Samsung Ud55ep Manual

161
Screen issue
The screen display does not look normal.Encoded video content may cause the display to appear corrupted in scenes featuring fast moving 
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean 
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analog and digital products.
The brightness and color do not look normal.Go to Picture and adjust the...

162
Sound issue
The volume is too low.Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound 
card or software program.
Video is available but there is no sound.If an HDMI cable is connected, check the audio output settings on the PC.
If a source device is used
 •Make sure the audio cable is properly connected to the audio input port on the product.
 •Check the audio output settings for the source device.
(For example, if an HDMI cable...

163
Remote control issue
The remote control does not work.Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.If a beeping sound is heard when your PC is booting, have your PC serviced.  

164
Other issue
The product smells like plastic.The plastic smell is normal and disappears over time.
The monitor appears tilted.Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it 
is recommended to use right-angle cables.
Small...

165
Other issue
The IR sensor is not functioning.Make sure the sensor light turns on when a button is pressed on the remote control.
 •If the sensor light does not turn on, turn the power switch off and then on again on the back of 
the product.
If the sensor light still does not turn on after the power switch is turned off and then on again, an 
internal jack may be disconnected.
Contact your nearest service center to have the product serviced.
In power-saving mode, when the input source is  Display Po...

166
Q & A
QuestionAnswer
How can I change the frequency?Set the frequency on your graphics card.
 •
Windows XP: Go to Control Panel  → Appearance and Themes 
→ Display 
→ Settings 
→ 
Advanced  → Monitor and adjust the frequency in Monitor Settings.
 •
Windows ME/2000: Go to Control Panel  → Display 
→ Settings 
→ Advanced 
→ Monitor and 
adjust the frequency in Monitor Settings.
 • Windows Vista: Go to Control Panel  → Appearance and Personalization 
→ Personalize 
→ 
Display Settings  → Advanced...

167
QuestionAnswer
How do I set powersaving mode? •
Windows XP: Set power-saving mode in Control Panel  → Appearance and Themes 
→ Display 
→  Screen Saver Settings or BIOS SETUP on the PC.
 •
Windows ME/2000: Set power-saving mode in Control Panel  → Display 
→  
Screen Saver Settings or BIOS SETUP on the PC.
 • Windows Vista: Set power-saving mode in Control Panel  → Appearance and Personalization 
→  Personalize 
→ Screen Saver Settings or BIOS SETUP on the PC.
 •
Windows 7: Set power-saving mode in...

168
Specifications
 -Size
 -Display area
H
V
 -Dimensions ( W x H x D)
W
D
H
General
Model Name UD55E-P / UD55E-S
PanelSize55 CLASS (54.6 Inches / 138 cm)
Display area1209.6 mm (H) x 680.4 mm ( V )
47.6 inches (H) x 26.8 inches ( V )
Dimensions (W x H x D)1213.5 x 684.3 x 96.6 mm
47.8 x 26.9 x 3.8 inches
Weight (without stand)23.3 kg / 51.4 Ibs
Power SupplyAC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries....

169
 ―Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor 
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
 ― Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect 
product performance.
 ― This device is...

170
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used 
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-
savign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaverNormal Operation Power saving mode
(SOG Signal : Not...