Samsung Syncmaster S23a750d User Manual

							51
Resizing or Relocating the Screen
6
6 Resizing or Relocating the Screen
6.5.1 Configuring Menu V-Position
1Press [ ] on the product.
2Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  Menu V-Position and press [ ] on  the product. The following screen will 
appear.
4Adjust the  Menu V-Position  using the [ ] button.
m 
ReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   Wide
50
50
50
10
 
						

							527 Setup and Reset
7 
Setup and Reset
7.1 ECO
Adjust the power consumption of the product to save energy.
7.1.1 Eco Motion Sensor
The Eco Motion Sensor  activates to save power when it does not detect any movement within a 
specified area for a specified period of time.
Configuring the Eco Motion Sensor
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product. 
4Press [ ] to move to  Eco Motion Sensor and press [ ] on the product. 
The following screen will appear.
 This option is disabled if the product is connected to a PC that is in power-saving mode. 
zOff
z5 Min: Automatically turn off the display if no movement of an object or person is detected 
within a certain distance for 5 minutes.
z10 Min : Automatically turn off the display if no movement of an object or person is detected 
within a certain distance for 10 minutes.
z20 Min : Automatically turn off the display if no movement of an object or person is detected 
within a certain distance for 20 minutes.
z30 Min : Automatically turn off the display if no movement of an object or person is detected 
within a certain distance for 30 minutes.
z1 h : Automatically turn off the display if no movement of an object or person is detected within a 
certain distance for 1 hours.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
m 
ReturnEnterMove




ECO
Eco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display %¿
W
Off
OffOff
5 Min
10 Min
20 Min
30 Min
1 h
 
						

							53
Setup and Reset
7
7 Setup and Reset
Configuring Backlight
1Press [ ] on the product.
2Press [ ] to move to 
SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product. 
4Press [ ] to move to  Backlight and press [ ] on the product. The following screen will appear.
zOff: Turn off the screen and activate DPMS mode. If  Off is selected, it takes several seconds for 
the monitor to detect movement and turn on after it turned off.
zDimming: Reduce the brightness of the screen (still turned on).
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
 zThe optimal working area for Eco Motion Sensor  is within a certain distance (1m) and atcertain 
angle (40°).
zIf there is no user movement, the  Eco Motion Sensor may fail to detect motion.
zIf you think that the mode entry message appears too frequently, increase the time setting of the 
Eco Motion Sensor  or turn the Eco Icon Display  Off.
zAvoid using radio equipment such as a walkie-talkie near the product as this may cause a product 
malfuction.
 
7.1.2 Eco Light Sensor
The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the 
screen brightness depending on the ambient light intensity.
 zThis option is not available when  Bright is in Dynamic Contrast  mode.
zThis option is not available when  Eco Saving is enabled. 
Configuring the Eco Motion Sensor
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product. 
m 
ReturnEnterMove





ECO
Eco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display %¿
5 Min
Off
Off
Off
Dimming
m 
 
						

							54
Setup and Reset
7
7 Setup and Reset
4Press [ ] to move to Eco Light Sensor and press [ ] on the product. The following screen
will appear.
zOff
zOn : The Eco sensor detects the am bient illumination and automatica lly controls the brightness.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
Configuring Sensitivity
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Sensitivity and press [ ] on the product. The following screen will appear.
zHigh: High sensitivity that maximi zes the varying level of screen  brightness depending on the 
ambient light intensity.
zMedium : Intermediate sensitivity that sets a va rying level of screen brightness between High 
and  Low  depending on the ambient light intensity.
zLow: Low sensitivity that minimizes the varying  level of screen brightness depending on the 
ambient light intensity.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
Configuring Brightness Level
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
ReturnEnterMove





ECO
Eco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display
5 Min
LPPLQJ
Off
Off
Off
On
m 
ReturnEnterMove






ECOEco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display
5 Min
Dimming
On
Off
High
Medium
Low
m 
 
						

							55
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to ECO and press [ ] on the product.
4Press [ ] to move to  Brightness Level and press [ ] on the product. 
The following screen will appear.
zBrighter : Increase the current brightness of the screen.
zCurrent: Maintain the current brightness of the screen.
zDimmer : Decrease the current brightness of the screen.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
7.1.3 Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the 
monitor panel.
Configuring the Eco Saving Settings
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Eco Saving and press [ ] on the product. The following screen will appear.
z75%: Change the monitor power consumption to 75% of the default level.
z50%: Change the monitor power consumption to 50% of the default level.
zOff: Deactivate the  Eco Saving function.
5Press [ ] to move to the opti on you want and press the [ ].
ReturnEnterMove






ECO
Eco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display
5 Min
Dimming
On
High
%¿
Off
Brighter
Current
Dimmer
m 
ReturnEnterMove




ECOEco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display
Off
Off
%¿
2II 75%50%
 
						

							56
Setup and Reset
7
7 Setup and Reset
6The selected option will be applied.
 zThis option is not available when Bright is in Dynamic Contrast  mode.
zThis option is not available when  Eco Light Sensor is enabled. 
7.1.4 Eco Icon Display
Configuring the Eco Icon Display Settings
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Eco Icon Display and press [ ] on the product.
The following screen will appear.
zOff : Deactivate the  Eco Saving function.
zOn: Display the operation status of the Eco sensor as a pop-up guide.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
zThe Eco Motion Sensor  will activate power-saving mode if it is set to on and does not detect 
any movement for a specified time.
zA 10-second countdown timer will start along with the above picture before the power-saving 
mode activates showing the operation status of the  Eco Motion Sensor.
zIf the screen brightness is adjusted according to the ambient light intensity when the  Eco Light 
Sensor  is on, a pop-up as shown above will appear showing the adjusting screen brightness.
m 
ReturnEnterMove






ECO
Eco Motion Sensor
ÛBacklight
Eco Light Sensor
ÛSensitivity
ÛBrightness Level
Eco Saving
Eco Icon Display
5 Min
Dimming
On
High
Brighter
Off
On
 
						

							57
Setup and Reset
7
7 Setup and Reset
zWhen the screen becomes brighter as the ambient light becomes brighter and the Eco Light 
Sensor  activates, the brightness slid e bar level will increase with a sun image displayed above 
the bar. When the screen becomes darker, the brightness slide bar level will decrease with a 
moon image displayed above the bar. The brightness slide bar will be displayed for three 
seconds after the sensor activates.
zA pop-up as shown above will appear wh en an energy tree completes while Eco Icon Display  
is on.
 If the above picture is displayed, it means the  Eco Icon Display option is on. Change this 
setting to off if you do not want to display the pop-up.
 
zThe amount of energy saved by the  Eco Motion Sensor, Eco Light Sensor , and Eco Saving  
functions will accumulate and the progress can be viewed as a growing energy tree.
 The energy tree grows as the energy savings  of the monitor accumulate. Accordingly, the 
tree's growth will also be affected by other functions that involve power consumption such as 
the brightness control function.
 
zThe amount of energy savings accumulated by the  Eco Motion Sensor, Eco Light Sensor, 
and  Eco Saving  functions will be represented as  an amount of carbon dioxide.
zA complete energy tree will be displayed when the amount of energy savings accumulates toas 
much as the amount of carbon dioxide a tree absorbs in a year.
zThis shows that your energy saving is as effective as planting a tree so that you can easily 
understand the accumulation of energy savings over time and its effect by viewing the 
progressof a tree growing.
 
						

							58
Setup and Reset
7
7 Setup and Reset
zThe progress of a tree growing will be represented as 10 different images (stages). After one 
full-grown tree is complete, the initial image will be restored and the number of trees will 
continue to accumulate. The number for energy trees will be rounded to one decimal place.
7.2 Menu Transparency 
Set the transparency for the menu windows: 
7.2.1 Changing Menu Transparency
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Menu Transparency and press [ ] on the product. The following screen 
will appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
7.3 Language
Set the menu language. 
 zA change to the language setting will only be applied to the onscreen menu display.
zIt will not be applied to other functions on your PC. 
7.3.1 Changing the Language
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
m 
ReturnEnterMove






SETUP&RESET
ECO 
Menu Transparency
PC/AV Mode
Auto Source 
Display Time
Key Repeat Time
   English
Language
PC
Manual
20 sec
Acceleration
Off
OnÛ
m 
 
						

							59
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to Language and press [ ] on the product. The following screen will appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
7.4 PC/AV Mode
Set PC/AV Mode  to AV. The picture size will be enlarged. This  option is useful when you view a movie.
7.4.1 Configuring PC/AV Mode Settings
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  PC/AV Mode and press [ ] on the product. The following screen will 
appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
ReturnEnterMove






SETUP&RESET
ECO 
Menu Transparency
Language
PC/AV Mode
Auto Source  
Display Time 
Key Repeat Time 
  
HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
,WDOLDQR
0DJ\DU
3ROVNL
3RUWXJXrV

§
Ê
È
È
Á
¿
À
6YHQVND
7
						

							60
Setup and Reset
7
7 Setup and Reset
7.5 Auto Source 
Activate Auto Source .
7.5.1 Configuring Auto Source
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Auto Source and press [ ] on the product. The following screen will 
appear.
zAuto : The input source is automatically recognized.
zManual : Manually select an input source.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
7.6 Display Time 
Set the onscreen display (OSD) menu to automatically disappear if the menu is not used for a specified 
period of time. 
Display Time can be used to specify the time after which you want the OSD menu to disappear. 
7.6.1 Configuring Display Time
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
m 
ReturnEnterMove






SETUP&RESET
Off 
English
PC
Acceleration
ECO 
Menu Transparency
Language
PC/AV Mode
Auto Source 
Display Time 
Key Repeat Time
Ü
Auto
Manual
m