Samsung TFT LCD Television LN-S4092D User Manual

Owner’\b
In\btru\ftion\b
This de\bice is a C\fass B digita\f apparatus.
Register your product at
www.samsung.com/g\foba\f/r\Begister
LN-S40\b2D
LN-S46\b2D
\fF\f-LCD \fELEVISION
BN68-01001B-01
Contact \bAM\bU\fG WORLD-WIDE
If you ha\be any questions or comments re\fating to Samsung products, p\fease contact the SAMSUNG 
customer care center.
Comment contacter \bamsung dans le monde
Si \bous a\bez des suggestions ou des questions concernant \fes produits Samsung, \beui\f\fez contacter \fe Ser\bice...

Precautions When Displaying a Still Image 
A still image may cause permanent damage to the TV screen.• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. 
This image retention is also known as "screen burn".  
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,...

English
Symbol Press Important Note One-Touch
Button
Contents
GENERAL INFORMATION
List of Features ...................................................\................................ 2
Accessories ...................................................\...................................... 2
Viewing the Control Panel...................................................\................ 3
Viewing the Connection Panel ...................................................\......... 4
Remote Control...

English-2
List of Features
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
V-
Chip function.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner,  non-subscription HD broadcasts can be viewed with no Set-Top Box needed.
Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.
Excellent Picture Quality
- 
DNIe...

English-3
Viewing the Control Panel 
SOURCE Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component, PC, 
HDMI1, HDMI2). 
In the on-screen menu, use this button as you would
use the 
ENTER button on the remote control.
MENUPress to see an on-screen menu of your TV’s features.
Press to increase or decrease the volume.
In the on-screen menu, use the  buttons as you
would use the 
and buttons on the remote control.
Press to change channels.  
In the on-screen menu, use...

English-4
AV IN 1Video and audio inputs for external devices, such as a 
camcorder or VCR.
S-VIDEO IN 1Connect an S-Video signal from a camcorder or VCR.
AUDIO OUT (L/R)Connect to the audio input jacks on your Amplifier/
Home theater.
DIGITAL AUDIO OUT (OPTICAL)Connect to a Digital Audio component.
SERVICE 1/SERVICE 2Connector for service only.
HDMI/DVI IN 1,2/DVI IN (AUDIO L/R)Connect to the HDMI jack of a device with an HDMI output.
Use the HDMI/DVI terminal for DVI connection to an external 
device....

English-5
AV IN 2Video and audio inputs for external devices.
S-VIDEO IN 2Video inputs for external devices with an S-Video output.
HEADPHONEConnect a set of external headphones for private listening.
Side Panel Jacks
Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 10)
BN68-01001B-01Eng.qxd  3/7/06 1:13 AM  Page 5 

English-6
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. 
You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
POWERTurns the TV on and off.
NUMERIC BUTTONSPress to change the channel.
–Press to select additional channels
(digital and analog) being broadcast by
the same station. For example, to
select channel “54-3”, press “54”, then
press “
–” and “3”. 
CH...

English-7
1.Place the wires from the twin leads under the screws on a 300-75Ωadapter 
(not supplied). 
Use a screwdriver to tighten the screws.
2.Plug the adaptor into the ANT 2 IN (CABLE) terminal on the back of the TV.
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads”
below.
If your antenna has one lead that looks like this, see “Antennas with 75 
ΩRound Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”....

English-8
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled
channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
2.Connect this cable to a two-way splitter.
Splitter Incoming
cable
3.Connect an RF cable between an OUTPUT
terminal on the splitter and the IN terminal 
on the cable box.
Splitter
Cable Box Incoming...