Samsung Television UN55ES7500F User Manual

Enable or disable the Motion Control 
function. Lets you control your TV by 
moving the TV cursor using specific 
motions.
 
NMotion Control function can be 
affected recognition by motion 
posture, or ambient brightness 
conditions.
 
NSome applications may not support 
Motion Control.
 
NYou may experience physical fatigue  

when you use the Motion Control for 
a long time.
 
NTo use the Motion Control, please 
avoid direct sunlight.
 
NWe are recommended using  Motion 
Control function within about 5 ― 
13 ft with your TV. TV Camera's 
recognition range may differ 
depending on the angle of camera or 
other conditions. You can check the 
recognition range of TV camera by  

using Motion Control Environment 
Test (System  → Voice and Motion 
Control →  Motion Control →  Motion 
Control Environment Test ).
 
●Motion Control
Turns the Motion Control function on 
or off.
 
●Motion Guide Bar Size
Set the Motion Guide Bar Size  mode to 
Minimum  or Full.
 
●Motion Control Environment Test 

You can test the brightness of room 
and the camera angle. 
– Brightness Test: This test checks to 
see if your room is bright enough 
for Motion Control to work properly. 
Select Start using your remote. The 
test starts and takes a few seconds. 
(Appropriate ambient brightness: 50 
– 500 Lux)
 
NDo not illuminating a sunlight or 
lights directly into the camera lens. 

 
NMake sure that the camera lens is 
cloaked by an object.
 
– Camera Angle Test: On the Camera 
Angle Test screen, select Start using 
your remote. A rectangle appears on 
the screen. Move yourself into the 
rectangle by adjusting the camera 
or moving yourself in front of the 
camera. If you are not within the 
rectangle position, the test may not 
work properly. After aligning your  

body with the TV, raise your hand 
while opening it toward the screen, 
hold it for a moment and then wave 
it 3~4 times to the left and right.
To use the Motion Control function, follow 
these steps:
1. 
To use the  Motion Control, raise 
your hand while opening it toward 
the screen, hold it for a moment and 
then wave it 3~4 time to the left and 
right.  Motion Control starts. If the  

Motion Control starts, the cursor is 
displayed at the center of the screen 
and the Motion Guide Bar Size is at 
the bottom of the screen.
2.  
Control the TV using your hands. For 
the useable motions, see below.
 
NNote that the Motion Control 
function closes if your hands go out 
of the camera range.
 
NWhile using the Motion Control, 
if you use the other devices (i.e.  

remote control, keyboard, etc.), 
Motion Control closes.
Controlling the TV with your hands using 
motions
 
● Access Motion Control
 
– Action : Spread your hand in the 
direction of the camera, and shake 
it three or four times from a side to 
side.
 
●  Pointing Navigation
Moves the cursor to the position you  

want. 
– Action : Spread your hand and guide 
the cursor to position you want.
 
●  Run
Selects an item or executes a command 
that is  indicated by the cursor or is 
highlighted.
 
– Action : Clench your fist.
 
NWhen you are viewing a page, you 
can use the Run motion to move 
the page in the direction you want. 
To move a page, clench your fist,  

keep it clenched, and then move it in 
the direction you want the page to 
move. Note that not all pages can be 
moved.
 
●  Return
Return to the previous menu.
 
– Action : Spread your hand and rotate 
it counterclockwise.
 
●Channel / Volume Control
Changes the channel or adjust the 
volume.