Samsung Syncmaster S23a750d User Manual

61
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to Display Time and press [ ] on the product. The following screen will 
appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
7.7 Key Repeat Time 
Control the response rate of a button when the button is pressed. 
7.7.1 Configuring Key Repeat Time
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Key Repeat Time and press [ ] on...

62
Setup and Reset
7
7 Setup and Reset
7.8 Customized Key
By configuring Customized Key  to suit your preferences, you can change the screen settings more 
conveniently.
7.8.1 Configuring Customized Key 
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Customized Key and press [ ] on the product. The following screen will 
appear.
zCan be set to 3D , ECO  or MAGIC,  Image Size .
4Press [ ] to move to the opti on you want and press the [...

63
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will 
appear.
zOff : Deactivate the off timer so that the  product does not power off automatically.
zOn: Activate the off timer so that the product powers off automatically.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
7.10 Off Timer Setting 
The off timer can be set within a ra nge of 1 to 23 hours. The product will...

64
Setup and Reset
7
7 Setup and Reset
you do not want the timer to activate, go to MENU SETUP&RESET and set Off Timer On/ Off 
to  Off.
 
7.11 Reset
Return all the settings for the product to the default factory settings.
7.11.1 Initializing Settings (Reset)
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Reset and press [ ] on the product.  The following screen will appear.
4Press [ ] to move to the opti on you want and press the [ ]....

658 INFORMATION Menu and Others
8 
INFORMATION Menu and Others
8.1 INFORMATION
View the current input source, frequency and resolution.
8.1.1 Displaying INFORMATION
1Press [ ] on the product.
2Press [ ] to move to INFORMATION. The current input source, frequency and resolution will 
appear.
8.2 Configuring Brightness in the Startup Screen
Adjust  Brightness  using the [ ] button in the startup screen where there is no on screen display menu 
available.
1Press [ ] in the startup screen.  The following...

66
INFORMATION Menu and Others
8
8 INFORMATION Menu and Others
1Press [ ] in the startup screen. The following screen will appear.
2Adjust the Volume using the [ ] button.
Volume
50
ExitEnter
Adjust
 

679 Troubleshooting Guide
9 
Troubleshooting Guide
9.1 Requirements Before Contacting Samsung Customer Service Center
9.1.1 Testing the Product
 Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, 
contact Samsung Customer Service Center.
 
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected 
to a PC, perform a...

68
Troubleshooting Guide
9
9 Troubleshooting Guide
"
Not Optimum Mode " is displayed. This message appears if the signal from the 
graphics card exceeds the maximum resolution or 
frequency for the product.
Change the maximum resolution and frequency to 
suit the product performance, referring to 
Standard Signal Mode Table (page 75).
The images on the screen look distorted. Check the cable connection to the product (Refer  to "3.3 Connecting and Using a PC")
The screen is not clear. The...

69
Troubleshooting Guide
9
9 Troubleshooting Guide
The volume is too low.
 Adjust the volume.
If the volume is still low after turning it up to the 
maximum level, adjust th e volume on your PC 
sound card or software program.
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is  booting, have your PC serviced.
Sound issue
 

70
Troubleshooting Guide
9
9 Troubleshooting Guide
9.2 Q & A
QuestionAnswer
How can I change the 
frequency? Set the frequency on your graphics card.
zWindows XP: Select 
Control Panel Appearance and 
Themes Display Settings Advanced Monitor , 
and adjust  Refresh rate  under Monitor settings .
zWindows ME/2000: Select  Control Panel Display
Settings Advanced Monitor , and adjust Refresh rate  
under  Monitor settings .
zWindows Vista: Select  Control Panel Appearance and 
Personalization Personalization...