Samsung Syncmaster S22a100n User Manual

							Using the product3-3
3-3 MagicTune
What is MagicTune?
 MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor 
functions and easy-to-understand guidelines. 
Users can adjust the product with the mouse and the keyb oard without using the operating buttons of the product.
Installing the Software
1.Visit Samsungs offcial website to download the lastest MagicTune vertion.
http://www.samsung.co m/us/consumer/learningresources/ monitor/magetune/pop_intro.html
2. Complete the remaining software installation steps a ccording to the instructions displayed on the screen.
 • The software may not work properly if you do not restart the computer after the installation.
• The  MagicTune icon may not appear depending on th e computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
 
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the  graphics card, motherboard and the networking environment. 
System Requirements
OS
•Windows XP, Windows Vista, Windows 7
Removing the Software
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1.Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu. 
2. Double-click the [Add or Remove Pr ograms] icon in the Control Panel. 
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted. 
4. Click [Change or Remove Programs] to remove the software. 
5. Select [Yes] to start removing MagicTune™. 
6. Wait until a message box appears informing you that the software has been removed completely. 
 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, 
please visit our website. 
 
 
						

							Troubleshooting4-1
4 Troubleshooting
4-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• After connectting the product to PC properly, if a blank  screen is displayed, use the Self-Diagnosis function with the 
following steps.
 
1. Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on. 
4. If the product is working properly, the  icon will appear on the screen.
In this case, if a blank screen is displayed again, make sure  that there is no problem with the PC and the connection. The 
product is working properly.
 
						

							4-2Troubleshooting
4-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A blank screen appears / I cannot turn the product on
Is the power cord connected properly? Check the connection status of the power cord.
Does the screen display  icon? Che ck the cable connecting the PC and the product.
Does the screen display  icon?This occurs when the signal from the graphics card exceeds 
the maximum resolution or th
e maximum frequency of the 
product.
In this case, set up the appropriate resolution and the fre-
quency for the product.
Does the screen display  icon and go 
black after five seconds? 1.
This icon will appear before the product goes to power-
saving mode.To restore normal operation, click the mouse 
or press any key on the keyboard.
2. When the product is in power-saving mode, the screen will 
display   icon immediately if you press 
this button, and will go to power-saving mode again in five 
seconds.
3. When the screen is displaying the   
icon, the monitor will shut down if you press this button.
The color is weird / The picture is displayed in black and white
Is the entire screen displayed in  the same color as if viewing 
the screen through a cellophane paper?  Check the cable connection to the computer.
Reinsert the graphics card in
to the computer completely.
Is the graphics card configured correctly? Set up the graphics card referring to the user manual. 
The display area suddenly moves to an edge or to the center.
Did you change the graphics card or the driver? Press this button to run the AU TO Adjustment function.
Did you change the resolution and frequency appropriate to 
the product? Set the resolution and the frequency to the appropriate values 
in the graphics card 
refer to the (Standard Signal Mode Table) 
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual. 
The pictures are out-of-focus.
Did you change the resolution and the frequency appropriate 
to the product? Set the resolution and the frequency to the appropriate values 
in the graphics card
refer to the (Standard Signal Mode Table) 
 
						

							Troubleshooting4-2
The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card.
Did you install the device driver for the product?Windows XP : Set the color again by selecting Control Panel 
→ Appearance and Themes 
→ Display → Settings. 
Windows ME/2000 : Set the color again by selecting Control 
Panel  → Display  → Settings. 
Windows Vista : Change the color settings by selecting Con-
trol Panel → Appearance and Personalization  → Personaliza-
tion  → Display settings.
Windows 7 : Change the color settings by selecting Control 
Panel  → Appearance and Personalization  → Display  → 
Adjust resolution → Advanced settings  → Monitor.
( For more information,  refer to the Windows user manual for 
the computer. )
Is the graphics card configured correctly? Configure the color again in accordance with the new graph-
ics card driver. 
A “beep, beep” sound is heard when booting the computer.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
 
						

							4-3Troubleshooting
4-3 FAQ
FAQ!PLEASE TRY THE FOLLOWING!
How can I change the frequency (refresh rate) of the video 
signal? You have to change the frequency of the graphics card.
Windows XP : Change the frequency by selecting Control 
Panel 
→ Appearance and Themes → Display → Settings 
→ Advanced → Monitor, and then change the refresh rate 
under Monitor Settings. 
Windows ME/2000 : Change the frequency by selecting Con-
trol Panel  
→ Display  → Settings → Advanced →  Monitor, 
and then change the refresh rate under Monitor Settings.
Windows Vista : Change the frequency by selecting Control 
Panel  → Appearance and Personalization  → Personalization 
→ Display settings
  →  Advanced settings → Monitor, and 
then change the refresh rate under Monitor Settings. 
Windows 7 : Change the frequency by selecting Control Panel 
→ Appearance and Personalization  → Display → Adjust reso-
lution 
→ Advanced settings → Monitor, and then change the 
refresh rate under Monitor Settings. 
(For more information , refer to the User Manual of the com-
puter or the graphics card.)
How can I change the resolution? Windows XP : Change the resolution by selecting Control 
Panel 
→ Appearance and Themes  → Display  → Settings. 
Windows ME/2000 : Change the resolution by selecting Con-
trol Panel  → Display  → Settings. 
Windows Vista : Change the resolution by selecting Control 
Panel  → Appearance and Personalization  → Personalization 
→ Display settings.
Windows 7 : Change the resolution by selecting Control Panel 
→ Appearance and Personalization  → Display → Adjust reso-
lution.
(For more information , refer to the User Manual of the com-
puter or the graphics card.)
How can I use the power saving function? Windows XP : Configure it by selecting Control Panel 
→ 
Appearance and Themes  → Display → Screen Saver Setting 
or configure it in the BIOS Setup of the computer.
Windows ME/2000 : Configure it  by selecting Control Panel → 
Display  → Screen Saver Setting or Configure it in the BIOS 
Setup of the computer. 
Windows Vista : Change settings by selecting Control Panel 
→ Appearance and Personalization  → Personalization → 
Screen Saver. You can also use the BIOS SETUP menu on 
the PC.
Windows 7 : Change settings by selecting Control Panel  → 
Appearance and Personalization  → Personalization  → 
Screen Saver. You can also use the BIOS SETUP menu on 
the PC.
( For more information,  refer to the Windows user manual for 
the computer. )
 
						

							More Information5-1
5 More Information
5-1 Specifications
 
MODEL NAMES16A100N
Panel
Size15.547 inches (39.5 cm)
Display area 34.42(H) x 19.35 cm (V)
Pixel Pitch 0 .0252 cm (H) x 0.0252 cm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical56 ~ 60 Hz
Display Color 262,144
ResolutionOptimum resolution 1366x768 @ 60 Hz
Maximum resolution 1366x768 @ 60 Hz
Input Signal, Terminated RGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high 
≥ 2.0V, V low  ≤ 0.8V)
Maximum Pixel Clock 72.8 MHz (Analog)
Power Supply This product supports 100-240 V,Since th
e standard voltage may differ from 
country to country, please check the label on the back of the product,
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight  37.33 × 24
.40 × 5.80 cm  
(  
14.7 × 9. 6 × 2.3 inches )(Without Stand)
37.33 × 32 .61 × 17.80 cm  
(
 
14.7 × 12.8 × 7.0 inches  )(Wit
h Stand) /  
1.1  
kg  
(  
2.4  lbs
 ) 
Environmen-
tal consider-
ationsOperating Operating Temperature : 32°F ~ 122°F (0°C ~ 50°C)
Humidity :10 % ~ 80 %, non-condensing
StorageStorage Temperature : -4
°F ~ 140°F (-20°C ~ 60°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°( ±2°) ~ 20°( ±2°)
cm
 
						

							5-1More Information
 
MODEL NAMES19A100N
Panel
Size18.5 inches (47 cm)
Display area 40.98 cm (H) x 23.04 cm (V)
Pixel Pitch0.0300 cm (H) x 0.0300 cm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1366x768 @ 60 Hz
Maximum resolution 1366x768 @ 60 Hz
Input Signal, Terminated RGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high 
≥ 2.0V, V low  ≤ 0.8V)
Maximum Pixel Clock 95 MHz (Analog)
Power Supply This product supports 100-240 V.Since th
e standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight  44.34 × 28
.30 × 6.01 cm
 
(  
17.5 × 11.1 × 2.4 inches  ) (Without Stand) 
44.34 × 36 .64 × 21.42 cm
  
(   
17.5  × 14.4 × 8.4 inches   ) (With 
Stand) /   
2.1 
 kg   
(  
4.6  lbs
 
)
Environmen-
tal consider-
ationsOperating Operating Temperature : 32°F ~ 122°F (0°C ~ 50°C)
Humidity :10 % ~ 80 %, non-condensing
StorageStorage Temperature : -4
°F ~ 140°F (-20°C ~ 60°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°( ±2°) ~ 20°( ±2°)
 
						

							More Information5-1
 
 Design and specifications are subject to change without prior notice.  
MODEL NAMES22A100N
Panel
Size21.5 inches (54.6 cm)
Display area 47.66 cm (H) x 26.81 cm (V)
Pixel Pitch0.0248 cm (H) x 0.0248 cm(V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1920x1080@60Hz
Maximum resolution 1920x1080@60Hz
Input Signal, Terminated RGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high 
≥ 2.0V, V low  ≤ 0.8V)
Maximum Pixel Clock 185 MHz (Analog)
Power Supply This product supports 100-240 V,Since th
e standard voltage may differ from 
country to country, please check the label on the back of the product,
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight  510.2 × 323.4 × 59.8 cm
 
(  
20.1 × 12.7 × 2.4 inches  ) (Without Stand) 
510.2 × 214.2 × 404.6 cm  
(  
20.1  × 8.4 × 15.9 inches  
) (Wit h Stand) / 
 2.5
 kg  
(
 
5.5
 
lbs
  )
Environmen-
tal consider-
ationsOperating Operating Temperature : 32°F ~ 122°F (0°C ~ 50°C)
Humidity :10 % ~ 80 %, non-condensing
StorageStorage Temperature : -4
°F ~ 140°F (-20°C ~ 60°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°( ±2°) ~ 20°( ±2°)
(USA only)
Dispose unwanted electronics  through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect,  or call (877) 278 - 0799
 This device is a Class B digital apparatus. 
 
						

							5-2More Information
5-2 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount  of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For ener gy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSav er system operates with a VESA DPM compliant video card installed in your 
computer. Use the software ut ility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumpt ion is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Consumption (Typical) S16A100N: 8 watts
0.3 watts0.3 watts
S19A100N: 17 watts
S22A100N: 25 watts
 
						

							More Information5-3
5-3 Contact SAMSUNG WORLDWIDE
 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. 
 
NORTH AMERICA
U.S.A 1-800-SAMSUNG (726-7864)http://www.samsung.com
CANADA 1-800-SAMSUNG (726-7864)http://www.samsung.com/ca
http://www.samsung.com/ca_fr (French)
MEXICO 01-800-SAMSUNG (726-7864)http://www.samsung.com
LATIN AMERICA
ARGENTINA 0800-333-3733http://www.samsung.com
BRAZIL 0800-124-421
4004-0000 http://www.samsung.com
BOLIVIA 800-10-7260http://www.samsung.com
CHILE 800-SAMSUNG(726-7864)
From mobile 02-482 82 00 http://www.samsung.com
COLOMBIA 01-8000112112http://www.samsung.com
COSTA RICA 0-800-507-7267http://www.samsung.com
DOMINICA 1-800-751-2676http://www.samsung.com
ECUADOR 1-800-10-7267http://www.samsung.com
EL SALVADOR 800-6225http://www.samsung.com
GUATEMALA 1-800-299-0013http://www.samsung.com
HONDURAS 800-27919267 http://www.samsung.com
JAMAICA 1-800-234-7267http://www.samsung.com
NICARAGUA 00-1800-5077267http://www.samsung.com
PANAMA 800-7267http://www.samsung.com
PERU 0-800-777-08http://www.samsung.com
PUERTO RICO 1-800-682-3180http://www.samsung.com
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com
VENEZUELA 0-800-100-5303http://www.samsung.com
EUROPE
ALBANIA 42 27 5755http://www.samsung.com
AUSTRIA 0810 - SAMSUNG 
(7267864,  € 0.07/min) http://www.samsung.com
BELGIUM 02-201-24-18http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr 
(French)
BOSNIA 05 133 1999http://www.samsung.com
BULGARIA 07001 33 11http://www.samsung.com
CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com