Samsung Syncmaster P2470hd User Manual

Using the Product3-3
Installing Batteries in the Remote Control 
1.Lift the cover at the back of the remote control upward as shown in the figure.
2.Install two AAA size batteries.
 Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 
3.Close the cover.
 Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus and...

3-4Using the Product
3-4 Teletext Feature
Most television stations provide written information services via Teletext. The index page of the teletext service gives you 
information on how to use the service. In addition, you can select various options to suit your requirements by using the 
remote control buttons.
 For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing 
or some pages may not be displayed.
You can change teletext pages by...

Using the Product3-5
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Available Modes
The icons below represent the input signals that are displayed when selecting an item in the Source List.
TOP MENUSSUB MENUS
Picture
[PC / DVI]MagicBright Contrast Brightness Sharpness Auto Adjustment
Screen Picture Options Picture Reset
Picture
[TV / Ext. / Component / 
HDMI]Mode Backlight Contrast Brightness Sharpness
Color Tint (G/R) Advanced...

3-5Using the Product
Picture [PC / DVI ]
 The default setting may be different depending on the selected Input Mode (input signal source selected in External Input 
List) and the selected resolution
 
MENUDESCRIPTION
MagicBright   is a feature providing an optimum viewing environment depending on the contents of 
the image you are watching. Currently five different modes are available: , , 
,  and . Each mode has its own pre-configured brightness 
value. 
•
 High Brightness
 For watching motion pictures...

Using the Product3-5
Picture [ TV / Ext. / Component / HDMI ] 
Screen • 
Removes noise such as vertical stripes.
 adjustment may move the screen image area. You may relocate it to the center using 
the horizontal control menu
•
Removes noise such as horizontal stripes.
If the noise persists even after  tuning, repeat it after adjusting the frequency (Coarse).
• 
Adjusts the screen location horizontally and vertically.
• 
Image parameters are replaced with the factory default values.
 Available in  Mode...

3-5Using the Product
MENUDESCRIPTION
Mode You can select the type of picture which best corresponds to your viewing requirements.
You can activate either ,  or .
• 
Selects the picture for high-definition in a bright room.
• 
Selects the picture for optimum display in a normal environment.
•
Selects the picture for viewing movies in a dark room.
 Press the [TOOLS] button to display the Tools menu. You can also set the  by 
selecting →.
Backlight / Contrast / 
Brightness / Sharp-
ness / Color / Tint (G/...

Using the Product3-5
Picture Options • 
The tone of the color can be changed.
•  -  -  - 
 •  or  is only activated when the picture mode is .
• Settings can be adjusted and stored for each external device you have connected to an 
input of the TV.
 
• 
 You can switch the Size.
•  - Automatically adjusts the picture size to the 16:9 aspect ratio. 
•  - Adjusts the picture size to 16:9 appropriate for DVD or wide broadcasting. 
•  - Magnify the size of the picture more than 4:3. 
•  - Magnifies the 16:9...

3-5Using the Product
Sound
Picture Options • 
Digital Noise Reduction. 
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
•  -  -  -  - 
• 
When a DVD or set-top box is connected to your TV via , it may cause a degradation in the 
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., 
depending on the external device connected. In this...

Using the Product3-5
MENUDESCRIPTION
Mode • 
 Choose Standard for the standard factory settings.
• 
 Choose Music when watching music videos or concerts.
•
 Choose Movie when viewing movies.
• 
 Emphasizes voice over other sounds.
• 
 Choose Custom if you want to adjust the settings according to personal preference .
 Press the [TOOLS] button to display the Tools menu. You can also set the  by 
selecting  → .
Equalizer  You can adjust the left and right sound balance and equalizer settings as required.
•...

3-5Using the Product
Selecting the Sound Mode
You can set the sound mode in the Tools menu. When you set to Dual l ll the current sound mode is displayed on the screen
 If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
 
Audio Description This is an auxiliary audio function that provides an additional audio track for visually...