Samsung Syncmaster S22a100n User Manual

Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
Contents
Installation ManualProduct Warranty
(Not available in all locations)  D-Sub Cable  Stand Connector
Stand
Power Cord DC-Adapter
 The cables provided may vary depending on the product you purchase. 
 

2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front...

Installing the Product2-2
 Disassembly is in the reverse order of the assembly. 
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Avoid lifting the product holding only the stand.
 

2-3Installing the Product
2-3 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending  on the video output supported by the PC.
•  When the graphics card provides D-Sub 
	Analog 

output
• Connect the [RGB IN] port of the product to t he [D-Sub] port of the PC with the D-Sub cable.
2. Connect the power adapter to [DC 12V/14V] on the rear of  the product. Connect the power cord to the adapter and wall 
socket.
(The input voltage is...

Installing the Product2-3
3.Cables can be fixed as shown.
 

2-4Installing the Product
2-4 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so  that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device for more information.
 You must purchase the Kensington Lock separately. 
To lock the product, follow these steps: 
1. Wrap the Kensington lock...

Using the product3-1
3 Using the product
3-1 Standard Signal Mode Table
 This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is 
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setti ng 
the resolution to the optimal resolution of the product.
 
If the signal from the PC is one of the following standard signal  modes, the screen is set...

3-1Using the product
 
S22A100N
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY  (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/ V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.46970.08728.322 -/+
VESA, 640 x 480 31.46959.94025.175 -/-
MAC, 640 x 480 35.00066.66730.240 -/-
VESA, 640 x 480 37.86172.80931.500 -/-
VESA, 640 x 480 37.50075.00031.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600...

Using the product3-1
 
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the hori zontal cycle is called the horizon tal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on  the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical...

3-2 Product Operating Buttons
Product Operating Buttons
3-2Using the product
 The power (on/off), brightness, contrast and auto-adjust functions on this product can only be used by pressing the Power 
button.
 
FUNCTIONDESCRIPTION
On/Off To switch the screen on or  off, press and hold the Power bu tton until the screen powers on or 
off.
• To power off the product, press and hold the Power button for less than 5 seconds.
• To power on the product, press the Power button.
 For more information on the...