Samsung Syncmaster T190 User Manual

							1. Insert CD into the CD-ROM drive.
2.
Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I will..." then click "Next" and then click "Have disk". Using the Software
20 
						

							7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model
list and click the "Next" button. 8. If 
you can see following message window, then click the "Continue Anyway" button. Then click
"OK" button.  
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close" button then click "OK" button continually. Using the Software
21
 
						

							 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Choose "Monitor". Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please
stop installation
Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click "Driver" and then click on "Update Driver..." then click on the "Next" button.
6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk".
7. Click the "Browse" button then choose A:(D:\Driver).
8. Click the "Open" button, then click "OK" button.
9. Choose your monitor model and click the "Next" button then click "Next" button.
10. Click the "Finish" button then the "Close" button. If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click
the "Finish" button then the "Close" button.
Microsoft ®
 Windows ®
 Millennium Operating System
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button. Using the Software
22
 
						

							4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display Properties dia- logue box.
Microsoft ®
 Windows ®
 NT Operating System
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
2. In  Display  Registration  Information  window,  click  Settings  Tab  and  then  click  "All  Display Modes".
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK".
4. Click "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency).  Note
If  there 

is  no  Mode  at  All  Display  Modes,  select  the  level  of  resolution  and  vertical  frequency  by
referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press "Enter" at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window.
10. You  have  finished  setting  up  your  monitor.  Execute  X-Window  after  setting  other  requested hardware. Using the Software
23
 
						

							Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer
or 
other 
images scanned by a scanner or a digital camera are not the same as those shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a color administration system de-
veloped  by  Samsung  Electronics  in  association  with  Korea  Electronics  &  Telecommunications
Research Institute (ETRI). This system is available only for Samsung monitors and makes the color
of the images on the monitor the same as the printed or scanned images. For more information, refer
to Help (F1) in the software program.
How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of
the  program  Natural  Color  will  be  executed.  Click  Natural  Color  on  the  initial  screen  to  install  the
Natural Color software.
To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM
Drive,  click  the  [Start]  button  of  Windows  and  then  select  [Run...].  Enter  D:\color\NCProSetup.exe
and then press the [Enter] key. (If the drive where the CD is inserted is not D:\, enter the applicable
drive.)
How to delete the Natural Color software program Select  "Setting/Control  Panel"  on  the  "Start"  menu  and  then  double-click  "Add/Delete  a  program".
Select Natural Color from the list and then click the "Add/Delete" button.
MagicTune™ Using the Software
24
 
						

							Installation
1.Insert the installation CD into the CD-ROM drive.
2.
Click the MagicTune™ installation file.  Note
If  the 

popup window to install the software for the main screen is not displayed, proceed with the
installation using the MagicTune executable file on the CD.
3. Select installation Language, Click "Next".
4. When the Installation Shield Wizard window appears, click "Next".
5. Select "I agree to the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicTune™ program.
7. Click "Install".
8. The "Installation Status" window appears.
9. Click "Finish".
10. When  the  installation  is  complete,  the  MagicTune™  executable  icon  appears  on  your  desktop. Double-click the icon to start the program.
MagicTune™ execution icon may not appear depending on specification of computer sys-
tem or monitor. If that happens, press F5 Key. Installation Problems
The installation 

of MagicTune™ can be affected by such factors as the video card, motherboard and
the network environment.
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™It is recommended using MagicTune™ in Windows ®
 2000 or later. Hardware
•
32 MB Memory above
•

60 MB Hard disk space above
For more information, visit the MagicTune™ website. Using the Software
25
 
						

							Uninstall
The MagicTune™ 
program can be removed only by using the "Add or Remove Programs" option of
the Windows ®
 Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray] → [Start] → [Settings] and select [Control Panel] in the menu. If the program runs on Windows ®
 XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In  the  "Add  or  Remove  Programs"  screen,  scroll  down  to  find  "MagicTune™."  Click  on  it  to highlight it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears.  Note
Visit  the 

MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers)
and software upgrades. MultiScreen
Installation
1.Insert the installation CD into the CD-ROM drive.
2.

Click the MultiScreen installation file.  Note
If  the 

popup window to install the software for the main screen is not displayed, proceed with the
installation using the MultiScreen executable file on the CD.
3. When the Installation Shield Wizard window appears, click "Next".
4. Select "I agree to the terms of the license agreement" to accept the terms of use. Using the Software
26
 
						

							5. Click "Install".
6.
The "Installation Status" window appears.
7.
Click "Finish".
8. When  the  installation  is  complete,  the  Multiscreen  executable  icon  appears  on  your  desktop. Double-click the icon to start the program.
Multiscreen execution icon may not appear depending on specification of computer system
or monitor. If that happens, press F5 Key. Installation Problems
The installation 

of MultiScreen can be affected by such factors as the video card, motherboard and the
network environment.
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™It is recommended using MultiScreen in Windows ®
 2000 or later. Hardware
• 32 MB Memory above
•

60 MB Hard disk space above
Uninstall The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the
Windows®
 Control Panel.
Perform the following steps remove Multiscreen.
Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".
Select Multiscreen from the list and then click the "Add/Delete" button. Using the Software
27
 
						

							Adjusting the Monitor
Direct Functions
AUTO
When  the  'AUTO'  button  is  pressed,  the  auto  adjustment  screen  appears  as  shown  in  the  animated
screen on the center.
Auto adjustment 
allows the monitor to self-adjust to the incoming Analog signal. The values of  Fine,
Coarse and Position are adjusted automatically.
(Available in  Analog mode only)
To  make  the  automatic  adjustment  function  sharper,  execute  the  'AUTO'  function  while  the  AUTO
PATTERN is on. If auto adjustment does not work properly, press 'AUTO' button again to adjust picture with more
accuracy. If you change resolution in the control panel, auto function will be executed automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD
28
 
						

							This is the function that locks the OSD in order to keep the current states of settings or prevent others
from adjusting the current settings.
Lock : 
Hold down the MENU button for more than five (5) seconds to activate the OSD adjustment
lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment
lock function.  Note
Though the 
 OSD adjustment lock function is activated, you can still adjust the brightness and contrast,
and adjust Customized Key ( ) using the Direct button.
Customized key You can customize key assignment for the Custom button according to your preferences.
To 
view 

the  operating  screen  displayed  when  pressing  the  [    ]  button  after  configuring  the  cus-
tomized key for a function, click the name of each function.
(MagicBright - MagicColor - Color Effect - Image Size)  Note
You can configure the customized key for a required function via  Setup > Customized Key.
Adjusting the Monitor
29