Samsung Syncmaster S24a850dw User Manual

21
Preparations
1
1 Preparations
1.2 Parts
1.2.1 Frontal Buttons
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
IconsDescription
Open or close the onscreen display (OSD) menu, or return to the last 
menu.
OSD control lock: Maintain the current settings, or lock the OSD 
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [ ] for five 
seconds. 
To unlock the locked OSD...

22
Preparations
1
1 Preparations
IconsDescription
  Configure 
Customized Key  and press [ ]. The following options will 
be enabled.
ECO  - MAGIC -  Image Size
 To configure  Customized Key , go to SETUP&RESET   
Customized Key and select the mode you want.
 
Move to the upper or lower menu or adjust the value for an option on the 
OSD menu.
Adjust the screen brightness.
Adjust the screen brightness.
 On SA850 models,  Volume (VOL) can be adjusted if a cable is 
connected to the [DP IN] or [AUDIO IN]...

23
Preparations
1
1 Preparations
1.2.2 Reverse Side
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
SA650
SA850
DC 14VDP IN DVI INRGB IN
 

24
Preparations
1
1 Preparations
PortDescription
Connects to the DC power adapter.
Connects to a PC via a DP cable.
Connects to a PC via a DVI cable.
Connects to a PC using the D-SUB cable.
Connects to the stereo cable 
Connects to an audio output device such as headphones.
Connect to a USB device. Compatible with a USB cable version 3.0 
or lower.
Connects to a PC via a USB cable.
 This port can only connect to a PC. 
 

25
Preparations
1
1 Preparations
1.3 Installation
1.3.1 Attaching the Stand
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
Place a protective cloth or 
cushion on a flat surface. Next, 
place the product with the face 
down on top of the cloth or 
cushion.Insert the stand 
base into the 
stand in the direction of the 
arrow. Do not remove the fixing pin until 
you are finished attaching the 
stand.
Tightly fasten the...

26
Preparations
1
1 Preparations
1.3.2 Adjusting the Product Tilt and Height
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
To adjust the height, remove the fixing pin.
The monitor tilt and height can be adjusted.
Hold the top center of the product and adjust the height carefully. 
1.3.3 Rotating the Monitor
You can rotate your monitor as shown below.
 Be sure to fully extend the stand before rotating the monitor....

27
Preparations
1
1 Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
 Power the product off and remove the power cable from the power socket. 
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding 
parts on the wall-mount kit or desktop stand you want to attach.
Place a protective cloth or 
cushion on a flat surface. Next, 
place the product with the face 
down on top of the cloth or 
cushion. Unfasten the screw from the...

28
Preparations
1
1 Preparations
 Notes
Using a screw longer than the standard length can damage the internal components of the 
product.
The length of screws required for a wall mount that does not comply with the VESA standards may 
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit 
or desktop stand using excessive force. The product may get damaged or fall and cause personal 
injury. Samsung shall not be held liable...

29
Preparations
1
1 Preparations
1.4 "MagicRotation Auto"
The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor 
and rotates the Windows screen accordingly.
[Software Installation]
1Insert the user manual CD provided with the product into the CD-ROM drive.
2Follow the instructions given on the screen to proceed with installation.
 After installation, the on-screen display (OSD) menu will be displayed in the language of the operating...

302 Connecting and Using a Source Device
2 
Connecting and Using a Source Device
2.1 Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.