Samsung Syncmaster T27a550 User Manual

							▶◀▶
English
 
●SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background 
music or sound effects so that dialog can be heard more clearly.
 
●Equalizer
Adjusts the sound output.
 
●Balance L/R: Adjusts the balance between the right and left speaker.
 
●100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts 
the volume level of specific bandwidth frequencies.
 
●Reset: Resets the equalizer to its default settings.
   
						

							◀▶◀
English
 
■
Broadcast Audio Options
 
●Preferred Language
(digital channels only)
Use the up and down arrow keys to select a language, and then press 
ENTER
E.
Digital-TV broadcasts can simultaneously transmit many audio tracks (for 
example, simultaneous translations of the program into foreign languages).
 
NYou can only select a language from from among the ones being 
broadcasted.
   
						

							▶◀▶
English
 
●Multi-Track Sound (MTS) 
t
(analog channels only)
Select an option using the up and down arrow keys, and the press ENTER E.
Mono: Choose for channels that are broadcasting in mono or if you are having 
difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a 
foreign-language translation.
 
NDepending on the program being broadcast, you can listen to Mono, 
Stereo, or SAP.
   
						

							◀▶◀
English
 
■
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio 
signal when you connect the digital audio jack on the back of the TV to \
a digital 
audio in jack on a receiver or home theater.
 
●Audio Format (PCM / Dolby Digital): You can select the Digital Audio output 
(SPDIF) format.
 
NThe available Digital Audio output (SPDIF) format may differ depending on 
the input source.
 
●Audio Delay: Lets you correct timing mismatches between the audio track and 
the video when you are watching the TV and listening to digital audio output 
from the TV through an external device such as an AV receiver. When you 
select Audio Delay, a slider appears. User the left and right arrow buttons to 
adjust the slider. Press ENTER
E when done (0ms ~ 250ms).
   
						

							▶◀▶
English
 
■
Speaker Settings
 
●Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an 
external receiver, you may hear a sound echo caused by the difference in 
decoding speed between the TV’s speakers and the speakers attached to your 
audio receiver. If this occurs, set the TV to External Speaker.
 
NWhen you set Speaker Select to External Speaker, the TV’s speakers are 
turned off. You will hear sound through the external speakers only. When 
you set Speaker Select to TV Speaker both the TV’s speakers and the 
external speakers are on. You will hear sound through both.
 
NWhen Speaker Select is set to External Speaker, the 
y and MUTE 
buttons will not operate and the sound settings will be limited.
 
NIf there is no video signal, both speakers will be mute.
   
						

							◀▶◀
English
 
●Auto Volume (Off / Normal / Night)
Normal equalizes the volume level on each channel, so that when you change 
channels, the volume level is the same. Night equalizes and decrease the 
volume level on each channel, so each channel is quieter. Night is useful at 
night, when you may want to keep the volume low.
   
						

							▶◀▶
English
 
■
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults. Select Reset, press ENTER E, 
select OK on the pop-up, and then press ENTER E again.
   
						

							◀▶◀
Preference Features
English
 
❑
Setting the Time
 
OMENU
m 
→  System 
→Time 
→ ENTER
E
 
■
Time 
 
NThe current time will appear every time you press the INFO button.
 
●Clock: Setting the clock is for using various timer features of the TV.
 
NIf you disconnect the power cord, you have to set the clock again.
 
–Clock Mode: Set the current time manually or automatically.
Auto: Have the TV set the current time automatically using the time from a 
digital channel.
 
NYou must have the cable or an antenna connected to the TV to set the 
time automatically.
   
						

							▶◀▶
English
Manual: Set the current time manually.
 
NDepending on the broadcast station and signal, the auto time set up 
may not be correct. In this case, set the time manually.
 
–Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm. 
 
NSelect Clock Set. Select date or time, and then press ENTER
E. Use 
the number buttons to enter numbers or press the up and down arrow 
buttons. Use the left and right arrow buttons to move from one entry field 
to the next. Press ENTER E when done.
 
NAvailable only when Clock Mode is set to Manual.
 
NYou can set the Month, Day, Year, Hour and Minute directly by 
pressing the number buttons on the remote control.
   
						

							◀▶◀
English
 
–DST (Off / On): Switches the DST (Daylight Saving Time) function on or off.
 
NThis function is only available when the Clock Mode is set to Auto.
 
–Time Zone: Select your time zone.
 
NThis function is only available when the Clock Mode is set to Auto.
Using the Sleep Timer
 
OMENU
m 
→  System 
→ Time 
→ Sleep Timer 
→ ENTER
E
 
●Sleep Timer 
t: Automatically shuts off the TV after a preset period of 
time (30, 60, 90, 120, 150 and 180 minutes).
 
NUse the up and down arrows to select a period of time, and then press 
ENTER
E. To cancel Sleep Timer, select Off.