Samsung Television HU8550 User Manual

4445
 
●Wall-mounted LAN Outlet
Connecting to a Wired Internet Network Automatically
MENU  > Network >  Network Settings  Try Now
Automatically connect to an available network.
11 Set the Network type  to Wired, and then select  Connect.
21 The TV attempts to connect to an available network. Once it is successful, you will see a 
confirmation message. Select  OK. If the attempt fails, try again, or connect manually. 

46
Connecting to a Wired Internet Network Manually
MENU > Network >  Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask, 
gateway, and DNS values manually to connect to the network. To get these values, contact your 
Internet Service Provider (ISP).  
"
Refer to the " Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP 
addresses.
11 Set the Network type  to Wired, and then select...

4647
31 In the IP Settings screen, set IP Setting to Enter Manually .
IP Settings
IP Setting  Enter Manually
IP Address 0.0.0.0
Subnet Mask  0.0.0.0
Gateway 0.0.0.0
DNS Setting  Enter Manually
DNS Server 0.0.0.0
OK Cancel
41 Select IP Address . When the IP Address entry window appears, enter three digits into each field 
on the IP Address line. If the value has less than three digits, add leading zeroes. For example, 
to enter 10, enter 010. After three digits have been entered in a field, the highlight...

48
Establishing a Wireless Internet Connection
Connecting the TV to the Internet gives you access to online services and SMART features, and lets 
you update the TV's software quickly and easily through the Internet.
Connecting to a Wireless Internet Network Automatically
MENU > Network >  Network Settings
Connect the TV to the Internet via a wireless router. Make sure you have the wireless router's SSID 
(name) and password settings before attempting to connect. The password can be found on the...

4849
Connecting to a Wireless Internet Network Manually
MENU > Network >  Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask, 
gateway, and DNS values manually to connect to the network. To get the IP address, subnet mask, 
gateway and DNS values, contact your Internet Service Provider (ISP).  
"
Refer to the " Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP 
addresses.
11 On the...

50
51 In the IP Settings screen, set IP Setting to Enter Manually .
IP Settings
IP Setting  Enter Manually
IP Address 0.0.0.0
Subnet Mask  0.0.0.0
Gateway 0.0.0.0
DNS Setting  Enter Manually
DNS Server 0.0.0.0
OK Cancel
61 Select IP Address . When the IP Address entry window appears, enter three digits into each field 
on the IP Address line. If the value has less than three digits, add leading zeroes. For example, 
to enter 10, enter 010. After three digits have been entered in a field, the highlight...

5051
Troubleshooting Internet Connectivity Issues
If you are not able to connect the TV to the Internet, read the information below.
Troubleshooting Wired Internet Connectivity Issues
No network cable found Try Now Try Now
Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is 
on, try turning if off and on again.
IP auto setting failed Try Now
Do the following or configure the IP Settings manually.
11 Ensure that the DHCP server is enabled on the...

52
Network setup is complete, but unable to connect to the Internet Try Now
If the problem persists, contact your Internet Service Provider.
Troubleshooting Wireless Internet Connectivity Issues
Wireless network connection failed, Try Now Try Now
Selected wireless router not found. Go to Network Settings and select the correct router.
Unable to connect to a wireless router Try Now Try Now
Check the following:
11 Check if the router is turned on. If it is, turn it off and on again.
21 Enter the correct...

5253
Connected to a local network, but not to the Internet Try Now
11 Make sure that the Internet LAN cable is connected to the router's external LAN port.
21 Check the DNS values in IP Settings.
31 If the problem persists, contact your Internet Service Provider.
Network setup is complete, but unable to connect to the Internet Try Now
If the problem persists, contact your Internet Service Provider.
Checking the Internet Connection Status
MENU > Network >  Network Status  Try Now
Network
Network...

54
Using Multiple Functions on a Single Screen (Multi-Link 
Screen)
MENU > Picture >  Open Multi-Link Screen Try Now
Multi-Link Screen allows you to search the Web, use apps, and much more simultaneously while 
watching TV.
 
"
Before using Multi-Link Screen, make sure the TV is connected to the Internet. Using Multi-Link Screen 
requires an Internet connection.
 
"(In the U.S.A and Canada) Before using Smart Hub with Multi-Link Screen, go to On TV Settings  (Smart 
Hub >  On TV Settings  > Set...