Samsung Syncmaster P2370h User Manual

Using the Product3-4
Setup
MENUDESCRIPTION
Plug & Play This brings up the menu items that appeared when you first plugged in the TV.
Language You can set the menu language.
The language chosen affects only the language of the OSD. 
Time • 
Setting the clock is necessary in order to use the various timer features of the TV.
 • The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
 
• 
 You can set up the current time...

3-4Using the Product
Time • 
The sleep timer automatically shuts off the TV after a preset time .
•  -  -  -  -  -  - 
 Press the [TOOLS] button to display the Tools menu. You can also set the sleep timer by 
selecting →.
 To cancel the  function, select . 
•  /  / 
Three different on / off timer settings can be made. You must set the clock first.
• 
Set the , , , and .
(To activate the timer with the setting ve chosen, set to Activate.)
• 
Set the , , , and .
(To activate the timer with the setting...

Using the Product3-4
V-Chip (U.S.A only) The  feature automatically locks out programs that are deemed inappropriate for children. 
The user must enter a PIN (personal ID number) before any of the  restrictions are set up or 
changed.
 •  function is not available in ,  or  mode.
• The default PIN number of a new TV set is 0-0-0-0
• If you forget the PIN, press the remote-control buttons in the following sequence, which 
resets the pin to 0-0-0-0 : [POWER](off)→[MUTE]→8→2→4→[POWER] (on).
• : Press to...

3-4Using the Product
Caption(On-Screen 
Text Messages)• 
You can switch the caption function on or off. If captions are not available, they will not be 
displayed on the screen.
•  - 
 • Press the [CC] turn the Caption on or off.
• The  feature doesn’t work in ,  or  modes.
 
• 
You can select the desired caption mode.
 • The availability of captions depends on the program being broadcast.
•  -~ -~ (analog channels only)
The Analog Caption function operates in either analog TV channel mode or when a...

Using the Product3-4
Input
Melody  A melody sound can be set to come on when the monitor is powered On or Off. 
•  -  -  - 
 The  does not play
• When no sound is output from the TV because the [MUTE] button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum 
with the volume [-] button
• When the TV is turned off by  function
 
Energy Saving  This feature adjusts the brightness of the TV in order to reduce power consumption. When watching 
TV at night,...

3-4Using the Product
Application
Connecting Anynet+ Devices
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding  device using an HDMI 
cable.
2. Connect the [ HDMI IN] jack of the home theatre and the HDMI OUT ja ck of the corresponding  device using an 
HDMI cable. 
 Connect the Optical cable between the [D IGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input 
on the Home Theatre. 
When following the connection above, the Optical jack only ou tputs 2...

Using the Product3-4
Setting Up Anynet+
 Press the [TOOLS] button to display the Tools menu. You can also display the  menu by selecting 
→
Setup
Device List
1. Press the [TOOLS] button. Press the  [ ] button to select .
2. Press the   or   button to select , then press the  [ ] button.
 -  devices connected to the TV are listed.
MENUDESCRIPTION
Anynet+ (HDMI-CEC)  To use the  Function,  must be set to On. 
 When the function is disabled, all the< Anynet+> related operations 
are deactivated. 
 
Auto...

3-4Using the Product
 - If you cannot find a device you want, press the red button to scan for devices.
3. Press the   or   button to select a particular device and press the  [ ] button. It is switched to the selected device. 
 -  must be set to On in the  menu for the  menu to appear.
 Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching 
operation. 
The time required to scan for devices is determined by the number of connected devices. 
When...

Using the Product3-4
MENUDESCRIPTION
Self Diagnosis   • 
If you think you have a picture problem, perform the picture test. Check the color pattern on the 
screen to see if the problem still exists. 
•  : If the test pattern does not appear or there is noise in the test pattern, select . 
There may be a problem with the TV. Contact Samsung‘s call center for assistance.
•  : If the test pattern is properly displayed, select . There may be a problem with your 
external equipment. Please check your...

3-5Using the Product
3-5 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics 
website (www.samsung.com), and download the driver.
 
1.Insert the driver installation CD into the CD-ROM drive.
2.Click on Windows Driver.
3.Select the model of your product from the model list....