Samsung Ud46e-p Manual

11
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or 
modify the product yourself.
 •A fire or electric shock may result.
 •
Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect the 
power cable and all other connected cables.
 •Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke, 
disconnect the power cord immediately...

12
!
Do not use or keep combustible spray or an inflammable substance near 
the product.
 •An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
 •An increased internal temperature may cause a fire.
100Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects 
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
 •
Be sure to power off the product and disconnect the power cord 
when water or other...

13
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
 •Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an 
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
 •Your hand or finger may get stuck and injured.
 •Tilting the product at an excessive angle may cause the product to fall 
and an injury may result.
Do not...

14
Precautions when handling the panel
Do not stand the product as shown in the image. The panel is fragile and 
can get damaged.
!
Lay the product down to handle it as shown in the image. (the packaging 
can be used).
!
Ensure you use the handles on the back when moving the product.
15 mmDo not hold or grasp any area of the product within 15 mm from the front.    

15
 -Contact the vendor where you 
purchased the product if any 
components are missing.
 - The pictures may look different from the 
actual components.
 -A stand is not provided with the product. 
To install a stand, you can purchase one 
separately.
Checking the Components
Components
 ―
Components may differ in different locations.
Quick Setup GuideWarranty card
(Not available in some locations) Regulatory guide
Power cord




Batteries
(Not available in some locations) Remote Control
DP...

16
Parts
External sensor KIT
POWER
 ―The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a 
wall, you can move the External sensor KIT to the side of the display.
 ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to 
improve quality.
Buttons Description
Remote Control SensorAim the remote control towards this spot on the LCD Display.
 ―
Keep the area between the remote...

17
Reverse Side
 ―The colour and shape of parts may differ from what is shown. Specifications are 
subject to change without notice to improve quality.
IR
 OUT
CONTROL IN
DP IN
HDMI IN 1
HDMI IN 2
DVI IN
(MAGIC INFO)
AV / COMPONENT
AUDIO
OUT
IN
RS232C OUTRS232C OUTRS232C OUTRS232C OUTRS232C IN
RS232C OUT
RGB IN
RJ45USB
DP OUT
(LOOPOUT)
Port Description
RS232C INConnects to MDC using an RS232C cable.
RS232C OUT
IR OUT
Receives the remote control signal via the external sensor board and outputs the 
signal...

18
 -Remote control button functions may 
differ for different products.
Remote Control
 ―
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
 ―A button without a description in the image below is not supported on the product.
HOMEMENU
POWER
OFF
VOL
 MagicInfoPlayer I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
Power off the product.
Number buttons
Enter the password in the...

19
TOOLSINFO
SETUNSETLOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input 
source.
Move to the upper, lower, left or right menu, or 
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from 
PC, DVI , HDMI1, HDMI2 or DisplayPort.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.It sets safe lock function.
If multiple products are...

20
Connection Using an IR Stereo Cable (sold 
separately)
Make sure to connect the External ambient sensor while the product is powered 
off. Then, power on the product.
Controlling more than one display product using 
your remote control
 •Connect the IR OUT port on the product to the CONTROL IN port on the 
other display product using the dedicated stereo cable.
 •A command sent from the remote control pointed at product 1 will be 
received by both display products 
1 and 2.
 ― The appearance may...