Samsung Television UN60D7050VF User Manual

▶
English
▶
Smart Hub at a Glance
TV Screen: Displays the current input source  screen.
My Applications: Displays 
your personal gallery of 
applications which you can 
add to, modify, and delete.Recommended : Displays 
recommended contents 
managed by Samsung.
Controls:  
● a Red (Login): To log in to Smart Hub.
 
● b Green (Sort by): To sort the applications.
 
● { Yellow (Edit Mode): To edit the applications.
 
● } Blue (Settings): To change the settings of Smart Hub.
 
N The colored buttons may work...

▶
English
▶
 
NNOTE
 
●Samsung Electronics takes no legal responsibility for any interruption of the 
Smart Hub service caused by the service provider for any reason.
 
●The Smart Hub service downloads and processes data via the Internet so 
that you can enjoy the Internet contents on your TV screen. If the Internet 
connection is unstable, the service may be delayed or interrupted. Furth\
ermore, 
the player may turn off automatically in response to conditions on the Internet. 
If this occurs, check the...

▶
English
▶
 
●For more information about a Smart Hub service, visit the web site of the 
applicable service provider.
 
●The services provided are subject to change by the Smart Hub service provider 
without notice.
 
●The Smart Hub service contents may differ depending on the player’s firmware 
version.
 
●For pay DivX contents with copy protection can only be played through a 
composite, a component or an HDMI cable.  

▶
English
▶
Starting Smart Hub for the First Time
To start Smart Hub for the first time, follow these steps :1.  Press the SMART HUB button.
2. The  Smart Hub screen appears. In a few cases, the Country screen appears 
immediately after.
3.  If the Country screen has appeared, press the 
u / 
d  / 
l / 
r buttons to select 
your country, then press the ENTER E button.
 
NCertain applications are available only in certain countries.
4. The  General Disclaimer screen appears. Press the 
l / 
r buttons to...

▶
English
▶
5. The Privacy Policy screen appears. Press the l / 
r buttons to select Agree, then 
press the ENTER E button.
6. The  Service Update screen appears and installs a number of services and 
applications. When done, it closes. The applications and services downlo\
aded are 
displayed on the Smart Hub screen. This may take some time.
 
NSmart Hub may close momentarily during the installation process.
 
NA number of screens may appear after installation. You can press the 
ENTER
E button to close...

▶
English
▶
Using the KeypadPressing the – button on the remote while you are using the Screen Keypad 
enables you to change the text fields to lower case, capitalized case, u\
pper case, 
numbers and icons.
You can use this Screen Keypad in a several Smart Hub applications.
Method 1: Using keypad of ABC type.1.  For example, suppose that you want to input “105Chang”.
2.  Press the – button on the remote 3 times to change the input mode from lower 
case to numbers.
3.  Press the 1, 0 and 5 button in...

▶
English
▶
4. Press the – button on the remote 4 times to change the input mode from 
numbers to upper case.
5.  Press the 2 button on the remote 3 times to input C.
6.  Press the – button on the remote 3 times to change the input mode from upper 
case to lower case.
7.  Press buttons on the remote to input the rest of “Chang”. When done, press 
the ENTER
E button.
Method 2:  Using the Keypad of T9 type.
1.  For example, suppose that you want to input “105Chang”
2.  Press the – button on the remote 3...

▶
English
▶
4. Press the – button on the remote 3 times to change the input mode from 
numbers to capitalized case.
5.  Press numbers in sequence: 2, 4, 2, 6, 4. A window will appear displaying a list 
of words that can be entered using the selected numbers. Select “Chang” from 
the list.
 
NIf “Chang” cannot be found in the list, select + to create your own dictionary.
Add your own word to your dictionary  

▶
English
▶
Creating an AccountTo establish your own, exclusive, configuration of Smart Hub, create your own 
Smart Hub account.
 
NNote
 
●You must use an e-mail address as an ID.
 
●You can register up to 10 User Accounts.
 
●You do not need an account to use Smart Hub.  

▶
English
▶
To create an account, follow these steps:1.  Press the 
a button on your remote control. The Login screen appears.
2.  Press the 
u / 
d  / 
l / 
r buttons to select Create Account, and then press the 
ENTER E button.
3.  On the next screen, select Smart Hub Account, and then press the ENTER
E 
button. An entry screen and keypad appear.
4.  Use the keypad to enter your e-mail address. This will serve as your ID.