Samsung Syncmaster T22a350 User Manual

							▶◀▶
English
Deleting a Channel from the Channel Manager:
1.  Select Delete, and then press the ENTER
E button. The Delete pop-up 
appears.
2.  Select OK on the pop-up, press ENTER
E, and then press ENTER
E again.
Adding a Channel to the Channel Manager: 1.  Select a deleted channel on the All Channels list, and then press the 
ENTER
E button.
 
NDeleted channels are grayed out.
2.  Press the TOOLS button on your remote. The Options menu appears.
3.  Select Add, press ENTER
E, and then press ENTER
E again.
   
						

							◀▶◀
English
 
NNOTE
 
●Your TV will display all channels, including channels you deleted from the 
Channel Manager, on the All Channels list.
 
●A gray-colored channel on the All Channels list indicates the channel has 
been deleted from the Channel Manager.
 
●Add only appears if you have selected a deleted channel on the All 
Channels list.
 
●Delete only appears if you have selected an added channel on the Added 
Ch. or All Channels list.
   
						

							▶◀▶
English
 
●Deselect All: Deselect all the selected channels. 
 
NDeselect All apppears only when you have selected one or more channels.
 
●Select All: Select all the channels in the channel list. To use, choose Select All 
in the Options menu, and then press ENTER
E. All channels are selected and a 
check appears by each channel. You can then apply one of the other options on 
the Options menu to all the selected channels.
   
						

							◀▶◀
English
 
❑
Memorizing Channels
 
OMENU
m 
→  Channel 
→ ENTER
E
 
■
Antenna (Air / Cable)  t
Your TV memorizes channels and adds the memorized channels to the Channel 
List with the Auto Program function. Before your TV can memorize channels, you 
must specify the signal source, either Air or Cable. If you select cable, when your 
start Auto Program, you must also specify the cable system type, STD, HRC, or 
IRC. If you don’t know your cable system type, contact your local cable company 
for the information. Most cable companies use STD.
   
						

							▶◀▶
English
To select Air or Cable, follow these steps:
1.  Push MENU
m 
→  Channel 
→ ENTER
E on your remote.
2.  Select Antenna, and then press ENTER
E.
3.  Select the source of your TV signal, Air or Cable, and then press the RETURN 
button.
 
NYou can select both if you have both connected.
   
						

							◀▶◀
English
 
■
Auto Program
Scans for channels automatically and stores them in the TV’s memory. 
To start Auto Program, follow these steps:
1.  Push MENU
m 
→  Channel 
→ ENTER
E on your remote.
2.  Select Auto Program, and then press ENTER
E.
3.  Select Air or Cable or both by highlighting and then pressing ENTER
E.
 
NIf you selected Air or Cable or both on the Antenna screen, your choice will 
already be selected.
4.  Select Search or Next, and then press ENTER
E.
5.  If you selected Cable, the Cable System screen appears. Select Digital Cable 
System, and then press ENTER
E. 
 
NIf you selected Air only, Auto Program starts.
   
						

							▶◀▶
English
6. Select STD, HRC, or IRC, and then press ENTER
E.
7.  Repeat for Analog.
8.  Select Search or Next, and then press ENTER
E. Auto Program starts.
 
NAfter all the available channels are stored, Auto Program removes scrambled 
channels. When done, the Auto Program menu then reappears. This process 
can take up to 30 minutes
How to Stop Auto Programming 1.  Press the ENTER
E button.
2.    A message will ask Stop Auto Program? Select Yes by pressing the 
l or 
r 
button.
3.  Press the ENTER
E button.
   
						

							◀▶◀
English
 
❑
Other Features
 
OMENU
m 
→  Channel 
→ ENTER
E
 
■
Clear Scrambled Channel
This function is filters out scrambled channels after Auto Program is completed. 
This process may take up to 20~30 minutes.
How to Stop the clear Scrambled Channels function 1.  Press the ENTER
E button to select Stop.
2.  Press the 
l button to select Yes.
3.  Press the ENTER
E button.
 
NThis function is only available in Cable mode.
   
						

							▶◀▶
English
 
■
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done 
automatically during the search and store operation. If the signal is weak or 
distorted, fine tune the channel manually. Scroll to the left or right until the image is 
clear.
 
NSettings are applied to the channel you’re currently watching.
 
NFine tuned channels that have been saved are marked with an asterisk 
“*” on 
the right-hand side of the channel number in the channel banner. 
 
NTo reset the fine-tuning, select Reset.
   
						

							◀▶◀
Basic Features
English
 
❑
Changing the Preset Picture Modes
 
OMENU
m 
→  Picture 
→ Picture Mode 
→ ENTER
E
 
■
Picture Mode
Picture modes apply preset adjustments to the picture. Select a mode using the 
up and down arrow keys, and then press the ENTER E button.
 
NIn PC mode, you can only select Entertain and Standard.
 
●Dynamic: Suitable for a bright room.
 
●Standard: Suitable for a normal environment.
 
●Movie: Suitable for watching movies in a dark room.
 
●Entertain: Suitable for watching movies and games.
 
NIt is available in PC mode.