Samsung Syncmaster T200gn User Manual

A: The frequency can be changed by reconfiguring the video card.
A: Note 
that 
video card support can vary, depending on the version of the driver used. (Refer to the
computer or the video card manual for details.)
Q: How can I adjusts the resolution?
A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.
A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the...

3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or damaged.
4. Turn  off 
your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller
and computer system;  your monitor is functioning properly.
Warning Messages If there is something...

{T200,T200G,T220,T220G}
Check List
 Note
Before  calling 
for assistance, check the information in this section to see if you can remedy any prob-
lems yourself. If you do need assistance, please call the phone number on the Information section or
contact your dealer.
No images on the screen. I cannot turn on the monitor.
Q: Is the power cord connected properly?
A: Check the power cord connection and supply.
Q: Can you see "Check Signal Cable" on the screen?
A: (Connected using the D-sub cable)...

A: The monitor is in PowerSaver mode.
A:
Press a key on the keyboard to activate the monitor and restore the image on the screen.
A: If 
there is still no image, press the ' /SOURCE' button. Then press any key on the keyboard
again to activate the monitor and restore the image on the screen.
Q:

Connected using the DVI cable?
A: You may get a blank screen if you boot the system before you connect the DVI cable, or dis- connect and then reconnect the DVI cable while the system is running as...

LED is blinking but no images on the screen.
Q:
Is the frequency properly adjusted when checking the Display Timing on the menu?
A:
Adjust  the  frequency  properly  by  referring  to  the  video  card  manual  and  the  Preset  Timing
Modes.
(The maximum frequency per resolution may differ from product to product.)
There are only 16 colors shown on the screen. The screen colors have
changed after changing the video card.
Q: Have the Windows colors been set properly?
A: Windows XP : Set the resolution at...

Q: Did you install the program?
A: Reboot 
the 
computer after installing the program for the first time. If a copy of the program is
already installed, remove it, reboot the computer, and then install the program again. You need
to reboot the computer for it to operate normally after installing or removing the program.  Note
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
I  can 

see tiny amounts of alien substances when I look at the product
edge closely.
Q:...

* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A:
Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).
A: Windows ME/2000: Set the resolution at the Control Panel → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).
Q: How can I clean the outer...

Specifications
General
General
Model Name SyncMaster T190
LCD Panel
Size
19 inch (48 cm)
Display area 408.24mm (H) x 255.15 mm (V)
Pixel Pitch
0.2835 mm (H) x 0.2835 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color 16.7M
Resolution
Optimum resolution
1440 x 900 @ 60 Hz
Maximum resolution 1440 x 900 @ 75 Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL level (V high 
≥ 2.0 V, V...

Environmental considerations
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4 °F ~ 113 °F (-20 °C ~ 45 °C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the
monitor 
and 
the computer systems will provide the best operating conditions and monitor
settings. In most cases, the monitor installation will proceed automatically, unless the user
wishes to select alternate settings.
Dot...

Preset Timing Modes
If the 
signal  transferred  from  the  computer  is  the  same  as  the  following  Preset  Timing  Modes,  the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM,...