Samsung Syncmaster S23a550h User Manual

Major Safety Precautions1-4
Maintaining the Correct Posture when Using this Product 
Be careful that adaptor should not be in contact 
with water and therefore not be wet. 
• This may cause a malfunction, electric 
shock or fire. Do not use adaptor by the 
waterside or outside particularly when it 
rains or snows. Be  careful that adaptor 
should not be wet while cleaning floor with 
water.Watching the product from too close a distance 
continuously may damage your eyesight.
Avoid using a humidifier or...

2-1Installing the Product
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
 The cleaning cloth is supplied with black high-glossy models only. 
Contents
Installation Manual Product Warranty
(Not available in all locations)  User Manual D-Sub Cable 
Power Cord DC-Adapter Stand Base Stand Body
Cover Rear Sub
OPTIONAL PARTS
HDMI Cable...

Installing the Product2-2
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Open the back cover of the stand by pushing it  toward the indicated direction (upwards at 
45°).
Place a soft...

2-2Installing the Product
Plug the data cable and power cable into corresponding ports in the monitor.
Organize the installed data cable and power cable in the stand. Put each cable into the 
groove along the stand.
Reinstall the back cover of the stand. Make sure that each cable is inside the stand.
Install cover rear sub and hide all cable conn ections under it. Installation completed.
Hold the monitor head,and put it vertical.
 

Installing the Product2-2
 • Disassembly is in the reverse order of the assembly.
• Please use the adapter and signal cables we provide in the accessory,other adapters and signal cables may not match.
• When separate purchase is needed, please check the installation state first.
 
- Caution
There is sharp edge in the stand,please caution.
- Caution
Avoiding lifting the monitor by the stand when it is lying face down.
- Caution
Avoid lifting the product holding only the stand.
 

2-3Installing the Product
2-3 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending  on the video output supported by the PC.
• When the graphics card provides D-Sub 
	Analog 

output
• Connect the [RGB IN] port of the product to t he [D-Sub] port of the PC with the D-Sub cable.
• When the graphics card provides DVI 	Digital 
 output
• Connect the [HDMI IN] port of the product to the  [DVI] port on your PC using the HDMI to DVI...

Installing the Product2-3
3.Cables can be fixed as shown .
 

2-4Installing the Product
2-4 Connecting an HDMI cable
1.Connect the HDMI output port of your  digital output device to the [HDMI IN] por t of the product using the HDMI cable.
 The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
 
 

Installing the Product2-5
2-5 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so  that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device for more information.
 You must purchase the Kensington Lock separately. 
To lock the product, follow these steps: 
1. Wrap the Kensington lock...

3-1Using the product
3 Using the product
3-1 Setting the Optimal Resolution 
If you turn the power on after purchasing the product, a message  regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
 • The message appears up to 3 times if the resolution has not been set to the optimal resolution.
• To set the resolution to the optimal resolution • When the PC is turned off, connect the product and the PC and turn the power on.
• Right-click over the...