Samsung Syncmaster T20a350 User Manual

11
Getting Started
En\blish
Accessories
 ✎Please make sure the \followin\b items are included with your T V. I\f any items are missin\b, contact your dealer.
 ✎The items’ colours and shapes may vary dependin\b on the models.
 ✎Cables not included in the packa\be contents can be purchased separately.
 ✎Check that there is no accessory hidden behind packin\b materials when you open the box.
[	 CAUTIO\b:	I\bSERT	SECURELY	LEST	SHOULD	BE	DETACHED	I\b	SET
 yRemote Control & Batteries (AAA\o x 2)
 yWarranty...

12
Getting Started
En\blish
\fnstalling the Stan\h\b
 ✎Be\fore assemblin\b the product, place the product down on a \flat and stable sur\face so that the screen is \facin\b 
downwards.
Insert the Stand C\oonnector into the 
Stand in the direction shown by the \o
fi\bure.Check i\f the Stand C\oonnector is firmly 
connected.
Turn the connectin\b screw at the 
bottom o\f the stand \o\fully so that it is \o
completely fixed.
Place a so\ft cloth ov\oer the table to 
protect the product and place the \o...

13
Getting Started
En\blish
Viewing the Control Panel
 ✎The product colour and shape may vary dependin\b on the model.
Power IndicatorBlinks and turns o\f\f when the power is \oon and li\bhts up in \ostandby mode.
Remote control sensor Aim the remote control towards this spot on the \oTV.
SOURCE
ETo\b\bles between all t\ohe available input \osources. In the on-screen menu, use this \o
button as you would \ouse the E\bTERE button on the remote control.
ME\bU Displays an on-screen menu, the OSD \o(on...

14
Getting Started
En\blish
Viewing the Remote C\hontrol
 ✎This is a special remote control \for the visually impaired persons and has Braille points on the Power, Channel and 
Volume buttons.
Installing	batteries	(Battery	size:	AAA)
CH LIST
MUTE
POWER
PRE-CH
MENU
TOOLS
RETURN
E-MANUALP.SIZEA\f/SUBT.
\fUALf-g
EXIT
IN\bO
TTX/MIX
ABC\f
P.MO\fESRS
CONTENT
H\fMI
SOURCE
GUI\fE
Turns the TV on and o\f\f.
Selects the 
HDMI mode directly.
Displays and selects the available video 
sources.
Returns to the previous...

15En\blish
Connections
Connecting to an A\hntenna
When the TV is initi\oally powered on, basic settin\bs\o proceed automatically.
 ✎Preset: Connectin\b the mains and antenna. 
Plug & Play (\fnitial\h Setup)
When the TV is initi\oally powered on, a sequence o\f\o on-screen prompts will assist in\o confi\burin\b basic sett\oin\bs. Press the 
POWERP button. Plug	&	Play is available only w\ohen the Input Source is set to TV.
 ✎Be\fore turnin\b on the T V, make sure the antenna cable is connected.
 ✎To return...

16En\blish
Connections
Connecting to an A\hV Device
Using	an	HDMI	or	an	HDMI	to	DVI	cable	(up	to	1080p)
Available devices: DV\oD, Blu-ray player, HD cable box, HD \oSTB (Set-Top-Box) satellite receiver, VCR
 ✎HDMI	I\b	1(DVI),	2	/	PC/DVI	AUDIO	I\b
 xFor better picture and audio quality, connect to a di\bital device usin\b an HDMI cable. 
 xAn HDMI cable supports di\bital video and audio si\bnals, and does not require an audio cable. 
 –To connect the TV to a\o di\bital device that \odoes not support...

17En\blish
Connections
Using	a	Component	(up	to	1080p)	or	an	Audio/Video	(480i	only)	and	a	Scart	Cable
Available devices: DV\oD, Blu-ray player, HD cable box, HD \oSTB (Set-Top-Box) satellite receiver, VCR
 ✎In Ext. mode, DT V Out supports MPEG SD Video and Audio only.
 ✎When connectin\b to AV	I\b, the colour o\f the AV	I\b	[ VIDEO] jack (\breen) will not match the video cable (yellow).
 ✎To obtain the best picture quality, the Component connection is recommended over the A / V connection.
PRPBYAUDIO...

18En\blish
Connections
Connecting to a CO\hMMON \fNTERFACE slot
Attaching	the	CI	Card	Adapter
Attach the adapter \oas shown below.
To connect the CI CAR\oD Adapter, \follow these steps\o.
 ✎We recommend attachin\b the adapter be\fore installin\b the wall mount, or 
insertin\b the “CI or CI+ CARD.”
1.	 Insert the CI CARD\o Adapter into the t\owo holes on the product 1.
 ✎Please \find a two holes on the rear o\f the T V. A two holes is beside the COMMO\b	I\bTERFACE port.
2.	 Connect the CI CARD\o Adapter...

19En\blish
Connections
Connecting to an A\hu\bio Device
Using	an	Optical	(Digital)	or	a	Headphone	Connection
Available devices: di\o\bital audio system, \oamplifier, DVD home theatre, PC
 ✎DIGITAL	AUDIO	OUT	(OPTICAL)
 xWhen a Di\bital Audio System is connected to the DIGITAL	AUDIO	OUT	(OPTICAL) jack, decrease the volume o\f 
both the T V and the system. 
 x5.1 CH (channel) audio is available when the T V is connected to an external device supportin\b 5.1 CH.
 xWhen the receiver (home theatre) is set to...

20En\blish
Connections
Connecting to a PC\h
Using	an	HDMI	cable	or	an	HDMI	to	DVI	cable	or	a	D\fsub	cable
 ✎Connectin\b throu\bh the HDMI cable may not be supported dependin\b on the PC.
Display	Modes	(D\fSub	and	an	HDMI	to	DVI	Input)
Optimal resolution : 19: 1360\o X 768 pixels / 20: \o1600 X 900 pixels / \o22~27: 1920 X 1080\o pixels
Screen	SizeModeResolutionHorizontal	Frequency	(KHz)
Vertical	Frequency	(Hz)
Pixel	Clock	Frequency
(MHz)Sync	Polarity	(H	/	V)
19"
20"
22"
23"
24"...