Samsung TFT LCD Television LN-T3242H User Manual

English - 
Connecting a dVd player/Set-top Box
The	rear	panel	jacks	on	your	TV	make	it	easy	to	connect	a	DVD	player	to	your	 TV.
.  Connect	 a	Component	
	
	 	 Cable	 between	the		
	 	 COMPONENT 	IN(1	 or	2)		
	 	 [Y,	 PB,	PR]	jacks	 on	the	 TV		
	 	 and	 the	COMPONENT 		
	 	 [Y,	 PB,	PR]		 jacks	 on	the		
	 	 DVD/Set-Top	 Box.
.  Connect	 Audio	Cables
	
	 	 between	 the	COMPONENT	
	 	 IN(1	 or	2)	[R-AUDIO-L]		
	 	 jacks	 on	the	 TV	and	 the		 	
	 	 AUDIO	 OUT	jacks	 on	the...

English - 0
Connecting a dVd player/Set-top Box via hdmI
This	connection	can	only	be	made	if	there	is	an	HDMI	Output	connector	on	the	external	device.
.  Connect	 an	HDMI	 Cable	
	
	 	 between	 the	HDMI	 IN		
	 	 (1,2	 or	3)	connector	 on	the	 TV		
	 	 and	 the	HDMI	 connector	 on	the		
	 	 DVD	 player/Set-Top	 Box.	
dVd player rear panel
tV rear panel
hdmI Cable (not supplied)
What	 is	HDMI?			
•	 HDMI(High-Definition	 Multimedia	Interface),	is	an	 interface	 that		
	 enables	 the...

Connecting an Amplifier/DVD Home Theater
. Connect	 Audio	Cables		
	 	 between	 the	AUDIO	 OUT		
	 	 [R-AUDIO-L]	 on	the	 TV		
	 	 and	 AUDIO	IN	[R-AUDIO-	
	 	 L]	 on	the	 Amplifier/DVD		
	 	 Home	 Theater.
	 	 When	 an	audio	 amplifier	 is	
	
	 	 connected	 to	the	 "AUDIO		
	 	 OUT 	[L-AUDIO-R]"		
	 	 terminals:	 Decrease	the			 	volume	of	 the	 TV,		
	 	 and	 adjust	the	volume	 level		
	 	 with	 the	Amplifier’s	 volume			 	 control.
Amplifier/DVD Home Theater tV rear panel
audio Cable...

English - 
plug & play feature
When	the	TV	is	initially	powered	on,	basic	settings	proceed	automatically	and	subsequently:
. Press	 the	powEr 	button	 on	the	 remote	 control.	
	 	 The	 message	 “Menu	language,	 Shop	Mode,	 Channels	 and	Time	 will	be	set.”	 is		 	
	 	 displayed.	
	 	 Press	 the	EntEr 	button,	 then	“Select	 the	language	 of	the	 OSD”	 menu	 is			 	
	 	 automatically	 displayed.
.
	 Press	 the	▲	or	▼	 buttons	 to	select	 language,	 then	press	 the	EntEr 	button....

English - 
. Press	 the	▲	or	▼	 buttons	 to	select	 “Off”	or	“On”,	 then	the	EntEr 	button.		 	The	 message	“Select	 the	time	 zone	 in	which	 you	live.”	 is	displayed.
.  Press	 the	▲	or	▼	 buttons	 to	highlight	 the	time	 zone	 for	your	 local	 area.				
	 	 Press	 the	EntEr 	button.	 If	you	 have	 received	 a	digital	 signal,	 the	time	 will	be	set	 	
	 	 automatically.	
	 	 If	 not,	see	page	 47	to	set	 the	 clock.
.  The	 message	 “Enjoy	your	watching.”	 is	displayed....

English - 
adjusting the Volume
. Press	 the	Vol	or	
Vol	buttons	 to	decrease	 or	increase	 the	volume.	
using mute
At	any	time,	you	can	cut	off	the	sound	using	the	 mutE	button.
.  Press	 mutE  button	and	the	sound	 cuts	off.	
	
	 	 The	 word	"														 "	will	 appear	 in	the	 lower-left	 corner	of	the	 screen.
.  To	turn	 mute	 off,	press	 the	mutE  button	again,	or	simply	 press	the	
		 	Vol	or	
Vol	buttons.
Viewing the display
.  Press	 the	Info  button	 on...

English - 
Viewing the menus
. With	 the	power	 on,	press	 the	mEnu button.	
	 	 The	 main	menu	 appears	 on	the	 screen.	The	 menu’ 	s	left	 side	 has	five	icons:	 	
	 	 Picture,	 Sound,	Channel,	 Setup,	Input.
.  Use	 the	▲	or	▼	 buttons	 to	select	 one	of	the	 five	 icons.	
	
	 	 Then	 press	the	EntEr
 button	
to	access	 the	icon’s	 sub-menu.
.  Press	 the	ExIt  button	 to	exit.
	
The	 on-screen	 menus	disappear	 from	the	screen	 after	about	one	minute.
InputSource list  : tV...

English - 6
Storing Channels in memory (automatic method)
.  Press	 the	mEnu 	button	 to	display	 the	menu.
	
	 	 Press	 the	▲	or	▼	 buttons	 to	select	 “Channel”,	 then	press	 the	EntEr 	button.	
.  Press 	the 	▲	 or	▼	 buttons 	to 	select 	"Auto 	Program", 	then 	press 	the 	E nt Er
 button.
.  Press	 the	▲	or	▼	 buttons	 to	select	 the	antenna	 connection,	 then	press	 the	
		 	EntEr 	button.
	 	Air:	 “Air”	 antenna	 signal.	/	Cable:	 “Cable”	 antenna	 signal.	/...

English - 
after the television has been set up properly, your remote control can operate in five 
different modes: tV, dVd, Cable, Set-t op Box, VCr. pressing the corresponding button 
on the remote control allows you to switch between these modes, and control  whichever piece of equipment you choose.
The	remote	 control	might	not	be	compatible	 with	all	DVD	 Players,	 VCRs,	Cable	boxes,	 and	
Set-Top	 Boxes.
Setting  up the remote to  operate your VCr
. 	 	 Turn	 off	your	 VCR.		
....

English - 
Setting up the remote to  operate your  dVd
. 	 	
Turn	 off	your	 DVD.
. 	 Press	 the	dVd 	button	 on	your	 TV’s	 remote	 control.
. 	 Press	 the	SEt 	button	 on	your	 TV’s	 remote	 control.
. 	 	
Using	 the	number	 buttons	on	your	 remote	 control,	 enter	three	digits	 of	the	 DVD	 code	
listed	 on	page	
20~21	of	 this	 manual	 for	your	 brand	 of	DVD.		
Make	 sure	you	enter	 three	digits	 of	the	 code,	 even	if	the	 first	 digit	 is	a	“0”.	
(If	 there	 is	more...