Samsung Syncmaster S19a450bw User Manual

Troubleshooting5-1
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform  the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on. 
4. If the product is working properly, the  message appears.
In...

5-2Troubleshooting
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A blank screen appears / I cannot turn the product on
Is the power cord connected properly? Check the connection status of the power cord.
Is the  message displayed on the 
screen? (Connected using the D-sub cable)
Check the cable connecting the PC and the product.
(Connected using the DVI cable)
If...

Troubleshooting5-2
Did you change the resolution and frequency appropriate to 
the product?Set the resolution and the frequency to the appropriate values 
in the graphics card 
refer to the (Standard Signal Mode Table) 
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual. 
The pictures are out-of-focus.
Did you change the resolution and the frequency appropriate 
to the product? Set the resolution and the frequency to the appropriate values 
in the graphics...

5-3Troubleshooting
5-3 FAQ
FAQ!PLEASE TRY THE FOLLOWING!
How can I change the frequency (refresh rate) of the video 
signal? You have to change the frequency of the graphics card.
Windows XP : Change the frequency by selecting Control 
Panel 
→ Appearance and Themes → Display → Settings 
→ Advanced → Monitor, and then change the refresh rate 
under Monitor Settings. 
Windows ME/2000 : Change the frequency by selecting Con-
trol Panel  
→ Display  → Settings → Advanced →  Monitor, 
and then change the...

More Information6-1
6 More Information
6-1 Specifications
 
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B) . It can be used in all areas. 
(Class B equipment emits less electrom agnetic waves than Class A equipment.)
 
MODEL NAMES19A450BW
Panel
Size19 inches (48 cm)
Display area408.24 mm (H) x 255.15 mm (V)
Pixel Pitch0.2835 mm (H) x 0.2835 mm...

6-2More Information
6-2 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount  of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For ener gy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSav er system operates with a VESA DPM...

More Information6-3
6-3 Specifications
 
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B) . It can be used in all areas. 
(Class B equipment emits less electrom agnetic waves than Class A equipment.)
 
MODEL NAMES19A450BR
Panel
Size19 inches (48 cm)
Display area376.32 mm (H) x 301.06 mm (V)
Pixel Pitch0.2835 mm (H) x 0.2835 mm (V)
Synchroniza-...

6-4More Information
6-4 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount  of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For ener gy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSav er system operates with a VESA DPM...

More Information6-5
6-5 Specifications
 
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B) . It can be used in all areas. 
(Class B equipment emits less electrom agnetic waves than Class A equipment.)
 
MODEL NAMES19A450MW
Panel
Size19 inches (48 cm)
Display area408.24 mm (H) x 255.15 mm (V)
Pixel Pitch0.2835 mm (H) x 0.2835 mm (V)
Synchroniza-...

6-6More Information
6-6 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount  of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For ener gy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSav er system operates with a VESA DPM...