Home > Samsung > Monitor > Samsung Syncmaster T190 User Manual

Samsung Syncmaster T190 User Manual

Here you can view all the pages of manual Samsung Syncmaster T190 User Manual. The Samsung manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 11

Others
 
 
Stand Base     Note
Cleaning Cloth is only provided for highly polished black products as a product feature.
Your Monitor
Initial Settings Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It 
can 
be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching
the maximum count.  Note
The resolution displayed on the screen is the optimal resolution...

Page 12

MENU button [MENU/ ]
Opens  the 
on-screen menu and exits from the menu. Also use to exit the OSD menu
or return to the previous menu. Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip Customized Key[ ]
You  can 

customize key assignment for the Custom button according to your pref-
erences.  Note
You  can 

configure the customized key for a required function via  Setup > Cus-
tomized Key. Adjust buttons [ ]
These buttons...

Page 13

 Note
See  PowerSaver 
described in the manual for further information regarding power
saving functions. For energy conservation, turn your monitor OFF when it is not
needed or when leaving it unattended for long periods.
Rear  Note
The configuration at the back of the monitor may vary from product to product. POWER port
Connect 
the 

power  cord  for  your  monitor  to  the  POWER  port  on  the  back  of  the
monitor. DVI IN port
Connect the DVI Cable to the DVI IN port on the back of your monitor....

Page 14

2. Connect the Kensington Lock cable.
3.
Fix the Kensington Lock to a desk or a heavy stationary object.  Note
See Connecting Cables  for further information regarding cable connections.Introduction
13 

Page 15

Connections
Connecting Cables
 Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.  Use a connection appropriate for your computer.
 Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [RGB IN]
 Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the DVI IN Port on the back of your Monitor. [DVI IN]...

Page 16

Using the Stand
Monitor Assembly
Monitor and Bottom
Folding the base  Note
You can tilt the monitor upwards at an angle of -1° to 21°. Connections
15 

Page 17

Using the Software
Monitor Driver
 Note
When prompted by the operating system for the monitor driver, insert the CD-ROM
included  with 
this monitor. Driver installation is slightly different from one operating
system  to  another.  Follow  the  directions  appropriate  for  the  operating  system  you
have.
Prepare  a  blank  disk  and  download  the  driver  program  file  at  the  Internet  web  site
shown here.
Internet web site :
http://www.samsung.com/ (Worldwide) Installing the Monitor Driver...

Page 18

 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
Installing the Monitor Driver (Manual) Microsoft®
 Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2. Click  (Start) and "Control Panel". Then, double-click on "Appearance and Personalization".
3. Click "Personalization" and then "Display...

Page 19

 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab. 7. Check 
the "Browse my computer for driver software" checkbox and click "Let me pick from a
list of device drivers on my computer". 8. Click 
"Have Disk...” and select the folder (for example, D:\Drive) where the driver setup file is
located, and...

Page 20

9. Select 
the model that matches your monitor from the list of monitor models on the screen, and
click "Next".  
10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft
®
 Windows ®
 XP Operating System Using the Software
19 
Start reading Samsung Syncmaster T190 User Manual

Related Manuals for Samsung Syncmaster T190 User Manual

All Samsung manuals