Samsung Syncmaster Xl2370 Led User Manual

							Major Safety Precautions1-3
 Caution
When thunder or lighting occurs, unplug the 
power cord and under no circumstance 
touch the antenna cable as this is danger-
ous.
• Otherwise, it may result in electric shock 
or fire.Avoid dropping an object over the product 
or cause impact to the product.
• Otherwise, it may result in electric shock 
or fire.
Avoid moving the product by pulling the 
power cord or antenna cable.
• Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.When a gas leak occurs, do not touch the 
product or the power plug and ventilate 
immediately.
• A spark may result in an explosion or 
fire.
• During a thunder or lighting storm, do 
not touch the power cord or antenna 
cable.
Avoid lifting up or move the product by hold-
ing only the power cord or signal cable.
• Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.Avoid using or placing inflammable spray or 
objects near the product.
• This may result in an explosion or fire.
Take care not to block the vent by a table 
cloth or curtain.
• Otherwise, it may result in fire due to 
internal overheating.Avoid inserting metal objects such as a 
chopsticks, coins or hairpins, or inflamma-
ble objects into the product (the vents, 
ports, etc).
• If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a service center.
• Otherwise, it may result in a problem 
with the product, electric shock or fire.
Avoid placing a liquid container such as a 
vase, flowerpot, beverage, cosmetics or 
drugs, or a metal object over the product.
• If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a  service 
center.
• Otherwise, it may result in a problem 
with the product, electric shock or fire.
Displaying a still image for a long time may 
create a persistent image or stain on the 
screen.
• If you do not use the product for a long 
time, use the power-saving mode or set 
the screensaver to the moving picture 
mode.When not using the product for a long time 
such as leaving your home, unplug the 
power cord from the wall outlet.
• Otherwise, it may cause dust 
accumulation and result in fire caused 
by overheating or short circuit or result in 
an electric shock.
Set the appropriate resolution and fre-
quency for the product.
• Otherwise, it may result in eye strain.Avoid turning the product upside down or 
move the product holding only the stand.
• This may cause the product to fall 
resulting in damage to the product or 
injury.
 
						

							1-3Major Safety Precautions
Maintaining the Correct Posture when Using this Product 
Do not place the adapter on top of another 
adapter.
• Otherwise, it may result in fire.Keep power adaptor away from any other 
heat source. 
• Otherwise, it may result in fire.
Remove the vinyl cover of the adapter 
before using the adaptor.
• Otherwise, it may result in fire.Always keep power adaptor in well-venti-
lated area. 
Be careful that adaptor should not be in 
contact with water and therefore not be wet. 
• This may cause a malfunction, electric 
shock or fire. Do not use adaptor by the 
waterside or outside particularly when it 
rains or snows. Be careful that adaptor 
should not be wet while cleaning floor 
with water.Watching the product from too close a dis-
tance continuously may damage your eye-
sight.
Avoid using a humidifier or cooker near the 
product.
• Otherwise, it may result in electric shock 
or fire.It is important to give your eyes some rest (5 
minutes every hour) when viewing the prod-
uct screen for long periods of time.
• This will alleviate any eye strain.
Since the display panel is hot after using it 
for a long time, do not touch the product.Keep small accessories away from the chil-
dren.
Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may 
be injured.
• If the product is tilted excessively, the 
product may fall and this may result in 
injury.Avoid placing a heavy object over the prod-
uct.
• Otherwise, it may result in a problem 
with the product or injury.
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and 
face the screen forwards.
• Maintain the correct posture when using this product. 
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or 
higher and maintain the position of your arm so that your arm is below your heart.
 
						

							Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
 The cleaning cloth is supplied with black high-glossy models only. 
CONTENTS
Installation Manual Product Warranty User Manual DVI-A to D-Sub Cable
Power Cord DC-Adapter Cleaning Cloth Stand Connector
Stand
OPTIONAL PARTS
HDMI Cable DVI Cable
 
						

							2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the cloth 
so that the front of the product is facing downwards.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the 
figure.
 
						

							Installing the Product2-2
- Caution
Avoid lifting the product holding only the stand.
 
						

							2-3Installing the Product
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product faces downwards.
Hold the main body of the product with your hand as shown by the figure. 
Pull the stand in the direction of the arrow as shown in the figure to separate it.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as 
shown in the figure.
 
						

							Installing the Product2-4
2-4 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending on the video output supported by the PC.
• When the graphics card provides D-Sub (Analog) output
• Connect the [DVI IN] port of the product to the [D-Sub] port on your PC using the DVI-A to D-Sub cable.
• When the graphics card provides DVI (Digital) output
• Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable.
2.Connect one end of the power cord to the DC-Adapter and plug the other end into a dedicated 220V or 110V wall outlet.
(The input voltage is switched automatically.)
 When the product is connected to a PC, you can turn the product on and use it.
When both the DVI () and D-Sub () cables are connected, you can select the input signal  by pressing the   button.
 
 
						

							2-5Installing the Product
2-5 Connecting an HDMI cable
1.Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable.
2.Connect a speaker to the [AUDIO OUT] port of the product.
 This product wont make any sound when only the HDMI cable is connected without a speaker connected.
When all the connections are complete, you can turn on and use the product and your DVD player (or digital output 
device).
Press the   button and select  as an input signal.
 
 
						

							Installing the Product2-6
2-6 Connecting to an Amplifier
1.Connect the [DIGITAL AUDIO OUT] terminal of your monitor to the optical input of your amplifier using an optical cable.
 • If no sound is emitted from the monitor, you need to use an amplifier.
• For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their 
manufacturers.
 
 
						

							2-7Installing the Product
2-7 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1.Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking 
direction. 
2.Connect the Kensington lock cable.
3.Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electronics store, an online shop, or our service center.