet-Top-Box) satellite \Treceiver.
My Downloads
Allows you to play\T music files, pictur\Tes, and movies sav\Ted on a U\bB device.\T
AllShare™
All\bhare™ connects your TV \Tand compatible \bams\Tung mobile phones/\Tdevices through a networ\f.
Anynet+(HDMI-CEC)
Allows you to contr\Tol all connected \bam\Tsung devices that s\Tupport Anynet+ wit\Th your \bamsung TV’s remote.
[UD5000-XU]BN68-03432J.indb   162011-05-17   �� 5:19:15  
						

							Engl\fsh - 17
Securing the TV to \lthe Wall
Caut\fon: Pulling, pushing\T, or climbing onto \Tthe TV may cause th\Te TV to fall. In pa\Trticular, ensure that your children do not hang ove\Tr or destabilize t\The TV; doing so may caus\Te the TV to tip ove\Tr, resulting in seriou\Ts injuries or death.\T Follow all safety \Tprecautions provided on the inclu\Tded \bafety Flyer. For added stabil\Tity, install the anti-fall devic\Te for safety purpos\Tes, as follows.
To avo\fd the TV from fall\fng 
1. Put the screws into the clamps\T and firmly fasten t\Them onto the wall. Confirm that \Tthe screws have been firml\Ty installed onto t\The wall. 
 ✎You may need additional material such as an anchor depending on the type of wall.
 ✎\bince the necessary \Tclamps, screws, and string ar\Te not supplied, please p\Turchase these additio\Tnally.
2. Remove the screws from the centre bac\f of the TV, put the screws into the clamps\T, and then fasten t\The screws onto the TV again.
 ✎\bcrews may not be supplied with the product. In this case, please purchase the screws of the following specifications.
 ✎\bcrew \bpecifications
 xFor a 32 ~ 75 inch \TLED TV: M8
3. Connect the clamps \Tfixed onto the TV an\Td the clamps fixed o\Tnto the wall with a st\Trong string and the\Tn tie the string t\Tightly.
 ✎NOTE
 xInstall the T V near to the wall so that it does not fall bac\fwards.
 xIt is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the T V.
 xUntie the string before moving the T V.
4. Verify all connection\Ts are properly secured. Periodically ch\Tec\f connections for a\Tny sign of fatigue \Tfor failure. If you have any \Tdoubt about the se\Tcurity of your conne\Tctions, contact a pr\Tofessional installe\Tr.
Storage and Mainte\lnance
 ✎If you remove the attached stic\fer on the T V screen, clean the residues and then watch T V.
Do not spray water\T or a cleaning agen\Tt directly onto the product. Any liquid t\That goes into the \Tproduct may cause a failure, fire, or electric shoc\f\T.
Clean the product with a soft cl\Toth dapped in a sm\Tall amount of water.
 
Wall
[UD5000-XU]BN68-03432J.indb   172011-05-17   �� 5:19:16  
						

							Engl\fsh - 18
Spec\fficat\fons
Display Resolution1920 x 1080
Environmental Considerations Operating Temperature Operating Humidity\btorage Temperature \btorage Humidity 
10°C to 40°C (50°F\T to 104°F) 10% to 80%, non-con\Tdensing -20°C to 45°C (-4°\TF to 113°F) 5% to 95%, non-cond\Tensing
TV \bystem Analogue: B/G, D/K\T, L, I (Depending \Ton your country sel\Tection) Digital: DVB-T/DVB-\TC
Colour/Video \bystemAnalogue: PAL, \bECAM, NT\bC-4.43,\T NT\bC-3.58, PAL60 Digital: MPEG-2 MP\T@ML, MPEG-4, H.264\T/AVC MP@L3, [email protected],\T [email protected]
\bound \bystemBG, DK, L, NICAM, M\TPEG1, DD, DD+, HEA\TAC
HDMI IN Video: 1080 24p, 10\T80p, 1080i, 720p, \T576p, 480p Audio: 2Ch Linear \TPCM 32/44.1/48\fHz, \T16/20/24bits. 
\btand \bwivel (Left / Right)-20˚ ~ 20˚
Model NameUE32D5000UE37D5000
\bcreen \bize32 inches37 inches
\bound (Output)10 W X 2
Dimensions (WxDxH) Body With stand762.0 X 29.9 X 462\T.0 (mm)762.0 X 242.2 X 53\T0.4 (mm)883.9 X 29.9 X 531\T.1 (mm)883.9 X 255.0 X 59\T8.5 (mm)
Weight Without \btand With \btand7.1 \fg10.2 \fg9.3 \fg12.5 \fg
Model NameUE40D5000UE46D5000
\bcreen \bize40 inches46 inches
\bound (Output)10 W X 2
Dimensions (WxDxH) Body With stand949.3 X 29.9 X 567\T.5 (mm)949.3 X 255.0 X 63\T5.2 (mm)1094.2 X 29.9 X 65\T2.5 (mm)1094.2 X 275.0 X 7\T11.1 (mm)
Weight Without \btand With \btand10.9 \fg14.2 \fg13.7 \fg17.2 \fg
 ✎Design and specifications are subject to change without prior notice.
 ✎For information about power supply, and more about power consumption, refer to the label attached to the product.
[UD5000-XU]BN68-03432J.indb   182011-05-17   �� 5:19:17  
						

							•  
The slots and openings in the cabinet and in the bac\f or bottom are provided for necessary ventilation.  To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be bloc\fed or covered.
  -  Do not cover the slots and openings with a cloth or other materials. -  Do not bloc\f the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. -    Do not place this apparatus in a confined space, such as a boo\fcase, or built-in cabinet, unless proper ventilation is provided. -  Give your product 10 cm (4 inch)\T clearance from the wall.• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.•  
Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.• Do not place a water containing vessel on this apparatus, as this can result in a ris\f of fire  or electric shoc\f.•  
Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, \fitchen sin\f, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Ma\fe sure to pull out the power cord from the outlet before cleaning.•  
This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries  properly under environmental considerations. Please contact your local authorities for disposal or recycling information.•  
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shoc\f.•  
Power-supply cords should be routed so that they are not li\fely to be wal\fed on or pinched by items placed upon or against them,  paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.•  
To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.  This will prevent damage to the set due to lightning and power line surges.•  
Before connecting the AC power cord to the DC adaptor outlet, ma\fe sure the voltage designation of the DC adaptor corresponds to the local electrical supply.•  
Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shoc\f.•  
To avoid electric shoc\f, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.•  
Ma\fe sure to plug the power cord in until it is firmly inserted. When removing the power cord, ma\fe sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it  - unplug it immediately and contact an authorized dealer or service center.•  
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).    -    Accumulated dust can cause an electric shoc\f, an electric lea\fage or a fire by causing the power cord to generate spar\fs and heat or the insulation to deteriorate.•  
Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.• Use only a properly grounded plug and receptacle.   -  An improper ground may cause electric shoc\f or equipment damage. (Class l Equipment only.)•  To disconnect the ap\Tparatus from the mains, the \Tplug must be pulle\Td out from the mains soc\fet\T, therefore the mains plug s\Thall be readily operable.• Do not allow chil\Tdren to hang onto th\Te product.• \btore the accessories (\Tbattery, etc.) in a\T location safely ou\Tt of the reach of children.•  Do not install the\T product in an unstabl\Te location such as \Ta sha\fy self, a sla\Tnted floor or a loc\Tation exposed to v\Tibration.•  Do not drop or impart any s\Thoc\f to the product. If the product is damaged, d\Tisconnect the power\T cord and contact a ser\Tvice center.
 
   
WARNING - TO PREVENT THE SPREAD OF FIRE, 
KEEP CANDLES OR OTHER OPEN FLAMES AWAY 
FROM THIS PRODUCT AT ALL TIMES.
Please read the appropr\fate sect\fon that\o corresponds to the mark\o\fng on your Samsung \oproduct before attempt\fng to \fnst\oall the product.
Warn\fng! Important Saf\oety Instruct\fons
CAUTION
 CAUTION: TO REDUCE TH\TE RI\bK OF ELECTRIC \T\bHOCK, DO NOT REMOVE COVER (OR\T BACK). THERE ARE NO\T U\bER \bERVICEABLE PART\b IN\bIDE. REFER ALL \T\bERVICING TO QUALIFIED PER\bONNEL.\T
RISK OF E\bECTRIC SHOCK DO NOT OPEN
This symbol indicat\Tes that high volta\Tge is  present inside. It i\Ts dangerous to ma\fe any \find of contact with\T any internal part of this product.
This symbol alerts \Tyou that important\T litera-ture  concerning operation and\T maintenance has been included w\Tith this product.
[UD5000-XU]BN68-03432J.indb   192011-05-17   �� 5:19:18 
						

							Wiring the Mains P\lo\ber Supply Plug (UK\l Only)
IMPORTANT NOTICEThe mains lead on t\This equipment is s\Tupplied with a mou\Tlded plug incorpora\Tting a fuse. The va\Tlue of the fuse is \Tindicated on the pin face of the \Tplug and, if it requires replacing, a fuse ap\Tproved to B\bI1362 of \Tthe same rating mu\Tst be used.
Never use the plug \Twith the fuse cover\T omitted if the cov\Ter is detachable. I\Tf a replacement fuse cove\Tr is required, it must be of the same colour as \Tthe pin face of the \Tplug. Replacement c\Tovers are available from your dealer.
If the fitted plug i\Ts not suitable for \Tthe power points i\Tn your house or th\Te cable is not long\T enough to reach a power point,\T you should obtain a su\Titably approved extension lea\Td or consult your d\Tealer for assistanc\Te. However, if there is no alternative but to cut off the plug, remove the fuse and \Tthen safely dispose\T of the plug.
Do NOT connect the pl\Tug to a mains soc\fe\Tt as there is a ris\f of shoc\f\T hazard from the bared flexible cord.
IMPORTANTThe wires in the mains le\Tad are coloured in accordance with the foll\Towing code:
BLUE - NEUTRAL BROWN\T - LIVE
As these colours ma\Ty not correspond to the colou\Tred mar\fings identif\Tying the terminals\T in your plug, proceed as follows : \TThe wire coloured BLUE must be con\Tnected to the termi\Tnal mar\fed with the\T letter N or coloured BLUE or BLACK. \TThe wire coloured BROWN must be con\Tnected to the termi\Tnal mar\fed with the\T letter L or colour\Ted BROWN or RED.
WARNING:DO NOT CONNECT EITHER \TWIRE TO THE EARTH TERMINAL, WHICH I\T\b MARKED WITH THE LETTER E OR BY THE E\TARTH \bYMBOL , OR COLO\TURED GREEN OR GREEN \TAND YELLOW.
Warranty Card
This \bamsung product is warranted \Tfor a period of twe\Tlve (12) months from the original da\Tte of purchase, against defe\Tctive materials and wor\fm\Tanship. In the eve\Tnt that warranty s\Tervice is required, you should return the product to the retailer from whom it was purchased. However, \bamsung Authorise\Td Dealers and Auth\Torised \bervice Cent\Tres in other EC Cou\Tntries will comply with the war\Tranty on the terms\T issued to purchasers in the coun\Ttry concerned. In case of difficulty, details of \Tour Authorised \bervice \TCentres are available from:
Samsung Customer Su\opport Centre, PO Box 479, Gatesh\oead, NE9 9BJ Un\fted\o K\fngdomTelephone: 0330 SAMS\oUNG (7267864) Fax: \o0330 7260001 (UK &\o Northern Ireland)Tel: 0818 717 100 F\oax: +44 (0)117 915\o 6736 (EIRE Only)Web : www.samsung.com
WARRANTY CONDITIONS\o
1. The warranty is onl\Ty valid if, when wa\Trranty service is r\Tequired, the warranty ca\Trd is fully and properly completed an\Td is presented with the o\Triginal invoice or \Tsales slip or confir\Tmation, and the se\Trial number on the\T product has not been \Tdefaced.
2. \bamsung’s obligations are limited to the r\Tepair or, at its discretion, replacement of the p\Troduct or the defecti\Tve part.
3. Warranty repairs must be carr\Tied out by Authori\Tsed \bamsung Dealers\T or Authorised \berv\Tice Centres. No re-imbursement will be made for repairs carried out \Tby non \bamsung Deal\Ters and, any such r\Tepair wor\f and dama\Tge to the products caused by such repair wor\f will not\T be covered by this warrant\Ty.
4. This product is not consid\Tered to be defective \Tin materials nor w\Tor\fmanship by reason that it requires adaptation in order to conform to n\Tational or local te\Tchnical or safety st\Tandards in force in any country o\Tther than the one \Tfor which the product was originall\Ty designed and man\Tufactured.
UNITED KINGDOMREPUBLIC OF IRELAND\l(EIRE)
[UD5000-XU]BN68-03432J.indb   202011-05-17   �� 5:19:18