Samsung Syncmaster T24a350 User Manual

▶◀▶
English
 
❑
Adjusting Picture Settings
 
OMENU
m 
→  Picture 
→ ENTER
E
 
■
Samsung MagicAngle
This feature allows you to see optimal screen quality according to your viewing 
position. When viewing the screen at an angle from below, above or the side of 
the TV, by setting the appropriate mode for each position you can obtain a similar 
picture quality as viewing the screen directly from the front.
 
●Samsung MagicAngle (Off / Lean Back Mode / Standing Mode): Select the 
viewing from the front, a...

◀▶◀
English
 
■
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several options for adjusting picture quality. Select an option 
using the up and down arrow keys, and then press ENTER E. Use the arrow 
keys to adjust the option value or select an option setting. When done, \
press 
ENTER E.
 
NWhen you make changes to Backlight, Contrast, Brightness, Sharpness, 
Color or Tint (G/R), the OSD will be adjusted accordingly.
 
NIn PC mode, you can only make changes to...

▶◀▶
English
 
❑
Changing the Picture Size
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ ENTER
E
 
■
Screen Adjustment
Screen Adjustment provides various picture size and aspect ratio options. Select 
an option using the up and down arrow keys, and the press ENTER E. Use the 
arrow keys to select an option in the sub-menu, and then press ENTER E.
 
●Picture Size: If you have a cable box or satellite receiver, it may have its own 
set of screen sizes as well. However, we highly recommend you use your TV’s...

◀▶◀
English
Zoom1: Use for moderate magnification. Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture so it fits the entire screen.
 
NAvailable with HD 1080i / 720p signals in 16:9 mode.
4:3: Sets the picture to (4:3) mode. For analog TV programs.
 
NDo not set your TV to 4:3 format for a long time. The borders displayed 
on the left and right, or top and bottom of the screen may cause image 
retention (screen burn) which is not...

▶◀▶
English
 
●Position: Adjusts the picture position. Position is only available if Picture size 
is set to Zoom1, Zoom2, Wide Fit, or Screen fit.
 
NTo use the Position function after selecting Zoom1, Zoom2 or Wide Fit, follow 
these steps:
1.  Press the 
d button to select Position.
2.  Press the ENTER
E button.
3.  Press the 
u or 
d button to move the picture up or down.
4.  When done, Press the ENTER
E button.
 
NIf you want to reset the pictures to its original position, select Reset in the...

◀▶◀
English
 
NTo use the Position function after selecting Screen Fit when connected to an 
HDMI (1080i/1080p) or Component (1080i/1080p) source, follow these steps:
1.  Press the 
d button to select Position.
2.  Press the ENTER
E button.
3.  Press the 
u, 
d , 
l  or 
r button to move the picture.
4.  When done, Press the ENTER
E button.
 
NIf you want to reset the pictures to its original position, select Reset in the 
Position screen. The picture will be set to its default position.
   

▶◀▶
English
 
●HD (High Definition): 16:9 - 1080i / 1080p (1920x1080), 720p (1280x\
720) 
 
●You can adjust and store settings for each external device you have connected 
to an input on the TV. 
 
●Picture Sizes available by Input Source:
Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p),   HDMI (720p, 1080i, 1080p) 16:9, Wide Fit, 4:3, Screen Fit
PC 16:9, 4:3
   

◀▶◀
English
 
❑
Changing the Picture Options
 
■
Advanced Settings
 
OMENU
m 
→  Picture 
→ Advanced Settings 
→ ENTER
E
Advance Settings are available in the Standard 
and Movie modes. In PC mode, you can only 
make changes to Gamma and White Balance. 
They are not available when you are watching a 
digital channel. 
To use, select an option using the up and down 
arrow keys, and then press ENTER E. Use the 
arrow keys to change a value or setting, and 
then press ENTER E.
 
● The displayed image may...

▶◀▶
English
 
●Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the 
screen depth.
 
●Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.
 
●Shadow Detail (-2 ~ +2): Increase the brightness of dark images.
 
●Gamma: Adjusts the primary color intensity.
 
●RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and 
Blue color for making fine adjustments to hue and saturation.
 
●Color Space (Auto / Native): Adjusts the range of colors (the...

◀▶◀
English
 
●White Balance: Adjusts the red, green, and blue brightness so that the 
brightest point of a picture becomes white.
R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue) 
darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
 
●Flesh Tone: Emphasizes pink “Flesh Tone.”
 
●Edge Enhancement (Off / On): Emphasizes object boundaries.
 
●Motion Lighting (Off / On):  
Reduces power...