Samsung Television HL-R4677W Instructions Manual

English - 61
Custom Settings
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
Press the 
…or †button to
select “My Color Control”,
then press the ENTER button.
2
Press the …or †button to
select “Detail Control”, then
press the ENTER button.
3
Press the …or †button to
select the desired My Color
Control, then press the
ENTER button.
There are three colors:
“Pink”, “Green” and “Blue”.
Press the 
œor √button to
adjust the value of a color
selected.
Changing...

English - 62
Picture Control
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Green or Blue color to enhance the picture according to the users
particular color weakness.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “Color Weakness”,
then press the ENTER button.
3
Press the ENTER button to
select “Color Weakness”.
Press the 
…or †button to
select “On”, then press the
ENTER button.
4
Press the...

English - 63
Setting the Film Mode
You can automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Film Mode”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
NOTE
•Film mode is supported in 480i only.
Picture
Mode : Standard√Color Tone...

English - 64
Picture Control
Viewing Picture-In-Picture
One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP
system allows you to watch two different pictures at once, even if you don’t have a VCR or DVD
connected to your TV.
Activating the PIP
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the ENTER button to
select “PIP”.
Press...

English - 65
Selecting an External Source
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Source”, then press
the ENTER button.
If you have not connected
any equipment to the TV’s
input jacks, the signal from
these inputs will not appear.
Press the 
…or †button to
select an...

English - 66
Picture Control
Swapping the Sub Picture and Main Picture
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Swap”, then press
the ENTER button.
The sub picture appears in
the main picture, and vice
versa.
Press the EXIT button to exit.
NOTE
•SWAPis not available when the Main picture is a Digital
broadcast.
Picture
Mode : Standard√Color Tone...

English - 67
Changing the Size of the Sub Picture
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Size”, then press the
ENTER button.
Press the 
…or †button to
select a size you want, then
press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Color Tone :  Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More...

English - 68
Picture Control
Changing the Location of the Sub Picture
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Position”, then press
the ENTER button.
Press the 
…or †button to
select a position you want,
then press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Color Tone :  Warm1√Size : 16:9√Digital NR : On√DNIe :...

Changing the Channel of the Sub Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
English - 69
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press the 
…or †button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to...

English - 70
Picture Control
Selecting the Sound Source
You can use this feature to hear sound from the main or sub (PIP) picture.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Sound Select”, then
press the ENTER button.
Press the 
…or †button to
select “Main” or “Sub”, then
press the ENTER button.
Press the EXIT button to exit.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal...