Samsung UE 37D6530 User Manual

◀▶
English
 
●Audio Format 
(digital channels only) 
When sound is emitted from both the main speaker and the audio receiver, 
a sound echo may occur due to the decoding speed difference between the 
main speaker and the audio receiver. In this case, use the TV Speaker function.
 
NAudio Format option may differ depending on the broadcast. 5.1ch Dolby 
digital sound is only available when connecting an external speaker through 
an optical cable. But it is also available through the ARC feature.
  

◀◀▶
English
 
●Audio Description 
(not available in all locations) (digital channels only) 
This function handles the Audio Stream for the AD (Audio Description) which is 
sent along with the Main audio from the broadcaster. 
 
NAudio Description (Off  / On): Turn the audio description function on or off.
 
NVolume: Adjust the audio description volume.
  

◀▶
English
 
■
Additional Setting
(digital channels only)
 
●DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the 
disparity of a voice signal (which is one of the signals received during a digital 
TV broadcast) to a desired level.
 
NAccording to the type of broadcast signal, MPEG / HE-AAC can be 
adjusted between -10dB and 0dB. 
 
NTo increase or decrease the volume, adjust between the range 0 and -10 
respectively.
  

◀◀▶
English
 
●SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital 
sound, reducing interference going to speakers and various digital devices such 
as a DVD player.
 
●Audio Format: During the reception of a digital TV broadcast, you can 
select the Digital Audio output (SPDIF) format from the options PCM or 
Dolby Digital.
 
●Audio Delay: Correct audio-video sync problems, when watching TV or 
video, and when listening to digital audio output using an external device 
such...

◀▶
English
 
●Dolby Digital Comp (Line / RF): This function minimizes signal disparity 
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-\
AAC, 
ATV Sound).
 
NSelect Line to obtain dynamic sound, and RF to reduce the difference 
between loud and soft sounds at night time.
 
●Line: Set the output level for signals greater or less than -31dB (reference) 
to either -20dB or -31dB.
 
●RF: Set the output level for signals greater or less than -20dB (reference) to 
either -10dB or -20dB.
  

◀◀▶
English
 
■
Speaker Settings
 
●Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between 
the main speaker and the audio receiver. In this case, set the TV to External 
Speaker.
 
NWhen Speaker Select is set to External Speaker, the volume and MUTE 
buttons will not operate and the sound settings will be limited. 
 
NWhen Speaker Select is set to External Speaker.
 
●TV Speaker: Off , External Speaker: On
 
NWhen Speaker Select is set to TV...

◀▶
English
 
●Auto Volume (Off  / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to 
Normal mode, making almost no noise. It is useful at night.
 
■
Reset Sound (Ye s  / No)
Reset all sound settings to the factory defaults.
  

◀▶
English
 
❑
Setting the network
 
■
Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
 
●You can attach your TV to your LAN by connecting the LAN port on the back\
 of 
your TV to an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
TV Rear Panel
LAN Cable
Modem Cable External Modem  
(ADSL / VDSL / Cable TV)
Preference
  

◀▶
English
 
●You can attach your TV to your LAN by connecting the LAN port on the back\
 
of your TV to a IP Sharer which is connected to an external modem. Use LAN 
cable for the connection. See the diagram below.
The Modem Port 
on the Wall TV Rear Panel
LAN Cable LAN Cable
Modem Cable External Modem  
(ADSL / VDSL / Cable TV) IP Sharer  
(having DHCP server)
  

◀▶
English
 
●Depending on how your network is configured, you may be able to attach your 
TV to your LAN by connecting the LAN port on the back of your TV directly to 
a network wall outlet using a LAN cable. See the diagram below. Note that the 
wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall TV Rear Panel
LAN Cable