Samsung Television UNES7550 User Manual

registration code, you can download 
the VOD activation file. Once you play 
it using AllShare Play , the registration 
is completed. 
 
NFor more information on DivX(R) 
VOD, visit http://vod.divx.com. 

Support Menue-Manual
Menu  → Support 
→ e-Manual
The e-Manual is built into your TV. 
Open the e-Manual to learn how to use 
your TV’s many features.
 
NFor the detailed information about 
the e-Manual Screen, refer to “How 
to view the e-Manual” in the User's 
Manual.
Self Diagnosis 

Menu → Support 
→ Self Diagnosis
 
●Picture Test
Use to check for picture problems. 
Picture Test displays a high definition 
picture that you can examine for flaws 
or faults.
Ye s : Select Ye s  if the test picture 
does not appear or there is noise or 
distortion in the test picture. There 
may be a problem with the TV. Contact 
Samsung’s Call Center for assistance. 

No: Select No  if the test picture 
displays properly. There may be a 
problem with your external equipment. 
Please check your connections. If the 
problem persists, refer to the external 
device’s user manual.
 
●Sound Test
Use the built-in melody to check for 
sound problems.
 
NIf you hear no sound from the TV’
s speakers, before performing the  

sound test, make sure Speaker Select 
is set to TV Speaker in the Sound  
menu, and then try the speakers 
again.
 
NYou will hear the melody during the 
test even if you have set Speaker 
Select  to External Speaker or have 
muted the sound.
Ye s : Select Ye s  if you can hear sound 
from only one speaker or from neither 
speaker during the sound test. There  

may be a problem with the TV. Contact 
Samsung’s Call Center for assistance.
No: Select No  if you can hear sound 
from the speakers. There may be a 
problem with your external equipment. 
Please check your connections. If the 
problem persists, refer to the external 
device’s user manual.
 
●Signal Information
(digital channels only)
The reception quality of over-the- 

air HD channels is either perfect or 
the channels are unavailable. Signal 
Information displays HD channel 
signal strength so you can adjust your 
antenna to increase signal strength and 
receive HD channels.
 
●Reset
Reset all setting to factory defaults 
except for your network settings.
To reset your TV to default setting, 
follow these steps: 

1. 
Go to the Reset  menu. (Support  
→  
Self Diagnosis  → Reset
)
2.  
The PIN input screen appears. Enter 
the PIN using your remote.
3.  
When done, the PIN screen disappear 
automatically. The message All 
the settings will return to factory 
defaults. appears.
4.  
Select  Ye s. All settings have been 
reset. The TV will turn off and on 
again automatically. The Setup  

screen appears. For more information 
about Setup, see user manual.
 
●Troubleshooting
If your TV seems to be having a 
problem, access the troubleshooting 
guide for a solution.
Software Update
Menu  → Support 
→ Software Update
The Software Update menu lets you 
upgrade your TV’s software to the 
latest version. 

Current Version: This is the software 
version already installed in the TV.
Upgrading to the Latest Version You can upgrade in four ways: 
– By USB
 
– Online
 
– Alternative Software
 
– Standby Mode Upgrade
The four methods are explained in the 
following pages.
 
NBe careful not to turn off the power