Samsung Syncmaster S19a10n User Manual

Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
 The cables provided may vary depending on the product you purchase. 
Contents
Quick Setup GuideProduct Warranty
(Not available in all locations) D-Sub Cable  Stand Connector
Stand Power Cord
 

2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front...

Installing the Product2-2
 Disassembly is in the reverse order of the assembly. 
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Avoid lifting the product holding only the stand.
 

2-3Installing the Product
2-3 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending on the video output supported by the PC.
•  When the graphics card provides D-Sub
	Analog

output
• Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
2.To use the product, connect the power cable to a power outlet and the [POWER] port on the product.
(The input voltage is switched automatically.)
 When the...

Installing the Product2-4
2-4 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device for more information.
 You must purchase the Kensington Lock separately. 
To lock the product, follow these steps: 
1.Wrap the Kensington lock...

3-1Using the product
3 Using the product
3-1 Standard Signal Mode Table
 This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is 
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting 
the resolution to the optimal resolution of the product.
 
If the signal from the PC is one of the following standard signal modes, the screen is set...

Using the product3-2
3-2 Product Operating Buttons
Product Operating Buttons
 The power (on/off), brightness, contrast and auto-adjust functions on this product can only be used by pressing the Power 
button.
 
FUNCTIONDESCRIPTION
On/Off To switch the screen on or off, press and hold the Power button until the screen powers on or 
off.
• To power off the product, press and hold the Power button for less than 5 seconds.
• To power on the product, press the Power button.
 For more information on the...

3-3Using the product
3-3 MagicTune
What is MagicTune?
 MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor 
functions and easy-to-understand guidelines. 
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1.Visit Samsungs offcial website to download the lastest MagicTune vertion.
HTTP://WWW.SAMSUNG.COM
2.Complete the remaining software installation steps...

Troubleshooting4-1
4 Troubleshooting
4-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• After connectting the product to PC properly, if a blank screen is displayed, use the Self-Diagnosis function with the 
following steps.
 
1.Turn the product and the PC off.
2.Separate the signal cable from the product .
3.Turn the product on. 
4.If the product is working properly, the  icon will appear on the screen.
In this case, if a blank screen is...

4-2Troubleshooting
4-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A blank screen appears / I cannot turn the product on
Is the power cord connected properly? Check the connection status of the power cord.
Does the screen display  icon? Check the cable connecting the PC and the product.
Does the screen display  icon?This occurs when the signal from the graphics...