Samsung Syncmaster P2370hd User Manual

							Using the Product3-3
Installing Batteries in the Remote Control
1.Lift the cover at the back of the remote control upward as shown in the figure.
2.Install two AAA size batteries.
 Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 
3.Close the cover.
 Remove the batteries and store them in a cool, dry place if you wont be using the remote control for a long time.
If the remote control doesnt work, check the following :
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
 
 
						

							3-4Using the Product
3-4 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Available Modes
The icons below represent the input signals that are displayed when selecting an item in the .
TOP MENUSSUB MENUS
Picture
[PC / DVI]MagicBright Contrast Brightness Sharpness Auto Adjustment 
Screen Picture Options Picture Reset
Picture
[TV / AV / Component / 
HDMI]Mode Backlight Contrast  Brightness Sharpness
Color Tint (G/R) Advanced Set-
tings Picture Options Picture Reset
Sound Mode Equalizer SRS TruSur-
round HDPreferred Lan-
guageMulti-Track 
Sound
Auto Volume Speaker Select Sound Reset
Channel Antenna Auto Program Clear Scram-
bled ChannelChannel List Fine Tune
Setup Plug & Play  Language Time Game Mode V-Chip
Caption Light Effect Light Level Melody Energy Saving
Input Source List Edit Name
Application Anynet+ (HDMI-
CEC)
Support Self Diagnosis Software 
UpgradeHD Connection 
GuideContact Sam-
sung
 Indicates the signal when  or  is selected in the .
This is the PC video signal that is connected to and input through the [PC] or [DVI] terminals.
Indicates the signal when  is selected in the .
This is the video signal input through the [VIDEO] terminal.
Indicates the signal when  is selected in the .
This is the signal input through the [HDMI] terminal.
Indicates the signal when  is selected in the .
This is the signal input through the [ANT IN] terminal.
Indicates the signal when  is selected in the .
This is the signal input through the [COMPONENT] terminal.
 
						

							Using the Product3-4
Picture [PC / DVI ]
 The default setting may be different depending on the selected Input Mode (input signal source selected in External Input 
List) and the selected resolution
 
MENUDESCRIPTION
MagicBright   is a feature providing an optimum viewing environment depending on the contents of 
the image you are watching. Currently five different modes are available: , , 
,  and . Each mode has its own pre-configured brightness 
value. 
•
 High Brightness
 For watching motion pictures such as a Blu-Ray or DVD.
• 
 For working with a mixture of images such as texts and graphics.
• 
For documents or work involving heavy text.
• 
 automatically detects the distribution of the visual signal and adjusts to 
create an optimum contrast.
• 
Although the values are carefully chosen by our engineers, the pre-configured values may not be 
comfortable to your eyes depending on your taste.
If this is the case, adjust the  and  by using the OSD menu.
 Press the [TOOLS] button to display the Tools menu. You can also set the  by 
selecting →.
Contrast / Brightness / 
Sharpness You can use the on-screen menus to change the contrast and brightness according to personal pref-
erence.
•  - Adjusts the contrast level of the picture.
•  - Adjusts the brightness level of the picture.
•  - Adjusts the edge definition of the picture.
Auto Adjustment  The values of ,  and  are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
 Available in  Mode Only 
 Press the [TOOLS] button to display the Tools menu. You can also set the by 
selecting →.
 
						

							3-4Using the Product
Picture [ TV / AV / Component / HDMI ] 
Screen • 
Removes noise such as vertical stripes.
 adjustment may move the screen image area. You may relocate it to the center using 
the horizontal control menu
•
Removes noise such as horizontal stripes.
If the noise persists even after  tuning, repeat it after adjusting the frequency (.)
• 
Adjusts the screen location horizontally and vertically.
• 
Image parameters are replaced with the factory default values.
 Available in  Mode Only 
Picture Options • 
The tone of the color can be changed.
 Available in  /  mode only 
•  -  -  - 
•  - < G-Gain > - 
Adjusts the individual R, G, B (Red, Green, Blue) color controls.
• 
 You can switch the Size.
•  - 
Picture Reset  Picture parameters are replaced with the factory default values.
•  - 
MENUDESCRIPTION
 
						

							Using the Product3-4
MENUDESCRIPTION
Mode The Monitor has three automatic picture settings (, , and ) that are 
preset at the factory.
You can activate either , , or .
• 
Selects the picture for high-definition in a bright room.
• 
Selects the picture for optimum display in a normal environment.
•
Selects the picture for viewing movies in a dark room.
 Press the [TOOLS] button to display the Tools menu. You can also set the  by 
selecting →.
Backlight / Contrast / 
Brightness / Sharp-
ness / Color / Tint (G/
R)Your television has several setting options that allow you to control the picture quality. 
•  - Adjusts the brightness of LCD back light.
•  - Adjusts the contrast level of the picture.
•  - Adjusts the brightness level of the picture.
•  - Adjusts the edge definition of the picture.
•  - Adjusts color saturation of the picture.
•  - Adjusts the color tint of the picture.
Advanced Settings Samsung‘s new TVs allow you to make even more precise picture settings than previous models. 
See below to adjust detailed picture settings.
  is available in  or  mode. 
•  - You can select the level on the screen to adjust the screen depth.
•  -  -  - 
•   -You can adjust the screen contrast so that the optimal contrast is provided.
•  -  -  - 
•  - You can adjust the Primary Color (Red, Green, Blue) Intensity.
•  -   is a color matrix composed of red, green and blue colors. Select 
your favorite  to experience the most natural color. 
•  - 
•  - You can adjust the color temperature for more natural picture colors.
•  -  -  -  -  -  - 
•  - You can emphasize the pink  in the picture.
 Changing the adjustment value will refresh the adjusted screen. 
•  -   You can emphasize object boundaries in the picture.
•  - 
 
						

							3-4Using the Product
Picture Options • 
The tone of the color can be changed.
•  -  -  - 
 •  or  is only activated when the picture mode is .
• Settings can be adjusted and stored for each external device you have connected to an 
input of the TV.
 
• 
 You can switch the Size.
The direct button on the remote control is [P.SIZE] button. 
•  - Sets the picture to 16:9 wide mode. 
•  - Magnifies the size of the picture on the screen. 
•  - Magnifies the size of the picture more than . 
•  - Enlarges the aspect ratio of the picture to fit the entire screen. 
•  - Sets the picture to 4:3 normal mode. 
•  - Use the function to see the original image with no cut-off with HDMI (720p/ 1080i 
/ 1080p), Component (1080i / 1080p) or DTV (1080i) input signals. 
 • After selecting ,  or : Press the ▲or▼ button to select 
, then press the [ ] button. Press the ▲or▼ button to move the picture up 
and down.
• Reset : Press the ▲or▼ button to select Reset , then press the [ ] button. You can 
initialize the setting.
• Settings can be adjusted and stored for each external device you have connected to an 
input of the TV.
• ,  (480i,480p) 
- , , , 
•  (1080i),  (1080i, 1080p) ,(720p,1080i,1080p)
 - , , , 
 
• 
Digital Noise Reduction. 
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
•  -  -  -  - 
• 
You can directly select the black level on the screen to adjust the screen depth.
 This function is active only when the external device is connected via .The  function may not be compatible with all external devices.
 
•  -  
• 
The  feature offers you a theater-quality viewing experience. 
  is supported in ,  (480i / 1080i) and (480i / 1080i) 
•  -  
Picture Reset  Picture parameters are replaced with the factory default values.
•  - 
MENUDESCRIPTION
 
						

							Using the Product3-4
Sound
MENUDESCRIPTION
Mode • 
 Choose Standard for the standard factory settings.
• 
 Choose Music when watching music videos or concerts.
•
 Choose Movie when viewing movies.
• 
 Emphasizes voice over other sounds.
• 
 Choose Custom if you want to adjust the settings according to personal preference .
 Press the [TOOLS] button to display the Tools menu. You can also set the  by 
selecting →.
Equalizer  You can adjust the left and right sound balance and equalizer settings as required.
•  - You can select a sound mode to suit your personal preferences. 
•  - You can adjust the left and right sound balance and equalizer settings as required. 
•  -  -  -  -  -  
SRS TruSurround HD  is a patented SRS technology that solves the problem of playing 5.1 multi-
channel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker play-
back system, including internal television speakers. It is fully compatible with all multichannel formats.
•  - 
Preferred Language Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, 
simultaneous translations of the program into foreign languages).
•  -  - 
 • You can listen in a language other than the Preferred Language by pressing the MTS button 
on the remote control.
• Preferred Language is available only in Digital TV mode.
• You can only select the language from among the actual languages being broadcast.
 
 
						

							3-4Using the Product
Channel
Multi-Track Sound  • 
 Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo 
signal.
• 
 Choose for channels that are broadcasting in stereo.
• 
 Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
 Available in Analog  Mode Only 
Auto Volume Reduces the differences in volume level among channels.
•  - 
Speaker Select When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen 
to sound from the Home theater’s (external) speakers.
•  
Used to listen to the sound of the External (Home Theater) Speakers.
• 
Used to listen to the sound of the TV Speakers.
 • If you select  in the  menu, the sound settings will be 
limited.
• The volume and [MUTE] buttons do not operate when the  is set to 
. Please set the volume on your Home theater.
 
Sound Reset You can restore the Sound settings to the factory defaults.
•  -  - 
 : Current sound values return to default settings.  
MENUDESCRIPTION
 
						

							Using the Product3-4
MENUDESCRIPTION
Antenna You can select antenna or cable TV.
If [ANT IN] connected, select the antenna input you want. If the antenna input is not selected prop-
erly, noise may appear on the screen.
•  - 
Auto Program  The TV automatically cycles through all of the available channels and stores them in memory.
In rare cases,  may miss a few channels due to weak signals and the channels may 
not be added to the channel memory.
•  -  - 
Clear Scrambled 
Channel The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program 
is completed. It removes the scrambled channels from the list by tuning the digital cable channels. 
This process may take up to 20~30 minutes.
 This function is only available in  mode. 
 
						

							3-4Using the Product
Channel List Using this menu, you can add / delete or set favorite channels and use the program guide for digital 
broadcasts.
You can select these options by simply pressing the [CH LIST] button on the remote control.
•  - Shows all currently available channels.
•  - Shows all added channels.
•  - Shows all favorite channels.
 Press the [TOOLS] button to display the  menu. You can also set the add to (or delete 
from) Favorites by selecting → (or ).
 To select the favorite channels you have set up, press the [FAV.CH] button on the remote 
control
 
•  - Shows all current reserved programs.
 • Select a channel in the ,  or  screen by 
pressing the ▲ / ▼ buttons, and pressing the [ ] button. Then you can watch the 
selected channel.
• Using the Color buttons with the Channel List
•  : Enlarges or shrinks a channel number.
•  : Selects multiple channel lists. You can perform the add / delete or add to 
Favorite / delete from Favorite function for multiple channels at the same time. Select 
the required channels and press the yellow button to set all the selected channels at 
the same time. The   mark appears to the left of the selected channels.
•  : Displays the  (or ),  (or ), , ,  (or ) 
and  menus (The Options menus may differ depending on the 
situation.)
• Channel Status Display Icons
• : A channel set as a Favorite.
• : A channel selected by pressing the yellow button.
• : A Program currently being broadcast.
• : A reserved program.
 
Fine Tune Use fine tuning to manually adjust a particular channel for optimal reception.
 • If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk  on the right-
hand side of the channel number in the channel banner.
• To reset the fine tuning setting, press the ▼ button to select Reset, then press the [ ] 
button.
  Only Analog TV channels can be fine tuned. 
MENUDESCRIPTION