Samsung Syncmaster T24a350 User Manual

							▶◀▶
English
 
❑
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV 
Speaker.
1.  Select Receiver and set to On.
2.  Press the EXIT button to exit.
 
NIf your receiver supports audio only, it may not appear in the device list.
 
NThe receiver will work when you have properly connected the optical in jack 
of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
 
NWhen the receiver (i.e Home Theater) is set to On, you can hear sound 
output from the TV’s Optical jack. When the TV is displaying a DTV (air) 
signal, the TV will send out 5.1 channel sound to the receiver. When the 
source is a digital component such as a DVD and is connected to the TV via 
HDMI, only 2 channel sound will be heard from the receiver.
   
						

							◀▶◀
English
 
❑
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
 
•Check if the device is an Anynet+ device. The Anynet+ system 
supports Anynet+ devices only.
 
•Only one receiver (home theater) can be connected.
 
•Check if the Anynet+ device power cord is properly connected.
 
•Check the Anynet+ device’s Video/Audio/HDMI cable connections.
 
•Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
setup menu.
 
•Check whether the TV remote control is in TV mode.
 
•Check whether the remote control is Anynet+ compatible.
 
•Anynet+ doesn’t work in certain situations. (Searching channels, 
operating My Contents or Plug & Play (initial setup), etc.)
 
•When connecting or removing the HDMI cable, please make sure to 
search devices again or turn your TV off and on again.
 
•Check if the Anynet+ Function of Anynet+ device is set on.
   
						

							▶◀▶
English
I want to start Anynet+. 
•Check if the Anynet+ device is properly connected to the TV and 
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
Setup menu.
 
•Press the TOOLS button to display the Anynet+ menu and select a 
menu you want.
I want to exit Anynet+.
 
•Select View TV in the Anynet+ menu.
 
•Press the SOURCE button on the TV remote control and select a 
non- Anynet+ device.
 
•Press 
z  and PRE-CH to change the TV mode. (Note that 
the channel button operates only when a tuner-embedded Anynet+ 
device is not connected.)
The message “Connecting to 
Anynet+ device...” appears on 
the screen.
 
•You cannot use the remote control when you are configuring 
Anynet+ or switching to a view mode.
 
•Use the remote control after the TV has completed Anynet+ 
configuration or has finished switching to Anynet+.
The Anynet+ device does not 
play.
 
•You cannot use the play function when Plug & Play (initial setup) is 
in progress.
   
						

							◀▶◀
English
The connected device is not 
displayed. 
•Check whether or not the device supports Anynet+ functions.
 
•Check whether or not the HDMI cable is properly connected.
 
•Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
setup menu.
 
•Search Anynet+ devices again.
 
•Anynet+ requires an HDMI connection. Make sure the device is 
connected to your TV with an HDMI cable.
 
•Some HDMI cables may not support Anynet+ functions.
 
•If the connection is terminated because there has been a power 
failure or the HDMI cable has been disconnected, please repeat the 
device scan.
The TV sound is not output 
through the receiver.
 
•Connect the optical cable between TV and the receiver.
   
						

							▶◀▶
English
 
❑
Using the My Contents
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) 
device.
1.  Press the CONTENT button.
2.  Press the  u / 
d  / 
l / 
r button to select 
Videos, Photos, or Music, and then press 
the ENTER E button.
 
NTo view content on a USB device, you 
must plug the device into a USB jack on 
the TV.
 
NTo view content located on your PC, you 
must have connected your TV and your PC 
to your LAN and downloaded and installed 
PC Share Manager on your PC.
 
● The displayed menu may differ depending on 
the model.
Videos
Photos Music
Source Watch TV
My Contents
 
						

							◀▶◀
English
 
❑
Connecting a USB Device
1. Turn on your TV.
2.  Connect a USB device containing photo, 
music and/or movie files to the USB jack on 
the side of the TV.
3.  When a USB device is connected to the TV, 
the Connected Device window appears. 
Select a connected device, and then press 
ENTER
E.
 
NThe TV may display the files on the USB device automatically if it is \
the only 
device connected.
 
● The position of the USB port may differ depending 
on the model.
USB
   
						

							▶◀▶
English
 
NThe USB function might not work properly with unlicensed multimedia files.
 
NRead this information before using My Contents with a USB device:
 
●MTP (Media Transfer Protocol) is not supported.
 
●The file system supports FAT16, FAT32 and NTFS. Note that the supported 
maximum file size is 2GB for FAT16 and 4GB for FAT32.
 
●Some digital cameras or audio devices may not be compatible with this 
product.
 
●Certain types of USB Digital camera and audio devices may not be compati\
ble 
with this TV.
 
●Available only the Sequential jpeg format.
 
●My Contents only supports USB Mass Storage Class (MSC) devices. MSC is a 
Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb 
drives, Flash Card Readers and USB HDD (USB HUB are not supported). 
Devices should be connected directly to the TV’s USB port. 
   
						

							◀▶◀
English
 
●Before connecting your device to the TV, please back up your files to prevent 
them from damage or loss of data. SAMSUNG is not responsible for any data 
file damage or data loss.
 
●USB (HDD) is not supported.
 
●Do not disconnect the USB device while it is loading.
 
●The higher the resolution of the image, the longer it takes to display on the 
screen.
 
●The maximum supported JPEG resolution is 15360 x 8640 pixels.
 
●If a file is corrupted or the TV does not support the file type, the “Not Supported 
File Format” message apears.
   
						

							▶◀▶
English
 
●If the files are sorted by Folder View, up to 1000 files can be displayed in each 
folder.
 
●The TV cannot play MP3 files with DRM that have been downloaded from a for-
pay site. Digital Rights Management (DRM) is a technology that support\
s the 
creation, distribution and management of the digital content in an integra\
ted 
and comprehensive way, including protection the rights and interests of the 
content providers, preventing illegal copying of contents, and managing billings 
and settlements.
   
						

							◀▶◀
English
 
●If an over-power warning message is displayed while you are connecting or 
using a USB device, the device may not be recognized or may malfunction.
 
●If the TV has been no input during the time set in Auto Protection Time, the 
Screensaver will run.
 
●The power-saving mode of some external hard disk drives may be released 
automatically when connected to the TV.