Samsung Television UN55ES7500F User Manual
Have a look at the manual Samsung Television UN55ES7500F User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Service Provider. message appears. WPS(PBC) Network Setup If your router has a WPS(PBC) button, you can configure your TV's wireless network connection using the WPS(PBC) button more easily. To set up your TV's wireless network connection using WPS(PBC) , follow these steps: 1. Go to Network Settings screen. (Network → Network Settings)
2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. Select the WPS(PBC). 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 5. The network connection screen
appears, and network setup is done. Plug & Access Network Setup The Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your non-Samsung wireless router does not support Plug & Access, you must connect using one of the other
methods. NYou can check for equipment that supports Plug & Access on www. samsung.com. To set up your TV's wireless network connection using Plug & Access, follow these steps: 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless
router. Check the router’s LED’s to make sure it is on (Blinking → on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads the connection information. 4. Wait until the connection is automatically established. NIf Plug & Access does not connect your TV to your wireless router,
a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again, disconnect the USB memory stick, reset the AP, and then try again from Step 1. You can also choose one of the other connection setup methods. 5. The network connection screen appears, and the network setup is done.
6. Place the wireless router in a desired location. NIf the wireless router’s settings change or you install a new wireless router, you must perform the Plug & Access procedure again, beginning from Step 1. Network Status Menu → Network → Network Status You can check the current network and
Internet status. When the wireless network connection failed... ●Wireless network connection failed. No wireless router selected. Go to Network Settings to select your router. ●Unable to connect to wireless router. Try the following: check that the router is turned on, and if it is try turning it off and on again. Check if you need to enter a security key to use the router.
●IP auto setting failed. Try the following to set your IP address automatically. Or set your IP address manually by selecting IP Settings. - Ensure DHCP server is enabled on router and unplug and re-plug-in the router. - Contact your Internet Service Provider for more information. ●Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings.
Contact your Internet Service Provider for more information. ●Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings, or contact your Internet Service Provider to access the Internet. ●Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.