Samsung Syncmaster T24a550 User Manual

▶◀▶
English
 
■
Picture Options
 
OMENU
m 
→  Picture 
→ Picture Options 
→ ENTER
E
Select an option using the up and down arrow keys, and then press ENTER E. 
Use the arrow keys to change the setting, and then press ENTER E.
 
NIn PC mode, you can only make changes to 
Color Tone.
 
●Color Tone (Cool / Normal / Warm1 / 
Warm2) 
 
NWarm1 or Warm2 will be deactivated 
when the picture mode is Dynamic.
 
NYou can adjust and store settings for 
each external device connected to an input 
on the TV.
Picture...

◀▶◀
English
 
●Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): 
If the broadcast signal received by your TV is weak, you can activate the  Digital 
Noise Filter feature to reduce any static and ghosting that may appear on the 
screen.
 
NWhen the signal is weak, try each option until the the TV displays the b\
est 
picture.
Auto Visualization: When changing analog channels, displays signal strength.
 
NOnly available for analog channels.
 
NWhen the bar is green, you are...

▶◀▶
English
 
●HDMI Black Level (Normal / Low): Lets you select the black level on the 
screen to adjust the screen depth.
 
NAvailable only in HDMI mode.
 
●Film Mode (Off / Auto1 / Auto2): Sets the TV so that it senses and then 
processes film signals from all sources automatically and adjusts the picture for 
optimum quality.
 
NAvailable in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). 
   

◀▶◀
English
 
■
Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
   

▶◀▶
English
 
❑
Using the TV with Your PC
Set the input source to PC.
 
■
Auto Adjustment  t
 
OMENU
m 
→  Picture 
→ Auto Adjustment 
→ ENTER
E
Automatically adjusts the picture’s frequency, position, and fine tune settings in the 
PC mode.
 
NAvailable in PC mode only. 
 
NNot available if you connect your PC with an HDMI to DVI cable.
   

◀▶◀
English
 
■
PC Screen Adjustment
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ PC Screen Adjustment 
→ 
ENTER E
 
NAvailable in PC mode only.
 
●Coarse / Fine: Removes or reduces picture noise. If the noise is not removed 
by Fine-tuning alone, use the Coarse function to adjust the frequency as best 
as possible (Coarse) and Fine-tune again. After the noise has been reduced, 
re-adjust the picture so that it is aligned to the center of screen.
 
●Position: To adjust the PC’s screen position if it is...

▶◀▶
English
Using Your TV as a Computer (PC) Display
Entering the Video Settings (Based on Windows XP) 
For your TV to work properly as a computer display, you must enter the correct video 
settings into your PC.
 
NDepending on your version of Windows and your video card, the procedure on 
your PC will probably differ slightly from the procedure presented here. However, 
the same basic information will apply in most cases. (If not, contact y\
our computer 
manufacturer or Samsung Dealer.)
   

◀▶◀
English
1. On your PC, click “Control Panel” on the Windows start menu.
2.  Click “Appearance and Themes” in the “Control Panel” window, A display dialog-
box appears.
3.  Click “Display”. Another display dialog box appears.
4.  Click the “Settings” tab on the display dialog-box.
 
●On the Settings tab, set the correct resolution.
 
●If a vertical-frequency option exists on your display settings dialog box, select 
“60” or “60 Hz”. Otherwise, just click “OK” and exit t\
he dialog box.
Installing the...

▶◀▶
English
 
❑
Changing the Preset Sound Modes
 
OMENU
m 
→  Sound 
→ Sound Mode 
→ ENTER
E
 
■
Sound Mode  t 
Use the up and down arrow keys to select an option, and then press ENTER E.
 
●Standard: Selects the normal sound mode.
 
●Music: Emphasizes music over voices.
 
●Movie: Provides the best sound for movies.
 
●Clear Voice: Emphasizes voices over other sounds.
 
●Amplify: Increase the intensity of high-frequency sound to allow a better 
listening experience for the hearing impaired.
 
NIf Speaker...

◀▶◀
English
 
❑
Adjusting Sound Settings
 
OMENU
m 
→  Sound 
→ ENTER
E
 
■
Sound Effect
 
NIf Speaker Select is set to External Speaker, Sound Effect is disabled.
 
●SRS TruSurround HD (Off / On)
(Standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience through 
a pair of speakers using HRTF (Head Related Transfer Function) technology.