Samsung Syncmaster P2270h User Manual

							Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
 The cleaning cloth is supplied with black high-glossy models only. 
CONTENTS
Installation Manual Product Warranty User ManualDVI-A to D-Sub Cable
(Not available in all locations)
Power Cord DC-AdapterCleaning Cloth Stand Connector
Stand
OPTIONAL PARTS
HDMI Cable DVI Cable
 
						

							2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the  stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the cloth 
so that the front of the product is facing downwards.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in  the direction of the arrow as shown in the 
figure.
 
						

							Installing the Product2-2
- Caution
Avoid lifting the product holding only the stand.
 
						

							2-3Installing the Product
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product faces downwards.
Hold the main body of the product with your hand as shown by the figure. 
Pull the stand in the direction of the arrow as shown in the figure to separate it.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by  pulling it in the direction of the arrow as 
shown in the figure.
 
						

							Installing the Product2-4
2-4 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending  on the video output supported by the PC.
• When the graphics card provides D-Sub () output • Connect the [DVI IN] port of the product to the [D-S ub] port on your PC using the DVI-A to D-Sub cable.
• When the graphics card provides DVI() output • Connect the [DVI IN] port of the product to  the [DVI] port of the PC with the DVI cable.
2. Connect one end of the power cord to the DC-Adapter and pl ug the other end into a dedicated 220V or 110V wall outlet.
(The input voltage is switched automatically.)
 When the product is connected to a PC,  you can turn the product on and use it.
When both the DVI () and D-Sub () cables  are connected, you can select the input signal  by pressing the   button.
 
 
						

							2-5Installing the Product
2-5 Connecting an HDMI cable
1.Connect the HDMI output port of your  digital output device to the [HDMI IN] por t of the product using the HDMI cable.
2. Connect a speaker to the [AUDIO OUT] port of the product.
 This product wont make any sound when only the  HDMI cable is connected without a speaker connected.
When all the connections are complete, you can turn on and  use the product and your DVD player (or digital output 
device).
Press the   button and select  as an input signal.
 
 
						

							Installing the Product2-6
2-6 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so  that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking 
direction. 
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electron ics store, an online shop, or our service center. 
 
						

							3-1Using the product
3 Using the product
3-1 Setting the Optimal Resolution 
If you turn the power on after purchasing the product, a message  regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
 • The message appears up to 3 times if the resolution has not been set to the optimal resolution.
• To set the resolution to the optimal resolution • When the PC is turned off, connect the product and the PC and turn the power on.
• Right-click over the Desktop and select Properties from the pop-up menu.
• In the Settings tab, set the resolution to the optimal resolution.
 
▲/▼  : You can select a language with these buttons.
MENU : If you press this button, the message disappears.
 
						

							Using the product3-2
3-2 Standard Signal Mode Table
 The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent 
characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting 
the resolution to the optimal resolution of the product.
 
If the signal from the PC is one of the following standard signal  modes, the screen is set automatically. However, if the signal from 
the PC is not one of the following signal modes, a blank scree n may be displayed or only the Power LED may be turned on. 
Therefore, configure it as follows referring to the User Manual of the graphics card.
P2070H
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/ V)
IBM, 720 x 400 31.46970.08728.322 -/+
MAC, 640 x 480 35.00066.66730.240 -/-
MAC, 832 x 624 49.72674.55157.284 -/-
MAC, 1152 x 870 68.68175.062100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.15656.250 36.000 +/+
VESA, 800 x 600 37.87960.317 40.000 +/+
VESA, 800 x 600 48.07772.188 50.000 +/+
VESA, 800 x 600 46.87575.000 49.500 +/+
VESA, 1024 x 768 48.36360.00465.000 -/-
VESA, 1024 x 768 56.47670.06975.000 -/-
VESA, 1024 x 768 60.02375.02978.750 +/+
VESA, 1152 x 864 67.50075.000108.000 +/+
VESA, 1280 x 800 49.70259.81083.500 -/+
VESA, 1280 x 800 62.79574.934106.500 -/+
VESA, 1440 x 900 55.93559.887106.500 -/+
VESA, 1440 x 900 70.63574.984136.750 -/+
VESA, 1600 x 900 60.00060.000108.000 +/+
 
						

							3-2Using the product
P2270H
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the hori zontal cycle is called the horizon tal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on  the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/ V)
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 800 x 600 35.15656.250 36.000 +/+
VESA, 800 x 600 37.87960.317 40.000 +/+
VESA, 1024 x 768 48.36360.00465.000 -/-
VESA, 1280 x 800 49.70259.81083.500 -/+
VESA, 1280 x 960 60.00060.000108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1440 x 900 55.93559.887106.500 -/+
VESA, 1600 x 1200 75.000 60.000 162.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+