Samsung Television UNES7550 User Manual

Controls the white balance in 10 point 
intervals by adjusting the red, green, 
and blue brightness.
 
NAvailable when the Picture Mode is 
set to Movie  and when the external 
input is set to all input.
 
NSome external devices may not 
support this function.
Interval : Select interval to adjust.
Red : Adjust the red level.
Green : Adjust the green level. 

Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to 
its default settings.
 
●Gamma
Adjusts the primary color intensity.
 
●Expert Pattern
Use the Expert Pattern function to 
calibrate the picture. If the OSD menu 
disappears or a menu other than the 
Picture menu is opened, the TV saves 
the calibration and the Expert Pattern  

screen disappears.
Off: Turns the Expert Pattern function 
o f f.
Pattern1: This test screen demonstrates 
the effect of the display settings on 
shades of grey and black.
Pattern2: This test screen demonstrates 
the effect of the display settings on 
colors.
 
NAfter selecting Pattern1 or Pattern2, 
you can adjust any of the advanced  

settings for desired effect.
 
NWhile the Expert Pattern is running, 
the TV does not output sound.
 
NOnly enabled in DTV, Component, 
and HDMI modes.
 
●xvYCC
Setting xvYCC on increases picture 
detail and enlarges the color space 
when you are watching movies input 
from an external device (e.g. BD/DVD 
player) connected to the TV’s HDMI or  

Component IN jacks.
 
NAvailable only when you set 
the Picture Mode to Movie  and 
the external input to HDMI or 
Component.
 
NSome external devices may not 
support this function.
 
●Motion Lighting
When on, the TV automatically 
adjusts the brightness of the screen in 
response to the brightness of the room.  

In bright light, the screen brightens. In 
dim light, the screen dims.
 
NOnly available in Standard  mode.
 
NThis feature is not supported in 3D 
mode.
 
NWhen you change the Backlight   
for LED TV 
 /  Cell Light  for PDP TV , 
Contrast  or Brightness, the TV sets 
the Motion Lighting to Off .
 
●Black Enhancer  for LED 7500, 8000 series 
Enhance picture depth by adjusting  

black color depth.
 
NAvailable only when Picture Mode is 
set to Movie .
Picture Options
Menu  → Picture 
→ Picture Options
Using this function, you can configure 
additional picture settings to suit your 
preference.
 
NWhen your TV is connected to a PC 
via the HDMI to DVI cable, you can 
only make changes to  Color Tone. 

 
●Color Tone
Cool makes the picture bluer (cooler). 
Warm1 and  Warm2 make the picture 
redder (warmer).
 
NWarm1 and  Warm2 are deactivated 
when the Picture Mode is set to 
Dynamic.
 
NYou can adjust and store settings for 
each external device connected to an 
input on the TV.
 
●Digital Noise Filter 

If the broadcast signal received by your 
TV is weak, you can activate the Digital 
Noise Filter feature to reduce any static 
and ghosting that may appear on the 
screen.
Auto Visualization: When changing 
analog channels, displays signal 
strength.
 
NWhen the signal is weak, try all the 
options until the TV displays the best 
picture. 

 
NOnly available for analog channels.
 
NWhen the bar is green, you are 
receiving the best possible signal.
 
●MPEG Noise Filter
Reduces MPEG noise to provide 
improved picture quality.
 
●HDMI Black Level
Lets you adjust the screen depth by 
selecting a black level.
 
NAvailable only in HDMI mode.
 
●Film Mode