Samsung Syncmaster Nc190 User Manual

Installing the Software4-1
administrator to correct it.
•   The  field is the device’s gateway IP address. If DHCP  is disabled, this field is required. If DHCP is enabled, 
this field is not editable.
•   The  field is the device’s primary DNS  IP address. This field is optional. If DHCP is enabled, this 
field is not editable.
•   The  field is the device’s secondary DN S IP address. This field is optional. If DHCP is enabled, 
this field is not editable.
•  The  is the domain name used, e.g....

4-1Installing the Software
If the  allows the administrator to give the Host or Portal a logical name.  The default is pcoip-host-
MAC or pcoip-portal-MAC where MAC is  the Host or Portal’s MAC address. 
•  The  allows the adm inistrator to give the Host or Portal a description or more information, e.g. 
location of endpoint, etc.
The  is not used by the PCoI P Firmware and is provided strictly for administrator use.
•  The  allows the administrator to give the Host or Portal a generic tag information....

Installing the Software4-1
• 
The  field controls whether connect ion management specific debug messages are written to the 
event log of the PCoIP Host and Portal devices.
 Tab
The  configuration  tab allows the use of features that ease the discovery  of Portals in a PCoIP system.
 The Discovery parameters can also be configured using the Webpage Administration Interface. 
Figure :  Configuration 
•  If the option is enabled, the device wi ll dynamically discover peer devices using SLP Discovery,...

4-1Installing the Software
• 
The  allows the administrator to configure the Portal for a PCoIP session or RDP session.
•  
The  selector allows the administrator to  choose whether the peer device is identified by IP and MAC 
address or by Fully Qualified Domain Name (FQDN).
Table 2-2 shows the peer identity parameters available when  either method is chosen. If an invalid IP address or DNS 
name is entered, the OSD will prompt  the administrator to correct it.
Table 2-2: Peer Identity Methods
•   The...

Installing the Software4-1

The  field is the  screen resolution setting. Possible values are:
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The  is the  session colour bit depth. Possible values are:
• (bits per pixel)
• 
• 

The  field sets the port  number that the  client connects to.

The  field configures where the audio playba ck occurs for the  session. Possible options are:
•  
• 
• 

The  field enables the use of wallpaper with the  session.

The  field enables the use of desktop themes with the  session....

4-1Installing the Software
 The Language parameters can also be configured using the Webpage Administration Interface.  
Figure :  Configuration

The  field allows configures the langua ge of the OSD and user level event log messages.

The  field allows the administrator to change the keyboard layout.
 Tab
The  tab allows the administrator to modify the On Screen Display () parameters.
 The OSD parameters can also be configured using the Webpage Administration Interface. 
Figure :  Configuration

The...

Installing the Software4-1
characters. 
The screen-screen saver is a simple black screen with the screen-saver text jumping randomly.

The  field allows the administrator to configure the screen-saver timeout. The timeout can be 
configured in seconds, up to 9999 seconds. A setting of 0 seconds disables the screen-saver.
 Tab
The  tab allows the administrator to reset  all the configurable parameters stored in flash.
 The Reset can also be initiated using the Webpage Administration Interface. 
Figure  :...

4-1Installing the Software

When the  option is enabled, the Portals can be configured for use with a VMware View Connection 
Server.
 To enable the VMware View feature, the  checkbox on the  tab must be unchecked.
 

The  selector  allows the administrator to choose whether the connection manager is identified 
by IP address or by Fully Qualified Domain Name (FQDN). If VMware View is disabled, this field is not required and is not 
editable.

The  parameter allows the administrator to specify the port...

Installing the Software4-1
 The  (terse or verbose) can also be initiated using the Webpage Administration Interface. 
Figure  : 

The  field displays log messages with  time stamp information. There are two associated buttons 
available.
•
Selecting the  button refreshes  the event log messages displayed. 
• 
Selecting the  button clears a ll of the displayed event log messages.
 Tab
The  tab allows the administrator to view  PCoIP-specific statistics for the last PCoIP session that was 
active on the...

4-1Installing the Software
 
•  
The  field reports the total number of PC oIP packets sent from the Portal to the Host in the last 
active session.
•  The  ield reports the total number of  PCoIP packets received from the Host to the Portal in the 
last active session. 
•  
The  field reports the total number  of PCoIP packets lost in the last active session. 

•  
The field reports the total number  of bytes sent in the last active session. 
• 
The  field reports the total numbe r of bytes received in...