Samsung Television S9CATSCF Specifications

24
11 Set Network type  to Wired and then select  Connect.
Network Settings
Select your network type.
Network type Wired
Connect
Plug a network cable into 
the back of your TV.
21 Select  Stop when the TV attempts to connect to the network. Once the network connection has 
been interrupted, select IP Settings .
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network IP SettingsRetryClose
31 From the IP Settings  screen, set IP Setting to Enter manually...

2425
Failed Wired Connection
No network cable found Try Now Try Now
Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is 
on, try turning it off and on again.
IP auto setting failed Try Now
Perform the following or set the IP address manually from IP Settings.
11 Ensure that the DHCP server is enabled on the router and reset the router.
21 If this does not work, contact your Internet Service Provider for more information.
Unable to connect to the...

26
Wireless Network Setup
Screen Menu > Network > Network Settings
Network
Network Status
Network Settings
Wi-Fi Direct
AllShare Settings
Device Name  [TV]Samsung LE...
 
"The displayed image may differ depending on the model.
Automatic Wireless Network Setup
Connect the TV to the Internet via a wireless router. Check the wireless router's SSID and security 
key settings before attempting to connect. The security key can be found on the wireless router's 
configuration screen.
11 Setting...

2627
Manual Wireless Network Setup
If the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS values 
to connect to the network manually. To get the IP address, subnet mask, gateway and DNS values, 
contact your Internet Service Provider (ISP). Refer to the "Dynamic versus Static IP Addresses" for 
more information.
11 Setting  Network type  to Wireless  automatically displays a list of available wireless networks.
Network Settings
Select your network type....

28
51 From the IP Settings screen, set IP Setting to Enter manually , enter IP Address , Subnet Mask, 
Gateway, and the DNS Server values, and then select  OK.
IP Settings
IP Setting Enter manually
IP Address  0.0.0.0
Subnet Mask 0.0.0.0
Gateway  0.0.0.0
DNS Setting  Enter manually
DNS Server  0.0.0.0
OKCancel
61 The TV attempts to connect to the network again using the specified settings. A confirmation 
message is then shown once a connection is established. Select  OK to proceed.
Using the WPS Button...

2829
Failed Wireless Connection
Wireless network connection failed, or no wireless router selected. Try Now Try Now
Go to Network Settings and select the correct router.
Unable to connect to a wireless router Try Now Try Now
Check the following:
11 Check that the router is turned on, and if it is, turn it off and on again.
21 Enter the correct security key if required.
IP auto setting failed Try Now
Perform the following or set the IP address manually from  IP Settings.
11 Make sure that the DHCP server...

30
Connected to a local network, but not to the Internet Try Now
11 Make sure that the Internet LAN cable is connected to the router's external LAN port.
21 Check the DNS settings under IP Settings.
31 If the problem persists, contact your Internet Service Provider.
Network setup complete, but unable to connect to the Internet Try Now
If the problem persists, contact your Internet Service Provider.
Dynamic versus Static IP Addresses
If the network requires a dynamic IP address, use an ADSL modem or...

3031
Checking the Network Status
Screen Menu > Network > Network Status  Try Now
Network
Network Status
Network Settings
Wi-Fi Direct
AllShare Settings
Device Name  [TV]Samsung LE...
 
"The displayed image may differ depending on the model.
View the current network and Internet status.
Mobile Device Connection
Network
Network Status
Network Settings
Wi-Fi Direct
AllShare Settings
Device Name  [TV]Samsung LE...
 
"The displayed image may differ depending on the model.
You can either directly...

32
Wi-Fi Direct
Screen Menu > Network > Wi-Fi Direct Try Now
Connect a mobile device that supports Wi-Fi Direct to the TV without using a wireless router.
11 Enable Wi-Fi Direct on the mobile device and then launch  Wi-Fi Direct. The TV automatically 
scans for and displays a list of available devices. The TV's name also appears on the mobile 
device.
21 Select the device from the list to initiate a connection. If a connection request is made by the 
TV, a permission message appears on the mobile...

33
Controlling the TV
Smart Touch Control
The Smart Touch Control makes it easier and more convenient to use the TV. For example, you can 
use the remote panel's built-in touch pad to move the focus and make selections as you would on a 
computer using a mouse. In addition, you can use the virtual remote panel displayed on the screen to 
change channels, play media files, and access favorites.
Inserting the Batteries (AAA X 2)
11 Slightly lift the battery cover by pulling the strap or using a plastic...