Samsung Syncmaster P2270 User Manual

You can choose one of nine languages.
 Note
The language chosen affects
only the language of the OSD.
It has no effect on any software
running on the computer.
MENU →   ,   →   →   ,   →
 →  ,   → MENU
LED On/Off
You can set the LED lamps of the menu buttons to be permanently turned o\
n. MENU →   ,   →   →   ,   →
 →  ,   → MENU
• Off •On
LED Brightness Adjusts the brightness of the Power LED. MENU →   ,   →   →   ,   →
 →  ,   → MENU
Off Timer On/Off You can enable or disable the Off Time function....

MENU →   ,   →   →   ,   →
 →   ,   →MENU
• Off •On
Off Timer Setting The monitors will turn off automatically at the specified time.  
MENU → 
 ,   →   →   ,   →
 →   ,   →MENU
•
Auto Source Select Auto Source for the monitor to automatically select the signal source. MENU →   ,   →   →   ,   →
 →   ,   → MENU
• Auto •Manual Adjusting the Monitor 

AV Mode
MENU →   ,   →   →   ,   →
 →   ,   → MENU
• Off •On
This function allows the screen to be displayed at the optimal quality i\
n accordance with the
size of the screen when a 480P, 576P, 720P, 1080i, or 1080P video signal\
 is input in DVI
mode.
Set to Off when connected to a PC. 
Set to On when connected to an AV device.
If not set to On, the screen may not be displayed normally.
(Unavailable in  Analog mode)
Display Time The menu will be automatically turned off if no adjustments are made for\...

MENU →   ,   →   →   ,   →
 →   ,   →MENU
 INFORMATION
Shows a video source, display mode on the OSD screen. MENU →   ,   →MENU
Adjusting the Monitor 

Troubleshooting
Self-Test Feature Check-- P2070, P2070G --
 Note
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2.Unplug the video cable from the back of the computer.
3.
Turn on the monitor.If the monitor is functioning properly, you will see a box in the illust\
ration below. This box appears during normal operation if the video cable becomes disc\
onnected or...

Remove all electronic devices such as radios, fans, clocks and telephone\
s that are within 3
feet (one meter) of the monitor.
Useful Tips A monitor recreates visual signals received from the computer. Therefore\
, if there is a problem
with the computer or the video card, this can cause the monitor to becom\
e blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case,\
 first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the...

A: Adjust the maximum resolution and frequency that the monitor can handle \
properly.
A:
If the display exceeds SXGA or 75 Hz, a Not Optimum Mode, Recommended
Mode 1600 x 900 60 Hz message is displayed. If the display exceeds 85 Hz, t\
he display
will work properly but the  Not Optimum Mode, Recommended Mode 1600 x 900
60 Hz message appears for one minute and then disappears.
Please change to the recommended mode during this one-minute period.
(The message is displayed again if the system is rebooted.)...

(Refer to the Preset Timing Modes).
Q: The screen can be unbalanced due to the cycle of the video card signals.\
 Readjust
Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the resolution or frequency on the monitor?
A: Adjust the resolution and frequency of the video card.(Refer to the Preset Timing Modes).
LED is blinking but no images on the screen. Q:
Is the frequency properly adjusted when checking the Display Timing on t\
he menu?
A: Adjust...

Check if the scanning ratio of the video screen is set to between 56 Hz \
~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)
If you have problems in installing the adapter (video) driver, boot th\
e computer in Safe Mode,
remove the Display Adapter in the Control Panel 
→ System → Device Administrator and
then reboot the computer to reinstall the adapter (video) driver.  Note
If problems repeatedly occur, contact an authorized service center.
Q & A Q:How can I change the frequency?
A:
The...

 Note
Before calling for assistance, check the information in this section to \
see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer .
Self-Test Feature Check-- P2270, P2370, P2270G, P2370G --  Note
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2.Unplug the video...